872477-B21
HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) Sc 3yr Wty Digitally Signed Firmware HDD. It is supplied new factory sealed, with the serial list issued
HPE · HPE Server Components
507284-001
300GB SAS hard disk drive - 6Gb/sec transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF). The published specification for 507284-001 lists 300GB of capacity. It is supplied new factory sealed, with the serial list issued before shipment and 12 months re...
- Capacity
- 300GB
- Interface
- SAS
- Speed
- 10K RPM
- Form Factor
- 2.5 inch
- Drive Support
- Gen7 or earlier models
- Dimensions
- 2.7 x 0.37 x 3.96 in
- New factory sealed in the original vendor carton
- Serial list issued before shipment
- 12 months replacement warranty as standard
- Worldwide courier or freight from Hong Kong
Product Overview
507284-001 Overview
300GB SAS hard disk drive - 6Gb/sec transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF). The published specification for 507284-001 lists 300GB of capacity. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.
Key Benefits
What Owning 507284-001 Changes
Capacity Matched to the Installed Platform
300GB supplied against a stated chassis or array generation, so acceptance is confirmed before despatch rather than at the rack.
Serials Issued Before It Ships
The serial list for your 507284-001 consignment is released before despatch, so it can be checked on the manufacturer portal while the goods are still with us.
A Complete Bill of Materials
Modules optics rails and power options are reviewed against 507284-001 before the quotation is issued, so the install crew is not blocked by a line nobody costed.
Support Registered Under the End User Name
A vendor support contract for 507284-001 is written under the end customer name, so the entitlement sits with the organisation that owns the outage.
Problems It Solves
Pain Points 507284-001 Removes
- Caddies rails and cable management ordered as an afterthought
- End of sale announcements that leave a proven design with no supply route for 507284-001
- Spares pools for server generations the mainstream channel has already dropped
- DIMM rank voltage and speed combinations that will not post in the target chassis
- Drives supplied at a firmware level the array or controller rejects
Who It Is For
Who Benefits Most From 507284-001
Hosting Providers
Building repeatable nodes where every batch has to match the last one
Maintenance and Support Companies
Holding spares against generations the mainstream channel has already dropped
System Integrators
Bidding work that needs firm pricing and a written lead time before the end client is quoted
Managed Service Providers
Standardising hardware across many customer sites and needing the same SKU available again
Specifications
507284-001 Manufacturer Specification
As published by HPE for this part number. Full electrical, port and performance specifications are issued with the quotation against the current datasheet revision.
| Form Factor | 2.5 inch |
|---|---|
| Capacity | 300GB |
| Interface | SAS |
| Speed | 10K RPM |
| Features | Capacity: 300GB, for your data storage needs SAS - 6Gb/s interface optimizes burst performance Spindle Speed: 10K RPM for improving data transfer rate |
| Weight | 2.00 LBS |
| Dimension (W x H x D) | 2.7 x 0.37 x 3.96 in. |
| Supported Device | Gen7 or earlier models |
Supply Terms
How 507284-001 Is Supplied
| Part Number | 507284-001 |
|---|---|
| Brand | HPE |
| Category | HPE Server Components |
| Product Condition | New factory sealed |
| Serial Traceability | Full serial list supplied before shipment |
| Warranty | 12 months replacement plus optional vendor support contract |
| Packaging | Original vendor carton with export grade outer |
| Lead Time | Confirmed in writing per line at quotation |
| Delivery | Worldwide courier or freight from Hong Kong |
Comparison
507284-001 Against Other Models in HPE Server Components
Values are taken from each manufacturer specification. A blank means the manufacturer does not publish that attribute for that model.
| Attribute | 507284-001 | 872477-B21 | 872481-B21 | 873359-B21 |
|---|---|---|---|---|
| Capacity | 300GB | - | - | 400GB |
| Interface | SAS | - | - | - |
| Speed | 10K RPM | - | - | - |
| Form Factor | 2.5 inch | 2.5" SFF | - | Solid State Drive |
| Drive Support | Gen7 or earlier models | Hot-swap hard drive | - | - |
| Dimensions | 2.7 x 0.37 x 3.96 in | - | - | - |
| Product page | View 507284-001 | View 872477-B21 | View 872481-B21 | View 873359-B21 |
Use Guide
Deployment Guide for 507284-001
Confirm the Full Part Number
Check 507284-001 character for character including any suffix. On this class of hardware a single trailing character commonly changes the software tier, the power option, or whether a bundle is included.
Check Site Prerequisites
Confirm rack space, power feed, cabling and any uplink or accessory dependency before the order rather than on the day of installation.
Record It on Arrival
Photograph the sealed carton, reconcile the serial against the list supplied before shipment, then open and confirm the unit matches the label.
Bench Power Before Racking
Power the unit, capture the software version and the port or drive inventory, and record it while the unit is still accessible.
Register Support Entitlement
Register the support contract under the end user name so the entitlement sits with the organisation that owns the outage.
Related Products
Other Models in HPE Server Components
872481-B21
HPE 1.8TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD. It is supplied new factory sealed, with the serial list is
873359-B21
HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD S-ERVER. The published specification for 873359-B21 lists a published
881457-B21
881457-B21 HPE 2.4TB SAS 12G 10K SFF SC 512E DS HDD. It is supplied new factory sealed, with the serial list issued before shipment and 12 months repl
J9F46A
HPE MSA 600gb 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty Hard Drive S-ERVER. The published specification for J9F46A lists a published da
J9F48A
HPE MSA 1.2TB 12G SAS 10K 2.5in ENT HDD S-ERVER. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacem
J9F49A
HPE MSA 1.8TB 12G SAS 10K SFF (2.5in) 512E Enterprise 3yr Warranty Hard Drive S-ERVER. It is supplied new factory sealed, with the serial list issued
P00922-B21
P00922-B21 - HPE Server Memories HPE 16GB Dual Rank X8 DDR4-2933. It is supplied new factory sealed, with the serial list issued before shipment and 1
Where It Goes
Industries That Deploy It
Healthcare
Hardware supplied with the traceability and change discipline a clinical environment requires.
Data Center
Top of rack switching, compute and storage delivered in the phased increments a cabinet build actually consumes.
Solutions
Programmes It Is Supplied Under
Procurement for System Integrators
An integrator carries the risk between quoting a client and receiving the hardware. Firm pricing and a written lead time per line is what makes that risk manageable.
Data Center Switching Build
A cabinet is commissioned as a unit, so it should be supplied as one. Switches, optics, rails and power leads belong in the same consignment.
Server and Storage Supply
A server order is judged on whether the node goes in on the booked date, which depends almost entirely on the parts that are not the server.
Reference
Project Cases and Guides
Hosting Provider Repeatable Node Build
Nodes were arriving without rails or caddies, so racking waited on a second consignment and the revenue date moved
System Integrator Data Center Tender
The tender required a firm price and date at submission, months before any award, across a bill of materials of several hundred lines
Verifying Hardware Authenticity
Checks that cost minutes on arrival and save a great deal later. Most of them can be done before the carton is opened.
New Versus Refurbished Network Hardware
The choice is rarely about quality. It is about entitlement, traceability and what happens eighteen months after the invoice is paid.
Support Contracts Explained for Buyers
A support contract is bought once and used on the worst day of the year. The level and the name it is registered under both matter.
FAQ
507284-001 Frequently Asked Questions
Is 507284-001 New or Refurbished
Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.
Can I Get the Serial Numbers for 507284-001 Before Payment Clears
Yes. Serials are issued before shipment so you can check them on the manufacturer portal while the goods are still with us.
What Is the Lead Time for 507284-001
Availability is confirmed in writing per line at quotation rather than as a project average, because one late line is what moves an installation date.
What Warranty Does 507284-001 Carry
12 months replacement as standard. A vendor support contract is available separately and is registered under the end user name.
What Capacity Does 507284-001 Provide
The manufacturer lists capacity of 300GB. Capacity is quoted against a named chassis or array generation, because acceptance depends on the platform rather than on the capacity alone.
Can You Ship 507284-001 to My Country
Yes. Consignments go worldwide by courier or freight from Hong Kong, with the routing chosen against the destination clearance regime and your deadline.
Can You Drop Ship 507284-001 to My Customer
Yes. Consignments can be released directly to an end customer address under your own documentation.
Request Pricing for 507284-001
Send the quantity and destination country. Availability and lead time come back in writing, with the serial list before shipment.