LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
10 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT3 Multipair Cable

10 Pair

Unshielded CAT3 Telephone UTP Multipairs Cable 10 pair 1000ft solid bare copper

This is the 10 pair UTP CAT3 solid bare copper specification in the LANP CAT3 Multipair Cable range. The factory specification for this line reads: Unshielded CAT3 Telephone UTP Multipairs Cable 10 pair 1000ft solid bare copper.

It is packed as 1000 ft. It is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

CategoryCAT3 Multipair Cable
ShieldingUTP
Conductorbare copper
Pairs10 pair
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

Copper all the way through on 10 Pair. Resistance per metre is measured on every batch rather than assumed from the conductor diameter.

Unshielded Build

The UTP construction of 10 Pair keeps containment fill and termination time down. Screening only pays where you can name the interference source.

10 Pair Build

10 Pair is a 10 pair build. Core count is fixed the moment the cable is in the wall, so it is worth ordering spare capacity rather than a second pull later.

Packed As You Handle It

1000 ft is the stocked format for 10 Pair; tell us how it will be handled and we will match the packing to it.

OEM Branding Available

Your brand can be extruded onto the 10 Pair jacket from 1 km per specification, alongside the rating and length markers, with box artwork and reel labels to match.

Tested Before It Ships

10 Pair does not leave the floor untested. Resistance, continuity and dielectric checks run on each production lot, and the records stay with the batch.

Technical Data

Specification Sheet

Values below are the factory specification for 10 Pair. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product Name10 Pair
CategoryCAT3 Multipair Cable
Cable ClassCAT3
ShieldingUTP — unshielded twisted pair
Conductor Materialbare copper
Conductor StructureSolid
Pairs10 pair
Packaging1000 ft
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT3 specification
  • UTP — unshielded twisted pair
  • Solid conductor
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper

Who It Is For

  • Telecom contractors maintaining copper distribution
  • Building services contractors wiring voice risers
  • Door entry and intercom installers in apartment blocks
  • Distributors serving the telecoms trade

Problems It Solves

  • Large pair counts unavailable in small order quantities
  • Outdoor duct runs where a PVC jacket will not survive
  • Pair identification that varies between suppliers
  • Drum weight and handling on a high pair-count run

Application Scenarios

  • Voice riser and horizontal distribution
  • MDF and cross-connect work
  • Outdoor duct and aerial distribution
  • Door entry and intercom backbones
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design
Use Guide

Installing It Without Losing Performance

  • Pull 10 Pair at a steady, low tension. Pair geometry stretched during installation cannot be recovered, and it shows up as a return loss failure at certification.
  • Terminate 10 Pair with the twist maintained as close to the contact as possible. This single habit accounts for most first-time certification passes.
  • Respect the bend radius on 10 Pair, especially in the last stretch into the patch panel where a full bundle is being dressed into a tight space.
  • Document which pairs of 10 Pair are used at each end. Multi-pair cable without a record is archaeology for the next engineer.
  • A short service loop on 10 Pair at each end is the cheapest insurance against future re-work.

Before a first bulk order of 10 Pair: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT3 Multipair Cable Range

See all 12 cat3 multipair cable products →

CAT3 Multipair Cable10 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

10 Pair Outdoor

Category 3 UTP Installation Cable 10 Pair Cat3 Telephone Cable 1000ft Spool Outdoor PE…

UTP10 pair
View specification →
CAT3 Multipair Cable100 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

100 Pair

CAT3 CAT5e 100 Pair UTP 0.50mm PVC Indoor HYA Telecom Cable fast speed

UTP100 pair
View specification →
CAT3 Multipair Cable100 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

100 Pair Outdoor

Outdoor Direct Burial Underground 100Pair Cat3 Telecom Cable for voice data networking

100 pair
View specification →
CAT3 Multipair Cable2 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

2 Pair

UTP Cat3 Voice Bulk Intercom Telephone Cable Indoor 2 pair

UTP2 pair
View specification →

Related guides

Questions

10 Pair — Questions

Is the conductor in 10 Pair really bare copper?

Yes. 10 Pair is a bare copper line, confirmed by resistance measurement on each production lot rather than by the extruder setting.

How is 10 Pair packed?

10 Pair ships as 1000 ft as standard. Other formats are produced to order once we know how the cable will be handled on site.

Can you print our brand on 10 Pair?

Yes, from 1 km per specification. Below that 10 Pair ships with neutral print and your branding goes on the box and reel label.

What is the minimum order and lead time for 10 Pair?

10 Pair starts at 100 m for a sample reel and runs to 50,000 m per production order. Bulk production is typically 3-7 days from PO confirmation.

Request pricing on 10 Pair

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue