LED Street Light 100W to 200W
Roadway luminaire in three wattage steps with an IP65 sealed housing
View Specifications →
Everything in the range built to stay outside: IP65 and IP66 street and flood lights, IP67 wall washers and neon flex, IP67 5050 strip and the AC and DOB modules used in outdoor fittings. Sealing, not brightness, is what decides whether an exterior installation survives.
Sealed products for permanent exterior installation
Roadway luminaire in three wattage steps with an IP65 sealed housing
View Specifications →Four wattage steps up to 300W with an IP65 or IP66 sealed outdoor body
View Specifications →Single COB source at 400W in an IP66 housing for high mast and facade throw
View Specifications →400W area flood with IP65 sealing and the full colour temperature range available
View Specifications →5050 package strip across white, RGB, RGBW and RGBWW with IP20 or IP67
View Specifications →Lensed wall wash strip in a glued TPU half tube, 12W per metre in white, RGB and SPI
View Specifications →IP67 wall washer built around a high efficiency 2835 lens solution, up to 3000 lm/m
View Specifications →IP67 wall washer across white, dual colour, RGB, SPI and DMX512 with five beam angles
View Specifications →Pixel controlled media ribbon at 10 pixels per metre in DMX and SPI, IP67
View Specifications →The slim neon body at 6 x 14 mm and 8 x 16 mm, up to 140 LEDs per metre
View Specifications →Side bend pixel ribbon in 15 x 15, 12 x 12 and 10 x 20 mm with SPI or DMX control
View Specifications →40 x 36 mm driver on board module with a 10 mm emitter for spots and pendants
View Specifications →54 x 72 mm driver on board module at 40W to 60W with a 20 mm emitter
View Specifications →3D bending neon body with a wall wash lens reaching a 3 to 5 metre washing height
View Specifications →The industry pages set out the constraints these products are specified against.
A facade installation is permanent, exposed and seen from a distance.
Read More →Most projects draw on more than one category.
Lighting engines specified for refrigerated display cases and cold rooms
7 products →IP65 for normal exposure, IP66 for pressure washing and coastal positions, IP67 for strips and neon flex that may sit in water.
Yes, unless every cut is sealed with a proper end cap.
The 400W flood lights, and street lights to 300W as a standard step.
Part number tables, efficacy, CRI, CCT, dimensions and IP ratings for every product in this category.