Alloy Pipe Plate Bar and Fittings That Survive the Media You Run
Shaanxi Jiade Group rolls, draws and forges stainless steel and nickel alloy in Xi'an and ships it to 12 countries with mill test certificates and third party inspection.
One Mill for 200 300 and 400 Series Plus Nickel Alloys
From 201 decorative tube to Hastelloy C-276 and Inconel 625, the same works covers your whole bill of material instead of four separate vendors.
Pipe Spools Finished Without Waiting on a Missing Fitting
Elbows tees reducers and flanges in the same heat and the same grade as the pipe, 7 days from stock and 15 days made to order.
Material Paperwork That Clears Customs and Clears Your Inspector
Mill test certificates, EN 10204 3.1 documents and inspection by SGS BV DNV TUV or LR arranged before the container leaves Shanghai.
- Established 1992 in Xi'an
- 25000 m2 works, 320+ staff
- 40000 tons a year
- PED 2014/68/EU · CCS · TUV AD 2000 W0
- Exported to 12 countries
Four Product Families One Metallurgical Specification
Stainless steel and nickel alloy in four forms: seamless and welded pipe, sheet and plate, round square flat and hexagonal bar, and butt weld fittings and flanges. Grades run from 201 and 304 through duplex 2205 and 2507 to 904L, Monel, Inconel and Hastelloy.
Piping fabricators, pressure vessel builders, chemical and phosphoric acid plants, refineries, power and nuclear contractors, marine and offshore yards, food and pharmaceutical equipment makers, and distributors who resell alloy stock.
Browse All 35 ProductsThe Problem We Solve
Most alloy failures are a specification problem, not a supply problem: the wrong grade for the medium, a weld that sensitised, a fitting that did not match the schedule, or paperwork that did not satisfy the inspector. We fix those before the material ships.
Why Buyers Stay With Us
A works established in 1992 over 25000 square metres with more than 320 employees and 40000 tons of annual output, exporting to twelve countries, with PED CCS and TUV approvals and third party inspection by SGS BV DNV LR and others on request.
Pipe Sheet Bar Fittings and Special Alloy
Five categories covering 35 products, each one organised by the service it has to survive rather than by what is cheapest to roll.
Stainless Steel Pipe
Seamless and welded stainless pipe from 10 mm to 1219 mm, in round square and rectangular section, across 201 304 316L…
Explore the range →
Stainless Steel Sheet
Cold rolled 0.3 to 3 mm and hot rolled 3 to 120 mm sheet and plate in 304 316L 409 and 2205 duplex, up to 2500 mm wide…
Explore the range →
Stainless Steel Bar
Round square flat and hexagonal bar in 301 316 316L 317 410 and 904L, hot rolled or cold drawn, black peeled bright or…
Explore the range →
Stainless Steel Pipe Fittings
Butt weld elbows tees and reducers from DN10 to DN1200 in SCH 5S to SCH XXS, to ASTM A403 ASME B16.9 DIN and JIS, with…
Explore the range →
Special Alloy
Nickel and nickel copper alloys including Inconel 600 and 625, Monel 400 and K500, Hastelloy C-276 and G30, Nickel 200…
Explore the range →Grades Buyers Ask for Most Often
Twelve of the thirty five listed products, spanning duplex, super austenitic and nickel alloy work.
Inconel 625 Alloy N06625
Inconel 625 is a nickel chromium molybdenum alloy with a niobium addition that hardens the alloy together with aluminium, so it…
View specifications →
Hastelloy C-276 Alloy N10276
Hastelloy C-276 is a nickel molybdenum chromium alloy with tungsten, designated UNS N10276. High molybdenum and chromium let it…
View specifications →
904L Stainless Steel Plate
904L stainless steel plate is a highly alloyed austenitic grade with very low carbon, high chromium, sufficient nickel and an…
View specifications →
Stainless Steel Flange DN15 to DN1200
A stainless steel flange is the disc shaped part that joins two lengths of pipe, with a gasket between the faces and bolts pulling…
View specifications →
2205 Duplex Stainless Steel Sheet
2205 duplex stainless steel, UNS S32205 and S31803, is a 22 percent chromium, 3 percent molybdenum, 5 to 6 percent nickel and…
View specifications →
Stainless Steel Elbow 45 90 and 180 Degree
A stainless steel elbow changes direction in a piping system. The standard set is 45, 90 and 180 degree in long radius, plus 90 and…
View specifications →
310S Stainless Steel Pipe
310S, also known as 1.4845 or X8CrNi25-21 under EN and UNS S31008, is the grade used in very high temperature environments.…
View specifications →
316L Stainless Steel Sheet
Grade 316 is the standard molybdenum bearing austenitic stainless steel, second only to 304 in importance. The molybdenum gives it…
View specifications →
Monel Alloy K500
Monel Alloy K500 is a nickel copper superalloy with high strength and strong corrosion resistance in marine environments. It is…
View specifications →
321 Stainless Steel Pipe
321 is the titanium stabilised austenitic grade preferred for heat resistant applications, written as 1.4541 or X6CrNiTi18-10 under…
View specifications →
Stainless Steel Equal and Reducing Tee
A stainless steel tee is a T shaped fitting with three branches, used to divide or combine pipelines, adjust flow rate and change…
View specifications →
409 Stainless Steel Plate and Sheet
Grade 409 is a thermostable ferritic stainless steel with better oxidation and corrosion resistance than carbon steel. This…
View specifications →Seven Sectors With Seven Different Failure Modes
Oil Gas and Petrochemical
Petrochemical service mixes acid, alkali and salt in one plant, and the line that is fine on Monday can be thinning...
Chemical Processing
Chemical plants are where material selection stops being a cost decision. Sulphuric, phosphoric, acetic, nitric and...
Power Generation and Nuclear
Power and nuclear work is dominated by two failure modes: oxidation at temperature and chloride stress corrosion...
Marine and Shipbuilding
Seawater is a stagnant chloride solution with biology in it, and that combination takes apart alloys that pass every...
Food and Pharmaceutical
Hygienic equipment is judged on what it does not do: it does not shed metal into the product, it does not hold...
Water and Fire Protection
Water systems are long life assets where the pipe is buried, embedded or hidden in a riser, so replacement cost far...
Automotive and Transport
Exhaust systems are a cost and durability problem at once. The material has to survive condensate, road salt and...
A Works Built in 1992 and Still Rolling
From Grade Selection to the Container at Shanghai
Four routes through the same works, depending on whether your problem is metallurgical, dimensional, documentary or logistical.
Alloy Grade Selection
Most alloy failures start as a specification decision made without the full service condition. This is the sequence we...
Made to Size Mill Supply
Buying standard mill lengths and cutting them on site wastes material twice, in the offcut and in the extra welds. This...
Inspection and Certification
Material that cannot be documented cannot be installed. The works holds pressure equipment and classification...
Export Packing and Logistics
Alloy that arrives scratched, iron contaminated or short shipped costs more than it saved. This is how orders are...
The Works the Approvals and the Quality Route
The works in Fengdong New Town, Xi'an, established in 1992 and covering more than 25000 square metres.
Melting and casting feed an annual output of around 40000 tons across pipe, plate, bar and fittings.
Forged rings and blanks, the starting point for flanges and heavy machined components.
Heavy forgings are machined in house before flange facing and drilling.
Guides Written for the People Who Specify the Material
316 or 316L Which One Belongs in a Welded Fabrication
316 is the second most used alloy in the 300 series. 316L is its low carbon version, created to stop the weld zone…
Read the guide →
Duplex and Super Duplex What the PREN Number Tells You
Duplex grades carry a mixed austenite and ferrite microstructure in roughly equal proportion. Super duplex is a…
Read the guide →
Hastelloy and Monel How to Tell Which One Your Process Needs
Both are nickel alloys and both are expensive, but they are built for different chemistry. Monel is a nickel copper…
Read the guide →Frequently Asked Questions
What grades do you supply
What is your minimum order quantity
How long does delivery take
Which certificates do you provide
Which countries do you export to
How do I get a quotation
Send the Grade the Size and the Quantity
Most enquiries can be quoted from one message. Add the destination port and the certificate level and the quotation comes back complete.