4-Scales 0.01mm Reticle Microscope Calibrating Ruler Multifunctional

Key Benefits

• 0.01mm resolution scale allows precise measurement of small features under a microscope
• Dual measurement systems (0.01mm x 100 and 0.1mm x 10) cover both fine and coarse calibration needs
• Two fixed calibration dots at 0.15mm and 0.07mm provide reference points for alignment checks
• Optical glass material ensures flatness and minimal distortion under magnification
• Compact 75mm x 25mm size fits standard microscope slide holders and stage mounts

Application Scenarios

• Calibrating a microscope's field of view or stage micrometer against a known scale
• Verifying the accuracy of digital measurement software in a digital inspection system
• Checking the consistency of magnification across different objectives in a biological or stereo microscope
• Training students in measurement techniques using a repeatable, traceable reference
• Documenting measurement precision during quality control inspections in electronics or precision engineering

Who It Is For

• Microscope operators in electronics, metallurgy and quality control labs
• University and school teaching labs requiring accurate measurement demonstrations
• Laboratories performing calibration checks on microscopes and imaging systems
• Precision assembly and inspection teams needing repeatable measurement references
• Research labs requiring traceable scale verification for published data

Problems It Solves

• A standard slide lacks a known scale, forcing operators to estimate dimensions under magnification
• No fixed reference points make it difficult to verify the accuracy of a microscope's measurement system
• Inconsistent scale markings across multiple slides lead to measurement drift in repeated inspections
• Lack of dual-scale resolution means users must switch tools for fine and coarse measurements
• Non-flat or low-quality materials distort the scale under high magnification, leading to incorrect readings

Technical Features

• Four measurement scales: 0.01mm x 100 = 1mm, 0.1mm x 10 = 1mm
• Two calibration reference dots at 0.15mm and 0.07mm for alignment verification
• Etched on optical glass for flatness and minimal optical distortion
• 75mm x 25mm x 1.1mm dimensions fit standard microscope slide holders
• Designed for use under microscope objectives with 10X to 40X magnification

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Custom scale divisions or calibration dot positions upon request
• Alternative sizes or thicknesses within the optical glass tolerance range
• Addition of a protective coating to reduce surface abrasion (if required)

Comparison With Other Options

Use Guide

• Place the ruler on the microscope stage and focus using a 10X or higher objective
• Align the 0.01mm scale with the field of view to verify measurement accuracy
• Use the 0.15mm and 0.07mm calibration dots as fixed reference points for alignment checks
• Ensure the slide is flat and not tilted to avoid parallax errors
• Clean the surface with lens paper before use to prevent dust or oil from affecting visibility