LED Module
Neon Strip Slim Digital Neon Flex Strip Light
The slim neon body at 6 x 14 mm and 8 x 16 mm, up to 140 LEDs per metre
View Specifications →
Industry Application
LED Lighting For Automotive Ambient Lighting
Ambient lines inside a vehicle interior have to be thin, follow compound curves and show no visible dots at arm's length. That rules out most standard strip product before the conversation starts.
Pain Points In This Industry
- Standard strip too thick to sit in an interior trim channel
- Compound curves that a single axis bending body cannot follow
- Visible LED points at very close viewing distance
- Fixed cut units wasting material on short trim runs
What The Application Needs
- Slim neon bodies at 6 x 14 mm and 8 x 16 mm
- 3D bending and free cutting for compound curves and short runs
- COB strips with a continuous emitting line
- Colour and addressable options for dynamic interior effects
Recommended Products
Products Specified For Automotive Ambient Lighting
Each of these is used in this application for a specific reason, not because it appears in the catalogue.
Cooler LED Module
Neon Strip 3D Bending And Free Cutting
Neon flex that bends in any direction and cuts at any length
View Specifications →
LED Module
COB Strip Dual Color
Continuous COB phosphor line carrying two colour channels for tunable white
View Specifications →
LED Module
COB Strip SPI Chasing Strip Light
Addressable SPI control on a continuous COB line for chasing effects without visible dots
View Specifications →Typical Scenarios
Where These Products Are Installed
Application Scenarios
- Dashboard and door trim lines
- Footwell and console detail
- Aftermarket interior atmosphere kits
- Display and show vehicles
What We Deliver
- Slim neon sections for tight trim channels
- Free cutting so short trim runs do not waste material
- SPI addressable builds for sequenced interior effects
- Body dimension and cut unit confirmed against the trim detail
Categories
Product Categories Used In This Industry
Architectural LED Strip
IP67 wall washers neon flex and pixel ribbon for building facades
8 products →
Knowledge
Guides For This Application
Design Guide
Top Bend Side Bend And 3D Bend Neon Flex Explained
Which way a neon flex body bends is the first thing to establish, because it decides whether the detail on the drawing can be built as drawn.
Read The Guide →
Comparison Article
DMX512 vs SPI Control For LED Strips
Both protocols drive addressable LED product, but they behave very differently over distance and in mixed installations. Choosing the wrong one is expensive to correct on site.
Read The Guide →Other Industries
Applications We Also Supply
Refrigeration And Cold Display
Lighting for refrigerated cases has to work at low temperature, survive condensation and wash-down, render fresh food honestly and add as little heat as possible to the plant.
Read More →
Supermarket And Retail Display
Retail lighting is seen close up and judged on the merchandise, not on the fixture.
Read More →
Architectural Facade Lighting
A facade installation is permanent, exposed and seen from a distance.
Read More →
Residential Cabinet And Wardrobe
Cabinet and wardrobe lighting is a detail, and details are looked at closely.
Read More →
Commercial And Office Lighting
People sit under office lighting for eight hours, and increasingly there is a camera in the room.
Read More →FAQ
Automotive Ambient Lighting FAQ
What is the slimmest neon body available?
6 x 14 mm, with 8 x 16 mm as the next size up.
Can it follow a compound curve?
Yes, the 3D bending body bends in any direction and cuts at any length.
How do I avoid visible dots at close range?
Use a COB strip, which has a continuous phosphor line rather than discrete emitters.
Send Us The Application Not Just The Part Number
Describe the case, the profile, the environment and the light level you need. We will come back with a specification rather than a price list.