LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
2 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT3 Multipair Cable

2 Pair Outdoor

UTP Cat3 Dual Jacketed Telecom Cable Outdoor LAN Network Cable 2 Pair

2 Pair Outdoor is a 2 pair UTP CAT3 cable from the LANP CAT3 Multipair Cable range, specified for external runs. The original specification reads: UTP Cat3 Dual Jacketed Telecom Cable Outdoor LAN Network Cable 2 Pair.

Order quantities start at 100 m for evaluation and scale to 50,000 m per run, at a typical bulk lead time of 3-7 days.

CategoryCAT3 Multipair Cable
ShieldingUTP
Pairs2 pair
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Unshielded Build

2 Pair Outdoor is an unshielded build, which means a smaller outside diameter and faster termination than a screened equivalent — the right trade in a conventional building.

Built For External Routes

Outdoor construction on 2 Pair Outdoor means the jacket survives sustained sunlight. A PVC cable in the same position chalks, cracks and lets water into the core.

2 Pair Build

With 2 pair, 2 Pair Outdoor leaves room for the device that gets added after handover — which is the normal case, not the exception.

OEM Branding Available

From 1 km we print your brand on 2 Pair Outdoor rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

2 Pair Outdoor does not leave the floor untested. Resistance, continuity and dielectric checks run on each production lot, and the records stay with the batch.

Technical Data

Specification Sheet

Values below are the factory specification for 2 Pair Outdoor. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product Name2 Pair Outdoor
CategoryCAT3 Multipair Cable
Cable ClassCAT3
ShieldingUTP — unshielded twisted pair
Pairs2 pair
InstallationOutdoor
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT3 specification
  • UTP — unshielded twisted pair
  • Jacket printed with specification and rating as standard

Materials

  • Conductor and jacket materials confirmed per order against the line specification

Who It Is For

  • Telecom contractors maintaining copper distribution
  • Building services contractors wiring voice risers
  • Door entry and intercom installers in apartment blocks
  • Distributors serving the telecoms trade

Problems It Solves

  • Large pair counts unavailable in small order quantities
  • Outdoor duct runs where a PVC jacket will not survive
  • Pair identification that varies between suppliers
  • Drum weight and handling on a high pair-count run

Application Scenarios

  • Voice riser and horizontal distribution
  • MDF and cross-connect work
  • Outdoor duct and aerial distribution
  • Door entry and intercom backbones
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
100 PairThis is the outdoor specification; that one is built for indoor use. The difference is the jacket, and substituting one for the other is the usual cause of a premature failure.
Use Guide

Installing It Without Losing Performance

  • Use a pulling grip on 2 Pair Outdoor rather than hand tension, and pull steadily. Jerked pulls are what turn a good drum into a failed link.
  • Terminate 2 Pair Outdoor with the twist maintained as close to the contact as possible. This single habit accounts for most first-time certification passes.
  • Tight bends deform the pairs inside 2 Pair Outdoor and change impedance at that point. The panel end is where this is most often violated.
  • Document which pairs of 2 Pair Outdoor are used at each end. Multi-pair cable without a record is archaeology for the next engineer.
  • Leave a service loop at each 2 Pair Outdoor termination so the cable can be re-worked without a splice.

Before a first bulk order of 2 Pair Outdoor: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT3 Multipair Cable Range

See all 12 cat3 multipair cable products →

CAT3 Multipair Cable10 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

10 Pair

Unshielded CAT3 Telephone UTP Multipairs Cable 10 pair 1000ft solid bare copper

UTP10 pair
View specification →
CAT3 Multipair Cable10 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

10 Pair Outdoor

Category 3 UTP Installation Cable 10 Pair Cat3 Telephone Cable 1000ft Spool Outdoor PE…

UTP10 pair
View specification →
CAT3 Multipair Cable100 Pair — CAT3 Multipair Cable manufactured by LANP CABLE

100 Pair

CAT3 CAT5e 100 Pair UTP 0.50mm PVC Indoor HYA Telecom Cable fast speed

UTP100 pair
View specification →
CAT3 Multipair Cable100 Pair Outdoor — CAT3 Multipair Cable manufactured by LANP CABLE

100 Pair Outdoor

Outdoor Direct Burial Underground 100Pair Cat3 Telecom Cable for voice data networking

100 pair
View specification →

Related guides

Questions

2 Pair Outdoor — Questions

What packing formats are available for 2 Pair Outdoor?

Packing for 2 Pair Outdoor is decided with the order — reels, coils or cartons, in whatever unit length suits the installers.

Can you print our brand on 2 Pair Outdoor?

From 1 km we extrude your brand onto the 2 Pair Outdoor jacket itself. Under that minimum the branding goes on packaging instead.

What is the minimum order and lead time for 2 Pair Outdoor?

2 Pair Outdoor is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

Request pricing on 2 Pair Outdoor

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue