P00922-B21
P00922-B21 - HPE Server Memories HPE 16GB Dual Rank X8 DDR4-2933. It is supplied new factory sealed, with the serial list issued before shipment and 1


HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive For Use with Gen7 or Earlier Models S-ERVER. The published specification for 619291-B21 lists 1,000,204,886,016 of capacity. It is supplied new factory sealed, with the serial list...
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive For Use with Gen7 or Earlier Models S-ERVER. The published specification for 619291-B21 lists 1,000,204,886,016 of capacity. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.
1,000,204,886,016 supplied against a stated chassis or array generation, so acceptance is confirmed before despatch rather than at the rack.
Modules optics rails and power options are reviewed against 619291-B21 before the quotation is issued, so the install crew is not blocked by a line nobody costed.
A vendor support contract for 619291-B21 is written under the end customer name, so the entitlement sits with the organisation that owns the outage.
The serial list for your 619291-B21 consignment is released before despatch, so it can be checked on the manufacturer portal while the goods are still with us.
Building repeatable nodes where every batch has to match the last one
Holding spares against generations the mainstream channel has already dropped
Bidding work that needs firm pricing and a written lead time before the end client is quoted
Standardising hardware across many customer sites and needing the same SKU available again
As published by HPE for this part number. Full electrical, port and performance specifications are issued with the quotation against the current datasheet revision.
| Capacity | 1,000,204,886,016 |
|---|---|
| Height | 0.63 in (16.0 mm) |
| Width | 3.1 in (78.7 mm) |
| Depth | 5.45 in (138.4 mm) |
| Interface | SAS |
| Transfer Rate Synchronous (Maximum) | 6 Gb/sec |
| Seek Time (typical reads, including settling) | Single Track: 0.5 ms Average: 8.2ms Full-Stroke: 17.55 ms Rotational Speed: 7,200 rpm |
| Physical Configuration | Bytes/Sector: 512 Logical Blocks: 976,773,168 |
| Operating Temperature (System Inlet Air Temperature) | 50 deg to 95 deg F (10 deg to 35 deg C) |
| Part Number | 619291-B21 |
|---|---|
| Brand | HPE |
| Category | HPE Server Components |
| Product Condition | New factory sealed |
| Serial Traceability | Full serial list supplied before shipment |
| Warranty | 12 months replacement plus optional vendor support contract |
| Packaging | Original vendor carton with export grade outer |
| Lead Time | Confirmed in writing per line at quotation |
| Delivery | Worldwide courier or freight from Hong Kong |
Values are taken from each manufacturer specification. A blank means the manufacturer does not publish that attribute for that model.
| Attribute | 619291-B21 | P00922-B21 | P00924-B21 | P00926-B21 |
|---|---|---|---|---|
| Capacity | 1,000,204,886,016 | - | - | - |
| Interface | SAS | - | - | - |
| Memory Type | - | 16GB | 32GB | 64GB |
| Memory Speed | - | 2933 MT/s | 2933 MT/s | 2933 MT/s |
| DIMM Rank | - | Dual | Dual | Quad |
| Designed For | - | HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy | HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy | HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy |
| Product page | View 619291-B21 | View P00922-B21 | View P00924-B21 | View P00926-B21 |
Check 619291-B21 character for character including any suffix. On this class of hardware a single trailing character commonly changes the software tier, the power option, or whether a bundle is included.
Confirm rack space, power feed, cabling and any uplink or accessory dependency before the order rather than on the day of installation.
Photograph the sealed carton, reconcile the serial against the list supplied before shipment, then open and confirm the unit matches the label.
Power the unit, capture the software version and the port or drive inventory, and record it while the unit is still accessible.
Register the support contract under the end user name so the entitlement sits with the organisation that owns the outage.
P00922-B21 - HPE Server Memories HPE 16GB Dual Rank X8 DDR4-2933. It is supplied new factory sealed, with the serial list issued before shipment and 1
P00924-B21 - HPE Server Memories HPE 32GB (1x32GB) Dual Rank x4 DDR4-2933 CAS-21-21-21 Registered Smart Memory Kit, P00924-B21. It is supplied new fac
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2933 CAS-21-21-21 Load Reduced Smart Memory Kit, P00926-B21. It is supplied new factory sealed, with the serial li
P00930-B21 - HPE Server Memories HPE 64GB (1x64GB) Dual Rank x4 DDR4-2933 CAS-21-21-21 Registered Smart Memory Kit. It is supplied new factory sealed,
P04556-B21 is the HPE 240GB SATA 6G Read Intensive SFF SC PM883 SSD. It is supplied new factory sealed, with the serial list issued before shipment an
P04560-B21 is the HPE 480GB SATA 6G Read Intensive SFF SC PM883 SSD. It is supplied new factory sealed, with the serial list issued before shipment an
P04564-B21 Overview P04564-B21 is the HPE 960GB SATA 6G Read Intensive SFF SC PM883 SSD. It is supplied new factory sealed, with the serial list issue
P04566-B21 HPE 1.92TB SATA SFF SSD. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty
Top of rack switching, compute and storage delivered in the phased increments a cabinet build actually consumes.
Hardware supplied with the traceability and change discipline a clinical environment requires.
A support contract registered under a reseller name is of limited use to the organisation that owns the outage. Entitlement is written under the end user name.
Hong Kong is a practical despatch point for most of the world. Consignments go to the site, not to a central store and then out again.
An integrator carries the risk between quoting a client and receiving the hardware. Firm pricing and a written lead time per line is what makes that risk manageable.
Nodes were arriving without rails or caddies, so racking waited on a second consignment and the revenue date moved
The tender required a firm price and date at submission, months before any award, across a bill of materials of several hundred lines
A drive that fits physically can still be rejected. Interface, caddy generation and firmware all have to agree with the chassis.
Checks that cost minutes on arrival and save a great deal later. Most of them can be done before the carton is opened.
The choice is rarely about quality. It is about entitlement, traceability and what happens eighteen months after the invoice is paid.
Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.
Yes. Serials are issued before shipment so you can check them on the manufacturer portal while the goods are still with us.
Availability is confirmed in writing per line at quotation rather than as a project average, because one late line is what moves an installation date.
12 months replacement as standard. A vendor support contract is available separately and is registered under the end user name.
The manufacturer lists capacity of 1,000,204,886,016. Capacity is quoted against a named chassis or array generation, because acceptance depends on the platform rather than on the capacity alone.
Yes. Consignments go worldwide by courier or freight from Hong Kong, with the routing chosen against the destination clearance regime and your deadline.
Yes. Consignments can be released directly to an end customer address under your own documentation.
Send the quantity and destination country. Availability and lead time come back in writing, with the serial list before shipment.