Livestock Equipment Manufacturer · 10+ years · Ningbo, China [email protected] +86-157-5780-4025 Catalogue
Drinking Systems from JGM Industrial

Feeding & Drinking

Drinking Systems

Drinking bowls, cups and water-control valves that keep clean water flowing at the right pressure for every animal stage.

Almost every wet pen and every dripping drinker traced back on a farm turns out to be a pressure problem, not a drinker problem.

The range

4 Products In This System

Drinking Bowl — Drinking Systems by JGM Industrial

Drinking Bowl

Robust drinker bowl with a float valve, so water is there when the animal wants it and nowhere else.

Cast + stainlessFloat valve
Drinking Cup — Drinking Systems by JGM Industrial

Drinking Cup

Bite-action drinking cup that delivers water only while the animal is drinking, and stays clean between.

Engineering plasticBite valve
Piglet Drinking Cup — Drinking Systems by JGM Industrial

Piglet Drinking Cup

Low-flow piglet cup sized for creep and nursery pens, with a transparent bowl so intake can be seen.

PlasticLow flow
Water Control Valve — Drinking Systems by JGM Industrial

Water Control Valve

Diaphragm water control valve that holds the right pressure to bowls and nipple lines, all day and every day.

Diaphragm valveRegulated

What This System Is For

Start at the valve. A diaphragm water control valve holds a set outlet pressure regardless of what the mains is doing, which is what makes bite valves seal and float bowls refill consistently.

Downstream, match the drinker to the stage: a cast and stainless float bowl for sows and finishers, a bite-action cup for nursery and grow-finish pens, and a transparent low-flow piglet cup (code 22091, 124 × 60 mm) for creep areas where intake needs to be visible.

Who Buys It

  • Any house with more than one drinker line
  • Farms chasing wet pens and dripping drinkers
  • Producers monitoring water intake as a health indicator

One order, one packing list

Order this system on its own, or specify it alongside flooring, penning, feeding, water and climate as a single project crated by room.

Turnkey house equipment

Core advantages

Why This Range Is Specified

Regulated supply first

One valve per room or line removes the cause of most drinker faults.

A drinker for each stage

Float bowl, bite cup and low-flow piglet cup from one supplier.

Visible intake in the creep

A transparent piglet bowl shows from the alley whether the litter is drinking.

Serviceable parts

Diaphragms and valve assemblies are replaced in place, not thrown away with the unit.

Where it is used

Rooms and Animal Stages

Farrowing Rooms

Farrowing Rooms

The room where the margin is made or lost. Equipment for farrowing crates, creep areas and the sow's own comfort.

Gestation and Sow Housing

Gestation and Sow Housing

Group housing and dry sow accommodation, where the ration has to be exact and the equipment has to survive an animal that leans on it.

Grow-Finish Houses

Grow-Finish Houses

Where the weight is. Flooring, penning and feeders specified for animals that push, and for the feed conversion the house is judged on.

Nursery and Weaner Rooms

Nursery and Weaner Rooms

The stage where a pig either keeps growing or stalls. Flooring, penning, feed and water sized for the animal it is now, not the one it will be.

Related reading

Guides For This System

Answers

Drinking Systems FAQs

Why do my drinkers drip?

Almost always over-pressure or grit on the valve seat. Fit a regulator per line and set it to the drinker's figure.

Which drinker for a creep area?

The transparent low-flow piglet cup, code 22091, mounted at piglet shoulder height rather than at the sow's drinker height.

Can piglets and sows share a water line?

They can, but a separately regulated piglet line gives much better control of flow at the cup.

Which part of the control valve wears?

The diaphragm. It is replaceable in place, so keep one on the shelf.

Other systems

The Rest Of The House

Slatted Floors range from JGM Industrial4 products

Slatted Floors

Plastic and cast-iron slatted flooring for farrowing, nursery and finishing rooms — engineered for drainage, grip and a long life under washdown.

Flooring & Structure
PVC Wall Panel & Board range from JGM Industrial4 products

PVC Wall Panel & Board

Hollow PVC wall and partition boards — sealed, washable surfaces that replace block and render in modern animal housing.

Flooring & Structure
FRP Support Beams range from JGM Industrial4 products

FRP Support Beams

Fibreglass support and bearing beams that carry plastic and cast-iron slats across the pit and never corrode doing it.

Flooring & Structure
Pig PP Panel range from JGM Industrial3 products

Pig PP Panel

Polypropylene pen panels in green, black and white — solid and vented faces, smooth, impact-resistant and sized from 850 to 1200 mm.

Penning
Pen Partitions & Penning range from JGM Industrial6 products

Pen Partitions & Penning

Partition panels and penning components for farrowing crates, weaner pens and grow-finish rooms — built to keep groups apart and pens dry.

Penning
Feeding Systems range from JGM Industrial6 products

Feeding Systems

Pan feeders, dosing cups, drop hoppers and trumpet pipes for accurate, low-waste feeding from weaning to finishing.

Feeding & Drinking
Climate & Ventilation range from JGM Industrial3 products

Climate & Ventilation

Recirculation fans and impellers that even out temperature and air quality across farrowing and nursery rooms.

Climate & Parts
PVC Profiles & Connectors range from JGM Industrial5 products

PVC Profiles & Connectors

PVC connecting profiles that lock panels and posts into a sealed, flush penning system — H, L, U, corner post and tube sections.

Climate & Parts

Talk to an engineer

Tell us the room and we will specify the system

Send room dimensions, the animal stage and your target capacity. You get a layout, an equipment list and a quotation — not just a price per panel.