J01 Series Manual Mini Press J01-0.05 J01-0.2 and J03-0.6
These are hand and foot operated bench presses for light punching riveting and pressing work, the kind of job that does not justify a powered press and should not be done with a hammer. Punching power runs from 50 kg to 600 kg across the range: J01-0.05 is rated 0.5 kN, J01-0.2 is 2 kN and J03-0.6 is 6 kN. Both the shu...
What This Machine Does
These are hand and foot operated bench presses for light punching riveting and pressing work, the kind of job that does not justify a powered press and should not be done with a hammer. Punching power runs from 50 kg to 600 kg across the range: J01-0.05 is rated 0.5 kN, J01-0.2 is 2 kN and J03-0.6 is 6 kN. Both the shut height and the stroke are adjustable rather than fixed, which is what lets one press take several different tools: shut height is 110 mm on the two J01 models and 160 mm on J03-0.6, adjustable through 80 mm and 90 mm respectively, and stroke is 32 mm or 30 mm adjustable through 20 mm. Throat depth runs 60 mm 65 mm and 100 mm, so the press reaches in from the edge of a part. Stem hole sizes are 10 x 20 mm 12 x 25 mm and 12 x 35 mm. Weights are 9 kg 13.5 kg and 40 kg, so the small models move between benches by hand.
Why Buyers Choose This Machine
- Foot pedal or hand control leaves both hands free to hold and position small parts
- Punching force from 50 kg to 600 kg covers light punching riveting and pressing
- Adjustable shut height through 80 or 90 mm lets one press take several tool heights
- Adjustable stroke through 20 mm so the ram travel matches the job rather than the machine
- Throat depth up to 100 mm reaches in from the edge of a part
- 9 kg on J01-0.05 means the press moves to the work rather than the work to the press
- Compact structure fits on a crowded assembly bench
Where J01 Series Manual Mini Press J01-0.05 J01-0.2 an Earns Its Place
Problems It Solves
- Hammer and punch work damages parts and gives inconsistent results
- A powered press is oversized and unsafe for very light assembly operations
- Fixed shut height means a separate press for every tool height
- Holding a part with one hand and operating a lever with the other is slow and unsafe
- Short throat depth prevents the tool reaching a feature away from the part edge
Who It Is For
- Small parts assembly and subassembly lines
- Electronics instrument and hardware manufacturers
- Leather textile and plastic goods workshops
- Prototype and sample rooms
- Distributors supplying bench presses and workshop equipment
Application Scenarios
- Riveting small assemblies on a production bench
- Punching holes in thin sheet and plastic parts
- Pressing bushes bearings and pins into small components
- Marking and stamping small parts with a die
- Light assembly work in an electronics or instrument shop
- Sample and prototype work before committing to a powered press
Technical Detail
Technical Features
- Control by foot pedal or by hand
- Punching power 50 kg to 600 kg
- Maximum nominal pressure 0.5 kN 2 kN and 6 kN by model
- Maximum shut height 110 mm on J01 models and 160 mm on J03-0.6
- Shut height regulating capacity 80 mm and 90 mm
- Maximum stroke 32 mm and 30 mm with 20 mm stroke regulating capacity
- Throat depth 60 mm 65 mm and 100 mm
- Stem hole diameter 10 x 20 mm 12 x 25 mm and 12 x 35 mm
- Compact structure with guarding
Specifications
| Machine type | Manual bench press with hand or foot pedal control |
|---|---|
| Models | J01-0.05 / J01-0.2 / J03-0.6 |
| Max nominal pressure | 0.5 kN / 2 kN / 6 kN |
| Punching power | 50 kg to 600 kg |
| Max shut height | 110 mm / 110 mm / 160 mm |
| Shut height regulate capacity | 80 mm / 80 mm / 90 mm |
| Max stroke | 32 mm / 32 mm / 30 mm |
| Stroke regulate capacity | 20 mm |
| Throat depth | 60 mm / 65 mm / 100 mm |
| Diameter of stem hole | 10 x 20 mm / 12 x 25 mm / 12 x 35 mm |
| Bed dimension | 100 x 160 mm / 120 x 170 mm / 165 x 160 mm |
| Overall dimension | 170 x 160 x 275 mm / 190 x 220 x 290 mm / 265 x 210 x 480 mm |
| Weight | 9 kg / 13.5 kg / 40 kg |
Figures above are taken from the product information we hold. Send us your application and we will confirm the exact specification for the model quoted.
How It Is Built and What Can Be Changed
Operations Performed
- Punching
- Riveting
- Pressing
- Stamping
Quality Control
- Ram travel checked over the full stroke and against the stroke adjustment range
- Shut height adjustment checked through its full regulating capacity
- Stem hole dimensions verified against the specification
- Foot pedal and hand linkage tested for smooth operation and return
- Frame checked for alignment between ram and bed before packing
Customisation Options
- Model selected by the force you need from 0.5 kN to 6 kN
- Stem hole size matched to your existing tooling shanks
- Foot pedal or hand lever control specified
- Tooling and dies quoted against your part drawings
- Carton packaging and labelling prepared for retail or workshop distribution
How It Compares With the Alternatives
| JB04 series table press machine | The JB04 machines are motor driven at 10 to 50 kN with a continuous stroke rate; the J01 series is hand or foot operated at 0.5 to 6 kN for light bench work with no power supply |
|---|---|
| Arbor press | An arbor press gives force through a lever but has no adjustable shut height or stroke, so it cannot be set up around a fixed tool height |
| Hammer and hand punch | Hand punching gives a different result every time and damages parts; the press applies a set stroke against a fixed bed |
Running the Machine
Step 1
Bolt the press to a bench through the bed which is 100 x 160 mm to 165 x 160 mm by model
Step 2
Fit the tool in the stem hole for your model 10 x 20 mm 12 x 25 mm or 12 x 35 mm
Step 3
Set the shut height so the tool closes correctly on the part
Step 4
Set the stroke within the 20 mm regulating capacity so the ram travel matches the job
Step 5
Try the setting on a scrap part before starting the run
Step 6
Use the foot pedal so both hands are free to position the part
Step 7
Check the tool and stroke setting at the start of each batch
Related Applications and Guides
Sheet Metal Fabrication
Sheet metal shops cut, bend, roll and form. XAIMC supplies shears press brakes plate rolls tube benders and fibre laser cutting across the manual to C
Questions About J01 Series Manual Mini Press J01-0.05 J01-0.
How much force do these presses give?
Punching power is 50 kg to 600 kg across the range: 0.5 kN on J01-0.05, 2 kN on J01-0.2 and 6 kN on J03-0.6.
Can the stroke and shut height be adjusted?
Yes. Stroke is adjustable through 20 mm from a maximum of 32 mm or 30 mm, and shut height is adjustable through 80 mm or 90 mm from a maximum of 110 mm or 160 mm.
Is it operated by hand or by foot?
Either. The press can be controlled by foot pedal or by hand. Tell us which you want when ordering.
What tooling will fit?
The stem hole is 10 x 20 mm on J01-0.05, 12 x 25 mm on J01-0.2 and 12 x 35 mm on J03-0.6. Send us your tool shank dimensions and we will confirm the fit.
How heavy are they and how are they packed?
9 kg 13.5 kg and 40 kg respectively. They pack in cartons; send us the model and quantity and we will confirm carton size and gross weight.
Can you supply the dies as well?
Dies are quoted against your part drawings. Send us the part and the operation and we will price the tooling with the press.
What are your trade and payment terms?
We quote FOB CFR and CIF. Payment is 30 percent by T/T with the order and 70 percent before shipment, or an irrevocable L/C at sight.
Request a Quote on the J01 Series Manual Mini Press J01-0.05 J01-0.
Send us the work you need it to do, the voltage on your site and the port you ship to. We will come back with the model, the tooling and the lead time.