LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
100 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT3 Multipair Cable

100 Pair

CAT3 CAT5e 100 Pair UTP 0.50mm PVC Indoor HYA Telecom Cable fast speed

100 Pair sits in the LANP CAT3 Multipair Cable range as a 100 pair UTP CAT5e build, specified for internal runs. As catalogued by the factory: CAT3 CAT5e 100 Pair UTP 0.50mm PVC Indoor HYA Telecom Cable fast speed.

It is supplied with a PVC jacket. MOQ runs from 100 m for a trial reel up to production runs of 50,000 m, with bulk production typically 3-7 days from PO confirmation.

CategoryCAT3 Multipair Cable
ShieldingUTP
JacketPVC
Pairs100 pair
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Unshielded Build

100 Pair is an unshielded build, which means a smaller outside diameter and faster termination than a screened equivalent — the right trade in a conventional building.

100 Pair Build

100 pair on 100 Pair. Adding cores at order time is close to free; re-pulling a riser is a day.

OEM Branding Available

From 1 km we print your brand on 100 Pair rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

100 Pair does not leave the floor untested. Resistance, continuity and dielectric checks run on each production lot, and the records stay with the batch.

Technical Data

Specification Sheet

Values below are the factory specification for 100 Pair. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product Name100 Pair
CategoryCAT3 Multipair Cable
Cable ClassCAT5e
Type CodeHYA
ShieldingUTP — unshielded twisted pair
Conductor Diameter0.50 mm
Pairs100 pair
Jacket MaterialPVC
InstallationIndoor
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT5e specification
  • UTP — unshielded twisted pair
  • HYA type code
  • Jacket printed with specification and rating as standard

Materials

  • Jacket: PVC

Who It Is For

  • Telecom contractors maintaining copper distribution
  • Building services contractors wiring voice risers
  • Door entry and intercom installers in apartment blocks
  • Distributors serving the telecoms trade

Problems It Solves

  • Large pair counts unavailable in small order quantities
  • Outdoor duct runs where a PVC jacket will not survive
  • Pair identification that varies between suppliers
  • Drum weight and handling on a high pair-count run

Application Scenarios

  • Voice riser and horizontal distribution
  • MDF and cross-connect work
  • Outdoor duct and aerial distribution
  • Door entry and intercom backbones
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
10 Pair OutdoorThis is the indoor specification; that one is built for outdoor use. The difference is the jacket, and substituting one for the other is the usual cause of a premature failure.
100 Pair OutdoorThis is the indoor specification; that one is built for outdoor use. The difference is the jacket, and substituting one for the other is the usual cause of a premature failure.
Use Guide

Installing It Without Losing Performance

  • Use a pulling grip on 100 Pair rather than hand tension, and pull steadily. Jerked pulls are what turn a good drum into a failed link.
  • Terminate 100 Pair with the twist maintained as close to the contact as possible. This single habit accounts for most first-time certification passes.
  • Keep 100 Pair off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.
  • Follow the pair colour code on 100 Pair end to end and record the pair allocation at both termination points before closing the cabinet.
  • A short service loop on 100 Pair at each end is the cheapest insurance against future re-work.

Before a first bulk order of 100 Pair: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT3 Multipair Cable Range

See all 12 cat3 multipair cable products →

CAT3 Multipair Cable10 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

10 Pair

Unshielded CAT3 Telephone UTP Multipairs Cable 10 pair 1000ft solid bare copper

UTP10 pair
View specification →
CAT3 Multipair Cable10 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

10 Pair Outdoor

Category 3 UTP Installation Cable 10 Pair Cat3 Telephone Cable 1000ft Spool Outdoor PE…

UTP10 pair
View specification →
CAT3 Multipair Cable100 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

100 Pair Outdoor

Outdoor Direct Burial Underground 100Pair Cat3 Telecom Cable for voice data networking

100 pair
View specification →
CAT3 Multipair Cable2 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

2 Pair

UTP Cat3 Voice Bulk Intercom Telephone Cable Indoor 2 pair

UTP2 pair
View specification →

Related guides

Questions

100 Pair — Questions

What packing formats are available for 100 Pair?

Reel, coil and carton formats are all set per order for 100 Pair. Tell us how it will be handled on site and we will match the packing to that.

Can you print our brand on 100 Pair?

Yes, from 1 km per specification. Below that 100 Pair ships with neutral print and your branding goes on the box and reel label.

What is the minimum order and lead time for 100 Pair?

A trial reel of 100 m is enough to evaluate 100 Pair. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Request pricing on 100 Pair

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue