LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
Cable reels staged for inspection in the LANP CABLE spooling room
Applications

Cable For Fire Detection And Alarm Systems

Circuits that have to be identifiable, stable and documented.

Ask An Engineer Browse All Products
The Situation

What Makes This Application Different

A fire system is inspected, certified and then maintained by people who were not there when it was installed. Everything about the cable has to make their job obvious rather than archaeological.

Specification Decisions

What To Decide Before The Cable Is Ordered

Identification

The red jacket is not decoration. It is how an inspector, an electrician and a future contractor tell a life safety circuit from general wiring.

Loop resistance

Solid copper conductor keeps loop resistance inside the panel's acceptance window across the length of a detection circuit.

Screening

Unshielded is normal for a clean containment route. Specify shielded where the loop runs parallel to power cable or through a plant room.

Core count

Allow spare cores. A zone that gets extended after handover is the normal case, not the exception.

Certification

Wstlab CE certification covering 2-core to 22-core fire alarm cable at AC60/750 V, 50/60 Hz, issued with the order.

Cable Families

Ranges Used In This Application

Fire Alarm Cable from the LANP range, manufactured in Jieyang, Guangdong.
6 specifications

Fire Alarm Cable

Detection and sounder circuits that are identifiable on sight.

Explore the range →
Security & Alarm Cable from the LANP range, manufactured in Jieyang, Guangdong.
12 specifications

Security & Alarm Cable

Signal cable with enough spare cores for the device that gets added later.

Explore the range →
Products

Specifications Commonly Selected

Fire Cable2 Core Shielded Red — Fire Cable manufactured by LANP CABLE

2 Core Shielded Red

red fire alarm cable 2x1.5mm fireproof copper wire lsoh lszh jacket

Shielded2 coreRed
View specification →
Fire Cable2 Core Unshielded Red — Fire Cable manufactured by LANP CABLE

2 Core Unshielded Red

2 Core Red Fire Alarm Security Access Cable Wire Sound and Alarm Cable Solid Wire Unshielded

UTP2 coreRed
View specification →
Fire Cable4 Core Shielded Red — Fire Cable manufactured by LANP CABLE

4 Core Shielded Red

Bare Copper 4 Core shielded fire performance cable apply for Fire Alarm System Low Voltage

Shielded4 coreRed
View specification →
Fire Cable4 Core Unshielded Red — Fire Cable manufactured by LANP CABLE

4 Core Unshielded Red

4 core solid fire alarm cable fire protection security signal control wire red copper for…

UTP4 coreRed
View specification →
Fire Cable6 Core Shielded Red — Fire Cable manufactured by LANP CABLE

6 Core Shielded Red

6 Core Fire Alarm Cable solid copper Conductor Overall Shielded Red PVC 1000ft for Fire…

Shielded6 coreRed
View specification →
Fire Cable6 Core Unshielded Red — Fire Cable manufactured by LANP CABLE

6 Core Unshielded Red

Solid Unshielded 6 Core Fire Alarm Cable Red Fire Security Burglar Station Wire 1000ft for…

UTP6 coreRed
View specification →

Related guides

Other applications

Questions

Fire Detection & Alarm Systems — Questions

What core counts are held for fire alarm cable?

2, 4 and 6 core, shielded and unshielded, on 305 m wooden reels.

Does the cable meet a specific fire resistance standard?

The range carries Wstlab CE certification as described above. If your project requires a specific circuit-integrity standard, send the standard reference with the enquiry so we can confirm before you specify.

Not sure which specification fits fire detection & alarm systems?

Send the run lengths, environment and device loading for your fire detection & alarm systems project. We will name the stocked specification that fits before you order rather than after.

Chat on WhatsApp Email UsKnowledge Center