Misting Nozzle
Misting Nozzle
A misting nozzle produces a fine, evenly distributed fog to cool air, humidify space, or reduce dust in industrial environments. This CNSS misting nozzle range is designed for low and high pressure applications where a consistent, non-drip spray is required across a wide area. The nozzle body is constructed from materials suitable for continuous operation in demanding conditions, with a focus on reliable performance in outdoor cooling, greenhouse climate control, and livestock barn ventilation systems.
No published specification table exists for this listing. Send the duty and the thread on your header and we will confirm the size, pattern and material by email.
Key Benefits
What This Nozzle Gives You
- Produces a fine, uniform fog suitable for air cooling and humidity control without wetting surfaces
- Stainless steel construction resists corrosion in outdoor and high moisture environments
- Knurled collar allows secure hand-tightening during installation
- Hex fitting enables easy tool-based adjustment and alignment
- Designed for both low and high pressure misting systems with consistent droplet distribution
- Free trial samples available to test performance before full deployment
Application Scenarios
Where It Is Installed
- Outdoor cooling systems in warehouses or loading docks where air temperature must be reduced without creating wet floors
- Greenhouse climate control systems requiring even humidity distribution across plant rows
- Livestock barns where misting reduces dust and improves animal comfort during hot weather
- Industrial cleaning areas where fine mist reduces airborne particulates without overspray
- Misting lines in textile processing where moisture must be added without soaking the material
Who It Is For
Buyers Who Specify It
- Maintenance managers specifying nozzles for existing misting systems in large facilities
- HVAC and environmental engineers designing fog-based cooling or humidification systems
- Farm and greenhouse operators replacing worn nozzles in irrigation or climate control setups
- OEMs integrating misting nozzles into larger industrial equipment or cooling units
- Facility managers upgrading to low maintenance, drip-free misting technology
Problems It Solves
What It Fixes on the Line
- Uneven fog distribution that leaves dry or overly wet zones in a cooling or humidification zone
- Dripping or leaking nozzles that create puddles and increase maintenance downtime
- Corrosion of brass or plastic nozzles in outdoor or high humidity installations
- Nozzle clogging from particulates in recirculated water or untreated supply lines
- Inconsistent spray patterns due to loose or poorly aligned fittings on the header
Technical Features
How It Is Built
- One piece stainless steel construction with no internal parts to loosen or wear
- Knurled collar for secure hand-tightening during installation
- Hex fitting allows tool-based alignment and adjustment
- Mesh filter integrated into the tank vent cap design to prevent debris entry
- Designed for both low and high pressure misting systems with consistent output
- Nozzle body and fitting are matched to ensure a tight seal under pressure
Materials
Body Materials and Where Each One Suits
- Stainless steel for long life in outdoor, high moisture, or corrosive environments
- Body and fitting made from materials suitable for continuous operation in industrial settings
Manufacturing Process
How the Part Is Made
- Material selection based on the duty environment described by the customer
- Machining of the nozzle body and fitting
- Inspection of orifice and spray pattern
- Assembly with integrated mesh filter
- Packaging and transportation
Quality Control
What Is Checked Before It Ships
- Raw material is selected from brass, 303 stainless steel, 304 stainless steel, and 316 stainless steel
- Every process from material selection to transportation is controlled
- Every product is tested before it ships
- A 3 month quality guarantee is stated on the product listing
Customization
What Can Be Changed to Suit You
- Standard and non-standard nozzles can be made to customer drawing
- OEM orders accepted including customer marking
- Small volume orders accepted for trial installations
- Samples can be ready within 10 days
- Trial samples can be sent free of charge
Comparison
How It Compares With the Alternatives
| Full cone nozzle | A full cone provides a circular spray pattern ideal for tank filling or gas cooling, but it is less effective than a misting nozzle for spreading fog over a wide horizontal area |
|---|---|
| Hollow cone nozzle | A hollow cone delivers finer droplets in a ring pattern, better for gas scrubbing, but it does not produce the even horizontal fog layer required for cooling or humidification |
| Flat fan nozzle | A flat fan creates a linear spray useful for surface washing, but it cannot distribute mist evenly across a large open space like a misting nozzle can |
| Spiral nozzle | A spiral nozzle is designed to pass solids without clogging, but its conical spray pattern is not suited for uniform horizontal fog coverage |
Use Guide
Fitting and Running It
- Confirm the required pressure range and target area before selecting a nozzle
- Ensure the mesh filter is installed and clean to prevent clogging in the orifice
- Align the nozzle so the spray direction covers the intended zone without overlap or gaps
- Use the knurled collar to tighten by hand and avoid over-tightening with tools
- Inspect the nozzle regularly for debris buildup, especially when using recirculated water
- Replace the nozzle if fog pattern becomes uneven or dripping occurs
Questions Buyers Ask
Misting Nozzle Questions
What materials are used in the misting nozzle?
The misting nozzle is made from stainless steel, selected from brass, 303 stainless steel, 304 stainless steel, and 316 stainless steel, depending on the duty environment.
Can I get a sample before placing a production order?
Yes. Trial samples can be sent free of charge and are available within 10 days.
Do you accept small volume orders and OEM customization?
Yes. Small volume orders are accepted, and standard or non-standard nozzles can be made to your drawing under an OEM order.
What is the quality guarantee for this nozzle?
A 3 month quality guarantee is stated on the product listing. If a nozzle fails in service, send us the nozzle photo and service conditions by email for assessment.
What are the payment terms?
The product listing states T/T 100% in advance. Send the model, quantity, and destination port by email, and we will confirm the terms for your order.
Is the nozzle compatible with low and high pressure systems?
Yes. The misting nozzle is designed for both low and high pressure misting systems, with consistent droplet distribution across the operating range.
How do I prevent clogging in the nozzle?
Install the mesh filter as shown in the product images. Clean the filter regularly, especially when using recirculated or untreated water.
Related Products
Others in the Misting Nozzle
Go Deeper
Industries Guides and Ways to Order
Ask About Misting Nozzle
Send the liquid, the pressure at the nozzle and the thread on your header. Trial samples can be sent free of charge and samples can be ready within 10 days.