LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
10 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT3 Multipair Cable

10 Pair Outdoor

Category 3 UTP Installation Cable 10 Pair Cat3 Telephone Cable 1000ft Spool Outdoor PE Jacket Balck

This is the 10 pair UTP CAT3 specification in the LANP CAT3 Multipair Cable range, specified for external runs. The original specification reads: Category 3 UTP Installation Cable 10 Pair Cat3 Telephone Cable 1000ft Spool Outdoor PE Jacket Balck.

It is supplied with a PE jacket, packed as 1000 ft, spool. Order quantities start at 100 m for evaluation and scale to 50,000 m per run, at a typical bulk lead time of 3-7 days.

CategoryCAT3 Multipair Cable
ShieldingUTP
JacketPE
Pairs10 pair
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Unshielded Build

No screen on 10 Pair Outdoor. In an ordinary office or retail environment that is the correct choice: the twist does the work and the cable stays easy to dress.

Built For External Routes

10 Pair Outdoor is the outdoor specification. Use it for duct, aerial and exposed runs where an indoor jacket would fail within a couple of seasons.

10 Pair Build

With 10 pair, 10 Pair Outdoor leaves room for the device that gets added after handover — which is the normal case, not the exception.

Packed As You Handle It

Standard packing for 10 Pair Outdoor is 1000 ft, spool. Custom reel and coil lengths run on production orders.

OEM Branding Available

OEM on 10 Pair Outdoor means print on the cable itself from 1 km — still readable when an electrician pulls the last ten metres off the drum.

Tested Before It Ships

Every 10 Pair Outdoor batch is checked for conductor resistance, continuity and dielectric strength before it reaches packing. A batch that fails a gate is held, not blended into a shipment.

Technical Data

Specification Sheet

Values below are the factory specification for 10 Pair Outdoor. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product Name10 Pair Outdoor
CategoryCAT3 Multipair Cable
Cable ClassCAT3
ShieldingUTP — unshielded twisted pair
Pairs10 pair
Jacket MaterialPE
InstallationOutdoor
Packaging1000 ft, spool
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT3 specification
  • UTP — unshielded twisted pair
  • Jacket printed with specification and rating as standard

Materials

  • Jacket: PE

Who It Is For

  • Telecom contractors maintaining copper distribution
  • Building services contractors wiring voice risers
  • Door entry and intercom installers in apartment blocks
  • Distributors serving the telecoms trade

Problems It Solves

  • Large pair counts unavailable in small order quantities
  • Outdoor duct runs where a PVC jacket will not survive
  • Pair identification that varies between suppliers
  • Drum weight and handling on a high pair-count run

Application Scenarios

  • Voice riser and horizontal distribution
  • MDF and cross-connect work
  • Outdoor duct and aerial distribution
  • Door entry and intercom backbones
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
100 PairThis is the outdoor specification; that one is built for indoor use. The difference is the jacket, and substituting one for the other is the usual cause of a premature failure.
Use Guide

Installing It Without Losing Performance

  • Pull 10 Pair Outdoor at a steady, low tension. Pair geometry stretched during installation cannot be recovered, and it shows up as a return loss failure at certification.
  • Terminate 10 Pair Outdoor with the twist maintained as close to the contact as possible. This single habit accounts for most first-time certification passes.
  • Keep 10 Pair Outdoor off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.
  • Document which pairs of 10 Pair Outdoor are used at each end. Multi-pair cable without a record is archaeology for the next engineer.
  • Leave a service loop at each 10 Pair Outdoor termination so the cable can be re-worked without a splice.

Before a first bulk order of 10 Pair Outdoor: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT3 Multipair Cable Range

See all 12 cat3 multipair cable products →

CAT3 Multipair Cable10 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

10 Pair

Unshielded CAT3 Telephone UTP Multipairs Cable 10 pair 1000ft solid bare copper

UTP10 pair
View specification →
CAT3 Multipair Cable100 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

100 Pair

CAT3 CAT5e 100 Pair UTP 0.50mm PVC Indoor HYA Telecom Cable fast speed

UTP100 pair
View specification →
CAT3 Multipair Cable100 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

100 Pair Outdoor

Outdoor Direct Burial Underground 100Pair Cat3 Telecom Cable for voice data networking

100 pair
View specification →
CAT3 Multipair Cable2 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

2 Pair

UTP Cat3 Voice Bulk Intercom Telephone Cable Indoor 2 pair

UTP2 pair
View specification →

Related guides

Questions

10 Pair Outdoor — Questions

How is 10 Pair Outdoor packed?

10 Pair Outdoor ships as 1000 ft, spool as standard. Other formats are produced to order once we know how the cable will be handled on site.

Can you print our brand on 10 Pair Outdoor?

Yes, from 1 km per specification. Below that 10 Pair Outdoor ships with neutral print and your branding goes on the box and reel label.

What is the minimum order and lead time for 10 Pair Outdoor?

A trial reel of 100 m is enough to evaluate 10 Pair Outdoor. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Request pricing on 10 Pair Outdoor

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue