Misting and Fog System Supply
Nozzles, fittings and tube for low and high pressure misting lines, supplied as parts rather than as a sealed black box.
The Situation
Why Buyers Come to Us With This
Cooling and humidification jobs are usually installed by a contractor who wants the nozzle and fitting parts, not a packaged unit. The failure modes are always the same: heads that drip when the pump stops, heads that block on hard water, and spacing that wets the floor instead of cooling the air.
Step by Step
How the Work Runs
Set the Duty
Cooling, humidification and fog effect need different droplet sizes.
We match the range, from low pressure heads to the high pressure anti drip fine fog nozzles, to what the space actually needs.
Choose the Head
A dripping head marks the floor and wastes water after shutdown.
The high pressure MFD range carries anti drop equipment for exactly this failure.
Plan the Line
Nozzles at the far end starve when the line is undersized.
Spacing and line layout are set against the pressure available at the last head.
Fittings and Tube
Mixed fittings on a high pressure line are the first thing to leak.
Fittings and tube come from the same accessories range as the heads.
Water Quality
Hard water closes a fine orifice quickly.
We advise filtration and head choice against the water you actually have.
What You Get
Deliverables
- Low and high pressure misting heads including plastic bodies
- Anti drip heads for lines that stop and start
- Fittings and tube from the same range
- Advice on spacing and filtration for the water on site
Ranges Involved
Products This Route Draws On
Products
Typical Parts Supplied This Way
MFD High Pressure Anti Drip Misting Nozzle
View specification
High Pressure Nozzle with Filter
View specification
High Pressure SS Misting Nozzle
View specification
Low Pressure SS Misting Nozzle
View specification
Push Lock Low Pressure Misting Nozzle
View specification
Misting Nozzle with Fitting
View specification
Misting Nozzle
View specification
LN Misting Nozzle
View specification
Related Guides
Useful Background
Other Routes
Other Ways We Work
Questions Buyers Ask
Misting and Fog System Supply Questions
How long does misting and fog system supply normally take?
The engineering answer usually comes back within 6 hours because that is the stated inquiry response. Where a sample is needed, samples can be ready within 10 days.
Do I need a drawing to start?
No. Photographs of the existing part against a rule, the thread standard and a description of the duty are enough to begin. A drawing shortens the process where you have one.
What is the smallest order you will take on this route?
Small volume orders are accepted. A single position on a header is a normal first order, and trial samples can be sent free of charge.
What guarantee comes with the parts?
The product listings state a 3 month quality guarantee, and every product is tested before it is packed.
Start Misting and Fog System Supply With One Email
Describe the duty and attach photographs of the existing part. Inquiries are answered within 6 hours.