LED Module
Wall Washer Strip Light High Efficiency Lens Series
IP67 wall washer built around a high efficiency 2835 lens solution, up to 3000 lm/m
View Specifications →
Industry Application
LED Lighting For Architectural Facade Lighting
A facade installation is permanent, exposed and seen from a distance. It is judged on beam control, on how it survives weather, and on how the fixture looks during the day when it is switched off.
Pain Points In This Industry
- Washes that look weak because the fixture cannot beat city ambient light
- Water ingress ending an exterior run in its first winter
- Curved details broken into straight sections because the product will not bend
- Static and pixel controlled sections that do not match when unlit
- Cut points and end caps quietly destroying the IP rating
What The Application Needs
- High output per metre with real beam control, not just brightness
- IP67 sealing with a cut and cap method that holds
- Bodies that bend in the direction the building actually curves
- One physical platform across white, RGB, SPI and DMX sections
Recommended Products
Products Specified For Architectural Facade Lighting
Each of these is used in this application for a specific reason, not because it appears in the catalogue.
LED Module
Wall Washer Strip Light Multi Angle Lens Series
IP67 wall washer across white, dual colour, RGB, SPI and DMX512 with five beam angles
View Specifications →
LED Module
Wall Washer Neon Strip 3D Bending
3D bending neon body with a wall wash lens reaching a 3 to 5 metre washing height
View Specifications →
LED Module
Neon Strip DMX SPI Media Ribbon IP67 1516
Pixel controlled media ribbon at 10 pixels per metre in DMX and SPI, IP67
View Specifications →
LED Module
Neon Strip DMX SPI Media Ribbon IP67 1020
Side bend pixel ribbon in 15 x 15, 12 x 12 and 10 x 20 mm with SPI or DMX control
View Specifications →
LED Module
LED Strip Light 5050
5050 package strip across white, RGB, RGBW and RGBWW with IP20 or IP67
View Specifications →Typical Scenarios
Where These Products Are Installed
Application Scenarios
- Building facade wash
- Media and dynamic facades
- Bridges and structures
- Landscape and hardscape walls
What We Deliver
- Beam angle selected from the mounting offset and the target wash height
- IP67 encapsulation with sealed cut points and end caps
- 3D bending and free cutting bodies for curved details
- DMX-AB and SPI builds matched to the specified control system
Categories
Product Categories Used In This Industry
Architectural LED Strip
IP67 wall washers neon flex and pixel ribbon for building facades
8 products →
Knowledge
Guides For This Application
Installation Guide
Wall Washer Beam Angles And Mounting Distance
A wall washer is only as good as the relationship between its beam angle, its offset from the wall and the height it has to cover. Get that wrong and no amount of output fixes it.
Read The Guide →
Comparison Article
DMX512 vs SPI Control For LED Strips
Both protocols drive addressable LED product, but they behave very differently over distance and in mixed installations. Choosing the wrong one is expensive to correct on site.
Read The Guide →
Design Guide
Top Bend Side Bend And 3D Bend Neon Flex Explained
Which way a neon flex body bends is the first thing to establish, because it decides whether the detail on the drawing can be built as drawn.
Read The Guide →Other Industries
Applications We Also Supply
Refrigeration And Cold Display
Lighting for refrigerated cases has to work at low temperature, survive condensation and wash-down, render fresh food honestly and add as little heat as possible to the plant.
Read More →
Supermarket And Retail Display
Retail lighting is seen close up and judged on the merchandise, not on the fixture.
Read More →
Residential Cabinet And Wardrobe
Cabinet and wardrobe lighting is a detail, and details are looked at closely.
Read More →
Commercial And Office Lighting
People sit under office lighting for eight hours, and increasingly there is a camera in the room.
Read More →
Automotive Ambient Lighting
Ambient lines inside a vehicle interior have to be thin, follow compound curves and show no visible dots at arm's length.
Read More →FAQ
Architectural Facade Lighting FAQ
How high can one line of wall washer reach?
The 3D bending wall washer neon flex washes over 3 to 5 metres.
What pixel resolution is available for media content?
10 pixels per metre on the DMX and SPI media ribbon.
Can a lensed wall washer follow a curve?
Yes. The 3D bending wall washer neon flex combines a wall wash lens with a body that bends in any direction.
Send Us The Application Not Just The Part Number
Describe the case, the profile, the environment and the light level you need. We will come back with a specification rather than a price list.