J9F46A
HPE MSA 600gb 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty Hard Drive S-ERVER. The published specification for J9F46A lists a published da


HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive For Use with Gen7 or Earlier Models S-ERVER. The published specification for 605835-B21 lists 1,000,204,886,016 of capacity. It is supplied new factory sealed, with the serial list...
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive For Use with Gen7 or Earlier Models S-ERVER. The published specification for 605835-B21 lists 1,000,204,886,016 of capacity. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.
1,000,204,886,016 supplied against a stated chassis or array generation, so acceptance is confirmed before despatch rather than at the rack.
The serial list for your 605835-B21 consignment is released before despatch, so it can be checked on the manufacturer portal while the goods are still with us.
Modules optics rails and power options are reviewed against 605835-B21 before the quotation is issued, so the install crew is not blocked by a line nobody costed.
A vendor support contract for 605835-B21 is written under the end customer name, so the entitlement sits with the organisation that owns the outage.
Building repeatable nodes where every batch has to match the last one
Rolling out one site design across many locations on a fixed bill of materials
Deploying managed hardware at customer premises with consistent revision and firmware
Delivering inside vacation windows against a budget year that rarely aligns with the install date
As published by HPE for this part number. Full electrical, port and performance specifications are issued with the quotation against the current datasheet revision.
| Capacity | 1,000,204,886,016 |
|---|---|
| Height | 0.63 in (16.0 mm) |
| Width | 3.1 in (78.7 mm) |
| Depth | 5.45 in (138.4 mm) |
| Interface | SAS |
| Transfer Rate Synchronous (Maximum) | 6 Gb/sec |
| Seek Time (typical reads, including settling) | Single Track: 0.5 ms Average: 8.2ms Full-Stroke: 17.55 ms Rotational Speed: 7,200 rpm |
| Physical Configuration | Bytes/Sector: 512 Logical Blocks: 976,773,168 |
| Operating Temperature (System Inlet Air Temperature) | 50 deg to 95 deg F (10 deg to 35 deg C) |
| Part Number | 605835-B21 |
|---|---|
| Brand | HPE |
| Category | HPE Server Components |
| Product Condition | New factory sealed |
| Serial Traceability | Full serial list supplied before shipment |
| Warranty | 12 months replacement plus optional vendor support contract |
| Packaging | Original vendor carton with export grade outer |
| Lead Time | Confirmed in writing per line at quotation |
| Delivery | Worldwide courier or freight from Hong Kong |
Values are taken from each manufacturer specification. A blank means the manufacturer does not publish that attribute for that model.
| Attribute | 605835-B21 | J9F46A | J9F48A | J9F49A |
|---|---|---|---|---|
| Capacity | 1,000,204,886,016 | - | - | - |
| Interface | SAS | Serial Attached SCSI 3 | - | - |
| Throughput | - | 1.2 GBps | - | - |
| Form Factor | - | 2.5 SFF | - | Hot-swap |
| Storage | - | - | 1.20 TB | - |
| Description | - | - | Hard Drive | - |
| Product page | View 605835-B21 | View J9F46A | View J9F48A | View J9F49A |
Check 605835-B21 character for character including any suffix. On this class of hardware a single trailing character commonly changes the software tier, the power option, or whether a bundle is included.
Confirm rack space, power feed, cabling and any uplink or accessory dependency before the order rather than on the day of installation.
Photograph the sealed carton, reconcile the serial against the list supplied before shipment, then open and confirm the unit matches the label.
Power the unit, capture the software version and the port or drive inventory, and record it while the unit is still accessible.
Register the support contract under the end user name so the entitlement sits with the organisation that owns the outage.
HPE MSA 600gb 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty Hard Drive S-ERVER. The published specification for J9F46A lists a published da
HPE MSA 1.2TB 12G SAS 10K 2.5in ENT HDD S-ERVER. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacem
HPE MSA 1.8TB 12G SAS 10K SFF (2.5in) 512E Enterprise 3yr Warranty Hard Drive S-ERVER. It is supplied new factory sealed, with the serial list issued
P00922-B21 - HPE Server Memories HPE 16GB Dual Rank X8 DDR4-2933. It is supplied new factory sealed, with the serial list issued before shipment and 1
P00924-B21 - HPE Server Memories HPE 32GB (1x32GB) Dual Rank x4 DDR4-2933 CAS-21-21-21 Registered Smart Memory Kit, P00924-B21. It is supplied new fac
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2933 CAS-21-21-21 Load Reduced Smart Memory Kit, P00926-B21. It is supplied new factory sealed, with the serial li
P00930-B21 - HPE Server Memories HPE 64GB (1x64GB) Dual Rank x4 DDR4-2933 CAS-21-21-21 Registered Smart Memory Kit. It is supplied new factory sealed,
P04556-B21 is the HPE 240GB SATA 6G Read Intensive SFF SC PM883 SSD. It is supplied new factory sealed, with the serial list issued before shipment an
Top of rack switching, compute and storage delivered in the phased increments a cabinet build actually consumes.
Hardware supplied with the traceability and change discipline a clinical environment requires.
An integrator carries the risk between quoting a client and receiving the hardware. Firm pricing and a written lead time per line is what makes that risk manageable.
A cabinet is commissioned as a unit, so it should be supplied as one. Switches, optics, rails and power leads belong in the same consignment.
A server order is judged on whether the node goes in on the booked date, which depends almost entirely on the parts that are not the server.
Nodes were arriving without rails or caddies, so racking waited on a second consignment and the revenue date moved
The tender required a firm price and date at submission, months before any award, across a bill of materials of several hundred lines
The choice is rarely about quality. It is about entitlement, traceability and what happens eighteen months after the invoice is paid.
A support contract is bought once and used on the worst day of the year. The level and the name it is registered under both matter.
A drive that fits physically can still be rejected. Interface, caddy generation and firmware all have to agree with the chassis.
Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.
Yes. Serials are issued before shipment so you can check them on the manufacturer portal while the goods are still with us.
Availability is confirmed in writing per line at quotation rather than as a project average, because one late line is what moves an installation date.
12 months replacement as standard. A vendor support contract is available separately and is registered under the end user name.
The manufacturer lists capacity of 1,000,204,886,016. Capacity is quoted against a named chassis or array generation, because acceptance depends on the platform rather than on the capacity alone.
Yes. Consignments go worldwide by courier or freight from Hong Kong, with the routing chosen against the destination clearance regime and your deadline.
Yes. Consignments can be released directly to an end customer address under your own documentation.
Send the quantity and destination country. Availability and lead time come back in writing, with the serial list before shipment.