OSX010000
Huawei OSX010000 is a 10G Optical Transceiver. It's a Single-mode Module. The published specification for OSX010000 lists a published transmission spe

Huawei eSFP-GE-SX-MM850 is Optical Transceiver. It's a Multi-mode Module. The published specification for eSFP-GE-SX-MM850 lists a published transmission speed of GE and 850 nm. It is supplied new factory sealed, with the serial list issued before shipment and...
Huawei eSFP-GE-SX-MM850 is Optical Transceiver. It's a Multi-mode Module. The published specification for eSFP-GE-SX-MM850 lists a published transmission speed of GE and 850 nm. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.
GE published for eSFP-GE-SX-MM850 as its transmission speed, confirmed against the current datasheet revision when the line is quoted.
850 nm for this module, matched to the measured fibre path including patch points rather than to a straight line distance.
A vendor support contract for eSFP-GE-SX-MM850 is written under the end customer name, so the entitlement sits with the organisation that owns the outage.
The serial list for your eSFP-GE-SX-MM850 consignment is released before despatch, so it can be checked on the manufacturer portal while the goods are still with us.
Modules optics rails and power options are reviewed against eSFP-GE-SX-MM850 before the quotation is issued, so the install crew is not blocked by a line nobody costed.
Standardising hardware across many customer sites and needing the same SKU available again
Replacing equipment that has reached end of support before an audit rather than after one
Adding capacity in defined increments as cabinets and rows fill up
Rolling out one site design across many locations on a fixed bill of materials
As published by Huawei for this part number. Full electrical, port and performance specifications are issued with the quotation against the current datasheet revision.
| Transceiver form factor | eSFP |
|---|---|
| Transmission speed | GE |
| Center wavelength (nm) | 850 |
| Standard compliance | 1000base-SX |
| Connector type | LC |
| Applicable cable and maximum transmission distance | · Multimode fiber (with modal bandwidth of 160 MHz*km and diameter of 62.5 μm): 0.22 km · Multimode fiber (OM1): 0.275 km · Multimode fiber (with modal bandwidth of 400 MHz*km and diameter of 50 μm): 0.5 km · Multimode fiber (OM2): 0.55 km · Multimode fiber (OM3): 1 km |
| Transmit power (dBm) | -9.5 to -2.5 |
| Maximum receiver sensitivity (dBm) | -17.0 |
| Overload power (dBm) | 0 |
| Extinction ratio (dB) | 9 |
| Operating temperature | 0 degC to 70 degC (32 degF to 158 degF) |
| Net Dimension(D x W x H mm) | 110 x 70 x 37 |
| Part Number | eSFP-GE-SX-MM850 |
|---|---|
| Brand | Huawei |
| Category | Huawei Optical Transceivers |
| Product Condition | New factory sealed |
| Serial Traceability | Full serial list supplied before shipment |
| Warranty | 12 months replacement plus optional vendor support contract |
| Packaging | Original vendor carton with export grade outer |
| Lead Time | Confirmed in writing per line at quotation |
| Delivery | Worldwide courier or freight from Hong Kong |
Values are taken from each manufacturer specification. A blank means the manufacturer does not publish that attribute for that model.
| Attribute | eSFP-GE-SX-MM850 | OSX010000 | SFP-25G-SR | SFP-GE-LX-SM1310 |
|---|---|---|---|---|
| Throughput | GE | 10 Gbit/s | 25GE | - |
| Connector type | LC | LC | LC | - |
| Reach | 850 nm | 1310 nm | - | - |
| Form Factor | eSFP | SFP+ | SFP28 | Optical Transceiver |
| Interface | - | - | - | LC Connector |
| Product page | View eSFP-GE-SX-MM850 | View OSX010000 | View SFP-25G-SR | View SFP-GE-LX-SM1310 |
Check eSFP-GE-SX-MM850 character for character including any suffix. On this class of hardware a single trailing character commonly changes the software tier, the power option, or whether a bundle is included.
Confirm rack space, power feed, cabling and any uplink or accessory dependency before the order rather than on the day of installation.
Match the uplink module and transceiver to the platform, the measured span and the fibre already installed, and order them on the same line.
Photograph the sealed carton, reconcile the serial against the list supplied before shipment, then open and confirm the unit matches the label.
Power the unit, capture the software version and the port or drive inventory, and record it while the unit is still accessible.
Register the support contract under the end user name so the entitlement sits with the organisation that owns the outage.
Huawei OSX010000 is a 10G Optical Transceiver. It's a Single-mode Module. The published specification for OSX010000 lists a published transmission spe
Huawei SFP-25G-SR Module adopts hot-swappable SFP28 package, working wavelength is 850nm, it is a full-duplex transceiver module. Its maximum speed is
Huawei SFP-GE-LX-SM1310 is Optical Transceiver. It's a Single-mode Module. It is supplied new factory sealed, with the serial list issued before shipm
Top of rack switching, compute and storage delivered in the phased increments a cabinet build actually consumes.
Access, distribution and wireless supplied to one standard so every closet in every building behaves the same way.
A cabinet is commissioned as a unit, so it should be supplied as one. Switches, optics, rails and power leads belong in the same consignment.
Wireless projects are rarely stopped by the access point. They are stopped by a mount, a PoE class or a licence count that nobody confirmed before the order went out.
The tender required a firm price and date at submission, months before any award, across a bill of materials of several hundred lines
A Catalyst part number encodes the port count, the port type, the uplink arrangement and the software tier. Misreading one character changes what arrives.
Coding, fibre type, reach and connector are four independent decisions, and any one of them can stop a link coming up.
Five decisions set the part number. Getting them in the right order prevents most of the changes that happen late in a project.
Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.
Yes. Serials are issued before shipment so you can check them on the manufacturer portal while the goods are still with us.
Availability is confirmed in writing per line at quotation rather than as a project average, because one late line is what moves an installation date.
12 months replacement as standard. A vendor support contract is available separately and is registered under the end user name.
The published transmission speed is GE. Full port and performance specifications are issued with the quotation against the current datasheet revision.
The published figure is 850 nm. Rated reach assumes clean connectors and limited patch points, so leave margin against the measured span rather than designing to the maximum.
Yes. Consignments go worldwide by courier or freight from Hong Kong, with the routing chosen against the destination clearance regime and your deadline.
Yes. Consignments can be released directly to an end customer address under your own documentation.
Send the quantity and destination country. Availability and lead time come back in writing, with the serial list before shipment.