LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003

Product photograph supplied by the factory. Colour and print are set per order.

CAT3 Multipair Cable

30 Pair

utp cat3 Telephone cable 30 pair white

30 Pair is a 30 pair UTP CAT3 cable from the LANP CAT3 Multipair Cable range. As catalogued by the factory: utp cat3 Telephone cable 30 pair white.

It is supplied in White. It is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

CategoryCAT3 Multipair Cable
ShieldingUTP
ColourWhite
Pairs30 pair
MOQ100 m
Lead Time3-7 days

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Unshielded Build

30 Pair is an unshielded build, which means a smaller outside diameter and faster termination than a screened equivalent — the right trade in a conventional building.

30 Pair Build

30 pair on 30 Pair. Adding cores at order time is close to free; re-pulling a riser is a day.

White Jacket

30 Pair is catalogued in white, which is how most sites keep this service separate from everything else sharing the same containment.

OEM Branding Available

30 Pair can ship as a private label line: logo printed on the jacket from 1 km, plus custom box artwork, reel labels and bag printing.

Tested Before It Ships

Each production lot of 30 Pair is measured before packing. That is how the second order matches the sample you approved on the first.

Technical Data

Specification Sheet

Values below are the factory specification for 30 Pair. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product Name30 Pair
CategoryCAT3 Multipair Cable
Cable ClassCAT3
ShieldingUTP — unshielded twisted pair
Pairs30 pair
Jacket ColourWhite
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT3 specification
  • UTP — unshielded twisted pair
  • Jacket printed with specification and rating as standard

Materials

  • Conductor and jacket materials confirmed per order against the line specification

Who It Is For

  • Telecom contractors maintaining copper distribution
  • Building services contractors wiring voice risers
  • Door entry and intercom installers in apartment blocks
  • Distributors serving the telecoms trade

Problems It Solves

  • Large pair counts unavailable in small order quantities
  • Outdoor duct runs where a PVC jacket will not survive
  • Pair identification that varies between suppliers
  • Drum weight and handling on a high pair-count run

Application Scenarios

  • Voice riser and horizontal distribution
  • MDF and cross-connect work
  • Outdoor duct and aerial distribution
  • Door entry and intercom backbones
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design
Use Guide

Installing It Without Losing Performance

  • Use a pulling grip on 30 Pair rather than hand tension, and pull steadily. Jerked pulls are what turn a good drum into a failed link.
  • Every millimetre of untwisted conductor at a 30 Pair termination is unprotected cable. Strip back only as far as the contact block actually needs.
  • Keep 30 Pair off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.
  • Keep the 30 Pair pair code consistent through every joint and frame, and write the allocation down.
  • Leave a service loop at each 30 Pair termination so the cable can be re-worked without a splice.

Before a first bulk order of 30 Pair: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT3 Multipair Cable Range

See all 12 cat3 multipair cable products →

Related guides

Questions

30 Pair — Questions

What packing formats are available for 30 Pair?

Reel, coil and carton formats are all set per order for 30 Pair. Tell us how it will be handled on site and we will match the packing to that.

Can 30 Pair be supplied in another jacket colour?

Yes, on a production run. White is the stocked colour for 30 Pair, and a different code can be extruded if the destination market requires it.

What is the minimum order and lead time for 30 Pair?

A trial reel of 100 m is enough to evaluate 30 Pair. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Request pricing on 30 Pair

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.