Stainless Steel Pipe Fittings
Butt weld elbows tees and reducers from DN10 to DN1200 in SCH 5S to SCH XXS, to ASTM A403 ASME B16.9 DIN and JIS, with ISO 9001 API Q1 and 3.1 certificates.
Every Product in This Category
A spool is only finished when the last fitting arrives. This category carries the full butt weld set in the same grades as the pipe: 45, 90 and 180 degree elbows in long and short radius plus 3D and 5D, equal and reducing tees, and concentric and eccentric reducers, in austenitic, duplex, super duplex and super austenitic grades.
Stainless Steel Concentric and Eccentric Reducer
A stainless steel reducer changes pipe diameter in one direction. The concentric type is normally used in vertical lines and the…
View specifications →
Stainless Steel Elbow 45 90 and 180 Degree
A stainless steel elbow changes direction in a piping system. The standard set is 45, 90 and 180 degree in long radius, plus 90 and…
View specifications →
Stainless Steel Equal and Reducing Tee
A stainless steel tee is a T shaped fitting with three branches, used to divide or combine pipelines, adjust flow rate and change…
View specifications →Problems This Category Solves
- One missing fitting holding up a finished spool
- Bolt circle and centre to face mismatches when fittings come from different standards
- Erosion at short radius bends on slurry and abrasive service
- Certificate gaps when a project requires EN 10204 3.1 documentation
Who Buys It
- Pipe spool fabricators buying fittings by the set
- Piping designers working to ASME B16.9 or B16.25
- Plant maintenance teams replacing corroded joints
- Distributors stocking butt weld fittings
What the Works Can Actually Produce
- Size range DN10 to DN1200 across elbows tees and reducers
- Seamless to NPS 24 inch and welded above that
- Fourteen grades from 304 to super duplex S32760
- ISO 9001, API or API Q1 and EN 10204 3.1 certificates
- 7 days from stock and 15 days for non stock material
Typical Applications
- Header and manifold branch connections
- Pump suction transitions needing an eccentric reducer
- Pipe rack runs holding a constant bottom of pipe elevation
- Duplex and super duplex spools in chloride service
Where This Material Ends Up
Oil Gas and Petrochemical
Petrochemical service mixes acid, alkali and salt in one plant, and the line that is fine on Monday can be...
Chemical Processing
Chemical plants are where material selection stops being a cost decision. Sulphuric, phosphoric, acetic,...
Power Generation and Nuclear
Power and nuclear work is dominated by two failure modes: oxidation at temperature and chloride stress...
Marine and Shipbuilding
Seawater is a stagnant chloride solution with biology in it, and that combination takes apart alloys that...
Stainless Steel Pipe Fittings Questions Buyers Ask
What is the difference between a long radius and a short radius elbow
Up to what size are fittings seamless
How fast can fittings ship
Which certificates do you issue
When should I use an eccentric reducer
How are fittings packed for export
Get a Quotation for Stainless Steel Pipe Fittings
Send the grade, the size, the wall or thickness, the quantity and the destination port. A quotation with lead time and certificate level comes back the same working day where possible.