New factory sealed hardware from Hong Kong · serial list before shipment
Solution

Top of Rack Capacity Delivered as Complete Cabinet Kits

A cabinet is commissioned as a unit, so it should be supplied as one. Switches, optics, rails and power leads belong in the same consignment.

Sealed stock allocated against a Data Center Switching Build

Programme quantities allocated in one block so the price holds across every phase.

Process

The Six Steps We Work Through

  1. Cabinet Definition

    Port counts uplink speeds and redundancy fixed per cabinet type rather than per device

  2. Optical Plan

    Reach measured across the real fibre path and matched to specific transceiver part numbers

  3. Kit Specification

    Each cabinet type resolved into one repeatable kit list including rails and cable management

  4. Batch Allocation

    Optics allocated from one batch so link budgets are consistent across identical uplinks

  5. Phased Release

    Kits released as cabinets are energised rather than all at once

  6. Spares Provision

    A defined spares ratio held against the same part numbers

Relevant Hardware

Groups This Programme Draws On

Frequently Supplied

Models Commonly Supplied Under This Programme

Huawei

eSFP-GE-SX-MM850

Huawei eSFP-GE-SX-MM850 is Optical Transceiver. It's a Multi-mode Module. The published specification for eSFP-GE-SX-MM850 lists a published transmiss

Cisco

C9200-NM-4G

C9200-NM-4G is the Catalyst 9200 4 x 1GE Network Module, spare. The published specification for C9200-NM-4G lists 4 x 1GE SFP+ and a published data tr

HPE

507284-001

300GB SAS hard disk drive - 6Gb/sec transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF). The published specification for 507284-001 lists 300G

HPE

581311-001

600GB hot-plug dual-port SAS hard disk drive - 6Gb/s transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF) - For use with Gen7 or earlier models

HPE

605835-B21

HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive For Use with Gen7 or Earlier Models S-ERVER. The published specificati

HPE

619291-B21

HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive For Use with Gen7 or Earlier Models S-ERVER. The published specificati

HPE

652583-B21

HPE 600GB SAS 6G Enterprise 10K SFF (2.5in) SC 3YR Wty HDD For Use with Gen8/Gen9 or Newer S-ERVER. The published specification for 652583-B21 lists 6

HPE

652589-B21

65259-B21 is HP 6TB 3.5-inch LFF SAS 12Gb/s 7.2K RPM 512e Midline (MDL) Hot-Plug Hard Drive. The published specification for 652589-B21 lists a publis

Industries

Sectors This Programme Serves

Data Center

Top of rack switching, compute and storage delivered in the phased increments a cabinet build actually consumes.

Service Provider

Repeatable CPE and aggregation hardware supplied at the volume and consistency a managed service contract depends on.

Project Cases

Project Cases Run This Way

Knowledge Center

Guides Behind This Programme

FAQ

Data Center Switching Build Questions

What Is Included in the Data Center Switching Build Programme

The six steps on this page, from the initial audit or definition through to the records handed over at the end. Hardware supply is one part of it.

Do I Have to Buy All the Hardware Up Front

No, but allocating the full quantity early is usually what holds the price and the availability. Delivery still stages against your own calendar.

Can You Work With Our Existing Design

Yes. Most of this work starts from a bill of materials that already exists and is reviewed line by line for omissions before it is priced.

Who Holds the Support Entitlement

The end customer. Contracts are registered under the end user name so the entitlement sits with the organisation that owns the outage.

Start a Data Center Switching Build

Send the estate size, the sites involved and the dates you are working to. The first response is a scope, not a price list.