LED Module
LED Strip Light 2110 300LED
300 LEDs per metre on the 2110 package for accent brightness with no visible dots
View Specifications →
Industry Application
LED Lighting For Residential Cabinet And Wardrobe
Cabinet and wardrobe lighting is a detail, and details are looked at closely. The strip is often visible, the profile is shallow, and the client will notice a row of dots or a colour that does not match the next run.
Pain Points In This Industry
- Visible dotting in shallow or open profiles
- Strips too bright for an accent detail and permanently dimmed to compensate
- Colour mismatch between separate runs installed at different times
- Magnetic or removable mounting needed in rented or finished joinery
What The Application Needs
- Low density seamless strip for accent detail
- High CRI so timber, fabric and finishes read correctly
- Removable mounting options for joinery that cannot be drilled
- Warm colour temperatures and tunable white options
Recommended Products
Products Specified For Residential Cabinet And Wardrobe
Each of these is used in this application for a specific reason, not because it appears in the catalogue.
LED Module
COB Strip Dual Color
Continuous COB phosphor line carrying two colour channels for tunable white
View Specifications →
LED Module
Magnetic Light Energy Saving Solution
Magnet mounted 24V bar that installs without drilling and comes off for cleaning
View Specifications →
LED Module
DC Module Linear High Efficiency Series
Seven board sizes from 70 x 24 mm to 560 x 40 mm holding 160 lm/W and above
View Specifications →
Cooler LED Module
Strip Light 2835 Energy Saving Solution
24V 5 m reels from 300 to 800 LEDs, CRI above 90, IP20 or IP67
View Specifications →Typical Scenarios
Where These Products Are Installed
Application Scenarios
- Wardrobe and closet rails
- Kitchen under cabinet lighting
- Display and bookshelf lighting
- Bathroom and mirror detail
What We Deliver
- Strip density chosen for accent rather than task brightness
- CRI above 90 across the strip range
- Magnetic mounting where joinery cannot be drilled
- Cut lengths and connectors matched to the cabinet module
Categories
Product Categories Used In This Industry
Knowledge
Guides For This Application
Product Guide
LED Strip Density And Cut Length Explained
LED density decides how the strip looks; cut length decides how much of it you waste. Both are set by the package, and both are worth checking before the profile is ordered.
Read The Guide →
Product Guide
Understanding IP20 IP65 And IP67 For LED Strips
The IP number on a strip datasheet describes the strip as it leaves the factory, not as it will be after it has been cut, joined and installed. This guide explains what each rating means in practice.
Read The Guide →Other Industries
Applications We Also Supply
Refrigeration And Cold Display
Lighting for refrigerated cases has to work at low temperature, survive condensation and wash-down, render fresh food honestly and add as little heat as possible to the plant.
Read More →
Supermarket And Retail Display
Retail lighting is seen close up and judged on the merchandise, not on the fixture.
Read More →
Architectural Facade Lighting
A facade installation is permanent, exposed and seen from a distance.
Read More →
Commercial And Office Lighting
People sit under office lighting for eight hours, and increasingly there is a camera in the room.
Read More →
Automotive Ambient Lighting
Ambient lines inside a vehicle interior have to be thin, follow compound curves and show no visible dots at arm's length.
Read More →FAQ
Residential Cabinet And Wardrobe FAQ
Which strip suits a shallow cabinet profile?
The 2110 at 300 LEDs per metre, which is seamless without needing a deep diffuser.
Can lighting be fitted without drilling the joinery?
Yes, the magnetic light mounts on magnets to a ferrous surface and lifts off again.
What brightness is right for cabinet accent lighting?
Around 1100 lumens per metre, which is what the 2110 300 LED build delivers.
Send Us The Application Not Just The Part Number
Describe the case, the profile, the environment and the light level you need. We will come back with a specification rather than a price list.