652605-B21
HPE 146GB SAS 6G Enterprise 15K SFF (2.5in) SC 3yr Warranty HDD For Use with Gen8/Gen9 or Newer S-ERVER. The published specification for 652605-B21 li


600GB hot-plug dual-port SAS hard disk drive - 6Gb/s transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF) - For use with Gen7 or earlier models S-ERVER. The published specification for 581311-001 lists Dual Port and 600GB of capacity. It is supplied new...
600GB hot-plug dual-port SAS hard disk drive - 6Gb/s transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF) - For use with Gen7 or earlier models S-ERVER. The published specification for 581311-001 lists Dual Port and 600GB of capacity. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.
Dual Port on this part number, so the closet design is checked against the real layout rather than against a family datasheet that covers several models.
600GB supplied against a stated chassis or array generation, so acceptance is confirmed before despatch rather than at the rack.
Modules optics rails and power options are reviewed against 581311-001 before the quotation is issued, so the install crew is not blocked by a line nobody costed.
A vendor support contract for 581311-001 is written under the end customer name, so the entitlement sits with the organisation that owns the outage.
The serial list for your 581311-001 consignment is released before despatch, so it can be checked on the manufacturer portal while the goods are still with us.
Building repeatable nodes where every batch has to match the last one
Running one access standard across buildings of very different ages
Holding spares against generations the mainstream channel has already dropped
Bidding work that needs firm pricing and a written lead time before the end client is quoted
As published by HPE for this part number. Full electrical, port and performance specifications are issued with the quotation against the current datasheet revision.
| Sub-Category | 10K |
|---|---|
| Generation | SAS |
| Type | Hard Drive - Hot-Swap |
| Capacity | 600GB |
| Interface Type | Serial Attached SCSI |
| Spindle Speed | 10000RPM |
| Ports | Dual Port |
| Speed | 6GB/s |
| Supported Device | Gen7 or earlier models |
| Part Number | 581311-001 |
|---|---|
| Brand | HPE |
| Category | HPE Server Components |
| Product Condition | New factory sealed |
| Serial Traceability | Full serial list supplied before shipment |
| Warranty | 12 months replacement plus optional vendor support contract |
| Packaging | Original vendor carton with export grade outer |
| Lead Time | Confirmed in writing per line at quotation |
| Delivery | Worldwide courier or freight from Hong Kong |
Values are taken from each manufacturer specification. A blank means the manufacturer does not publish that attribute for that model.
| Attribute | 581311-001 | 652605-B21 | 652611-B21 | 655710-B21 |
|---|---|---|---|---|
| Ports | Dual Port | - | - | - |
| Capacity | 600GB | 146,815MB | 300,000MB | 1TB |
| Speed | 6GB/s | - | - | 7.2K RPM |
| Form Factor | Hard Drive - Hot-Swap | - | - | 2.5 inch |
| Drive Support | Gen7 or earlier models | - | - | - |
| Interface | - | SAS | SAS | SATA |
| Product page | View 581311-001 | View 652605-B21 | View 652611-B21 | View 655710-B21 |
Check 581311-001 character for character including any suffix. On this class of hardware a single trailing character commonly changes the software tier, the power option, or whether a bundle is included.
Confirm rack space, power feed, cabling and any uplink or accessory dependency before the order rather than on the day of installation.
Photograph the sealed carton, reconcile the serial against the list supplied before shipment, then open and confirm the unit matches the label.
Power the unit, capture the software version and the port or drive inventory, and record it while the unit is still accessible.
Register the support contract under the end user name so the entitlement sits with the organisation that owns the outage.
HPE 146GB SAS 6G Enterprise 15K SFF (2.5in) SC 3yr Warranty HDD For Use with Gen8/Gen9 or Newer S-ERVER. The published specification for 652605-B21 li
HPE 300GB 2.5" SAS 15K 6Gb/s HS Enterprise Hard Drive for Gen9 S-ERVER. The published specification for 652611-B21 lists 300,000MB of capacity. It is
HPE 1TB SATA 6G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD S-ERVER. The published specification for 655710-B21 lists 1TB of cap
672631-B21- Enterprise Memory for HPE Server HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit for HPE ProLiant Gen7,
713985-B21- Enterprise Memory for HPE Server HPE 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage Memory Kit S-ERVER.
HPE 1.2TB SAS 6G Enterprise 10K SFF (2.5in) SC 1yr Wty HDD For Use With Gen8/Gen9 S-ERVER. The published specification for 718162-B21 lists 1,200,243M
726719-B21- Enterprise Memory for HPE Server HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit:ProLiant Servers - Memory Gen
726722-B21- Enterprise Memory for HPE Server HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit S-ERVER. It is supplied new fa
Hardware supplied with the traceability and change discipline a clinical environment requires.
Top of rack switching, compute and storage delivered in the phased increments a cabinet build actually consumes.
An integrator carries the risk between quoting a client and receiving the hardware. Firm pricing and a written lead time per line is what makes that risk manageable.
A cabinet is commissioned as a unit, so it should be supplied as one. Switches, optics, rails and power leads belong in the same consignment.
A server order is judged on whether the node goes in on the booked date, which depends almost entirely on the parts that are not the server.
The tender required a firm price and date at submission, months before any award, across a bill of materials of several hundred lines
Nodes were arriving without rails or caddies, so racking waited on a second consignment and the revenue date moved
A support contract is bought once and used on the worst day of the year. The level and the name it is registered under both matter.
A drive that fits physically can still be rejected. Interface, caddy generation and firmware all have to agree with the chassis.
Checks that cost minutes on arrival and save a great deal later. Most of them can be done before the carton is opened.
Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.
Yes. Serials are issued before shipment so you can check them on the manufacturer portal while the goods are still with us.
Availability is confirmed in writing per line at quotation rather than as a project average, because one late line is what moves an installation date.
12 months replacement as standard. A vendor support contract is available separately and is registered under the end user name.
They are quoted as separate lines and reviewed against the chassis before the quotation is issued, so they reach site in the same consignment as the unit they belong to.
The manufacturer does not publish an available PoE figure for this model, which normally indicates a data only variant. Where powered devices are in the design, confirm the port type letter in the part number before ordering.
The manufacturer lists capacity of 600GB. Capacity is quoted against a named chassis or array generation, because acceptance depends on the platform rather than on the capacity alone.
Yes. Consignments go worldwide by courier or freight from Hong Kong, with the routing chosen against the destination clearance regime and your deadline.
Yes. Consignments can be released directly to an end customer address under your own documentation.
Send the quantity and destination country. Availability and lead time come back in writing, with the serial list before shipment.