LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
100 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT3 Multipair Cable

100 Pair Outdoor

Outdoor Direct Burial Underground 100Pair Cat3 Telecom Cable for voice data networking

100 Pair Outdoor sits in the LANP CAT3 Multipair Cable range as a 100 pair CAT3 build, specified for external runs. The factory specification for this line reads: Outdoor Direct Burial Underground 100Pair Cat3 Telecom Cable for voice data networking.

Order quantities start at 100 m for evaluation and scale to 50,000 m per run, at a typical bulk lead time of 3-7 days.

CategoryCAT3 Multipair Cable
Pairs100 pair
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Built For External Routes

Outdoor construction on 100 Pair Outdoor means the jacket survives sustained sunlight. A PVC cable in the same position chalks, cracks and lets water into the core.

100 Pair Build

100 Pair Outdoor is a 100 pair build. Core count is fixed the moment the cable is in the wall, so it is worth ordering spare capacity rather than a second pull later.

OEM Branding Available

100 Pair Outdoor can ship as a private label line: logo printed on the jacket from 1 km, plus custom box artwork, reel labels and bag printing.

Tested Before It Ships

Each production lot of 100 Pair Outdoor is measured before packing. That is how the second order matches the sample you approved on the first.

Technical Data

Specification Sheet

Values below are the factory specification for 100 Pair Outdoor. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product Name100 Pair Outdoor
CategoryCAT3 Multipair Cable
Cable ClassCAT3
Pairs100 pair
InstallationOutdoor
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT3 specification
  • Jacket printed with specification and rating as standard

Materials

  • Conductor and jacket materials confirmed per order against the line specification

Who It Is For

  • Telecom contractors maintaining copper distribution
  • Building services contractors wiring voice risers
  • Door entry and intercom installers in apartment blocks
  • Distributors serving the telecoms trade

Problems It Solves

  • Large pair counts unavailable in small order quantities
  • Outdoor duct runs where a PVC jacket will not survive
  • Pair identification that varies between suppliers
  • Drum weight and handling on a high pair-count run

Application Scenarios

  • Voice riser and horizontal distribution
  • MDF and cross-connect work
  • Outdoor duct and aerial distribution
  • Door entry and intercom backbones
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
100 PairThis is the outdoor specification; that one is built for indoor use. The difference is the jacket, and substituting one for the other is the usual cause of a premature failure.
Use Guide

Installing It Without Losing Performance

  • Use a pulling grip on 100 Pair Outdoor rather than hand tension, and pull steadily. Jerked pulls are what turn a good drum into a failed link.
  • Every millimetre of untwisted conductor at a 100 Pair Outdoor termination is unprotected cable. Strip back only as far as the contact block actually needs.
  • Keep 100 Pair Outdoor off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.
  • Document which pairs of 100 Pair Outdoor are used at each end. Multi-pair cable without a record is archaeology for the next engineer.
  • Coil a little spare 100 Pair Outdoor at every termination — re-terminating a cable pulled tight means cutting into the run.

Before a first bulk order of 100 Pair Outdoor: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT3 Multipair Cable Range

See all 12 cat3 multipair cable products →

CAT3 Multipair Cable10 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

10 Pair

Unshielded CAT3 Telephone UTP Multipairs Cable 10 pair 1000ft solid bare copper

UTP10 pair
View specification →
CAT3 Multipair Cable10 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

10 Pair Outdoor

Category 3 UTP Installation Cable 10 Pair Cat3 Telephone Cable 1000ft Spool Outdoor PE…

UTP10 pair
View specification →
CAT3 Multipair Cable100 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

100 Pair

CAT3 CAT5e 100 Pair UTP 0.50mm PVC Indoor HYA Telecom Cable fast speed

UTP100 pair
View specification →
CAT3 Multipair Cable2 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

2 Pair

UTP Cat3 Voice Bulk Intercom Telephone Cable Indoor 2 pair

UTP2 pair
View specification →

Related guides

Questions

100 Pair Outdoor — Questions

What packing formats are available for 100 Pair Outdoor?

Reel, coil and carton formats are all set per order for 100 Pair Outdoor. Tell us how it will be handled on site and we will match the packing to that.

Can you print our brand on 100 Pair Outdoor?

From 1 km we extrude your brand onto the 100 Pair Outdoor jacket itself. Under that minimum the branding goes on packaging instead.

What is the minimum order and lead time for 100 Pair Outdoor?

A trial reel of 100 m is enough to evaluate 100 Pair Outdoor. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Request pricing on 100 Pair Outdoor

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue