LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
2 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT3 Multipair Cable

2 Pair

UTP Cat3 Voice Bulk Intercom Telephone Cable Indoor 2 pair

This is the 2 pair UTP CAT3 specification in the LANP CAT3 Multipair Cable range, specified for internal runs. The original specification reads: UTP Cat3 Voice Bulk Intercom Telephone Cable Indoor 2 pair.

It is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

CategoryCAT3 Multipair Cable
ShieldingUTP
Pairs2 pair
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Unshielded Build

No screen on 2 Pair. In an ordinary office or retail environment that is the correct choice: the twist does the work and the cable stays easy to dress.

2 Pair Build

2 pair on 2 Pair. Adding cores at order time is close to free; re-pulling a riser is a day.

OEM Branding Available

2 Pair can ship as a private label line: logo printed on the jacket from 1 km, plus custom box artwork, reel labels and bag printing.

Tested Before It Ships

Testing on 2 Pair happens at the factory, not at your warehouse: continuity end to end, conductor resistance, and dielectric strength on the finished cable.

Technical Data

Specification Sheet

Values below are the factory specification for 2 Pair. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product Name2 Pair
CategoryCAT3 Multipair Cable
Cable ClassCAT3
ShieldingUTP — unshielded twisted pair
Pairs2 pair
InstallationIndoor
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT3 specification
  • UTP — unshielded twisted pair
  • Jacket printed with specification and rating as standard

Materials

  • Conductor and jacket materials confirmed per order against the line specification

Who It Is For

  • Telecom contractors maintaining copper distribution
  • Building services contractors wiring voice risers
  • Door entry and intercom installers in apartment blocks
  • Distributors serving the telecoms trade

Problems It Solves

  • Large pair counts unavailable in small order quantities
  • Outdoor duct runs where a PVC jacket will not survive
  • Pair identification that varies between suppliers
  • Drum weight and handling on a high pair-count run

Application Scenarios

  • Voice riser and horizontal distribution
  • MDF and cross-connect work
  • Outdoor duct and aerial distribution
  • Door entry and intercom backbones
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
10 Pair OutdoorThis is the indoor specification; that one is built for outdoor use. The difference is the jacket, and substituting one for the other is the usual cause of a premature failure.
Use Guide

Installing It Without Losing Performance

  • Pull 2 Pair at a steady, low tension. Pair geometry stretched during installation cannot be recovered, and it shows up as a return loss failure at certification.
  • Every millimetre of untwisted conductor at a 2 Pair termination is unprotected cable. Strip back only as far as the contact block actually needs.
  • Keep 2 Pair off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.
  • Follow the pair colour code on 2 Pair end to end and record the pair allocation at both termination points before closing the cabinet.
  • Leave a service loop at each 2 Pair termination so the cable can be re-worked without a splice.

Before a first bulk order of 2 Pair: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT3 Multipair Cable Range

See all 12 cat3 multipair cable products →

CAT3 Multipair Cable10 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

10 Pair

Unshielded CAT3 Telephone UTP Multipairs Cable 10 pair 1000ft solid bare copper

UTP10 pair
View specification →
CAT3 Multipair Cable10 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

10 Pair Outdoor

Category 3 UTP Installation Cable 10 Pair Cat3 Telephone Cable 1000ft Spool Outdoor PE…

UTP10 pair
View specification →
CAT3 Multipair Cable100 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

100 Pair

CAT3 CAT5e 100 Pair UTP 0.50mm PVC Indoor HYA Telecom Cable fast speed

UTP100 pair
View specification →
CAT3 Multipair Cable100 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

100 Pair Outdoor

Outdoor Direct Burial Underground 100Pair Cat3 Telecom Cable for voice data networking

100 pair
View specification →

Related guides

Questions

2 Pair — Questions

What packing formats are available for 2 Pair?

Packing for 2 Pair is decided with the order — reels, coils or cartons, in whatever unit length suits the installers.

Can you print our brand on 2 Pair?

Yes, from 1 km per specification. Below that 2 Pair ships with neutral print and your branding goes on the box and reel label.

What is the minimum order and lead time for 2 Pair?

2 Pair starts at 100 m for a sample reel and runs to 50,000 m per production order. Bulk production is typically 3-7 days from PO confirmation.

Request pricing on 2 Pair

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue