LP Misting Nozzle
Push Lock Low Pressure Misting Nozzle
A push lock low pressure misting nozzle delivers a fine, evenly distributed mist at low operating pressure, which is required when a consistent fog layer must be maintained over a large area without high energy input. This CNSS nozzle is designed for applications where water conservation, low noise, and uniform coverage are priorities, such as in greenhouse humidification, livestock cooling, or outdoor misting systems. The push lock connection allows quick installation and removal without tools, reducing downtime during maintenance or nozzle replacement.
No published specification table exists for this listing. Send the duty and the thread on your header and we will confirm the size, pattern and material by email.
Key Benefits
What This Nozzle Gives You
- Push lock connection enables tool-free installation and removal
- Low pressure operation reduces energy and pump requirements
- Fine mist pattern ensures even coverage over large or irregular surfaces
- Nozzle body and fitting are designed for repeated disassembly without damage
- Suitable for continuous or intermittent operation in humid or outdoor environments
- Reduces water waste compared to high pressure systems with similar coverage
Application Scenarios
Where It Is Installed
- Greenhouse environments where consistent humidity is needed without wetting plant foliage
- Livestock barns requiring cooling without excessive moisture buildup
- Outdoor patios and terraces using misting systems for temperature reduction
- Textile processing areas needing gentle humidification during drying or storage
- Misting lines in industrial cooling zones where low noise and low pressure are required
Who It Is For
Buyers Who Specify It
- Maintenance teams managing misting systems in agricultural or livestock facilities
- Facility managers installing or upgrading outdoor cooling systems
- OEMs building misting systems for commercial or industrial use
- Plant engineers replacing worn nozzles in low pressure misting lines
- Distributors stocking nozzles for misting system integrators
Problems It Solves
What It Fixes on the Line
- High water consumption from poorly controlled misting systems
- Nozzle failure due to improper or damaged thread connections
- Downtime caused by slow or tool-dependent nozzle replacement
- Inconsistent mist coverage from misaligned or loose nozzles
- Noise and vibration from high pressure systems in sensitive environments
Technical Features
How It Is Built
- Push lock connection allows tool-free assembly and disassembly
- Designed for low pressure operation with stable mist output
- T-shaped fitting with blue collar and knurled metal component for secure connection
- No internal parts that can loosen or wear over time
- Body and fitting geometry prevents misalignment during installation
- Suitable for use with standard low pressure water supply lines
Materials
Body Materials and Where Each One Suits
Manufacturing Process
How the Part Is Made
- Material selection based on the intended duty and environment
- Machining of the nozzle body and fitting components
- Inspection of connection geometry and push lock function
- Packaging for protection during transit
- Transportation under controlled conditions
Quality Control
What Is Checked Before It Ships
- Raw material is selected from brass, 303 stainless steel, 304 stainless steel, and 316 stainless steel
- Every process from material selection to transportation is controlled
- Every product is tested before it ships
- A 3 month quality guarantee is stated on the product listing
Customization
What Can Be Changed to Suit You
- Standard and non-standard parts can be customised to drawing
- OEM orders accepted including customer marking
- Small volume orders accepted for trial or replacement use
- Samples can be ready within 10 days
- Trial samples can be sent free of charge
Comparison
How It Compares With the Alternatives
| High pressure misting nozzle | High pressure systems require pumps and filters, while this low pressure version operates on standard water supply and uses less energy |
|---|---|
| Threaded connection nozzle | A threaded nozzle requires tools and can loosen over time; the push lock design allows faster replacement and better retention |
| Full cone nozzle | A full cone covers a circular area, while the low pressure misting nozzle is designed for linear or wide-area coverage with minimal water use |
| Air atomizing nozzle | Air atomizing requires compressed air and is more complex; this nozzle uses only water at low pressure for simple misting |
Use Guide
Fitting and Running It
- Confirm the required mist coverage area and operating pressure before selecting the nozzle
- Ensure the push lock connection is fully seated to prevent leakage
- Inspect the connection and nozzle body regularly for wear or debris
- Clean the nozzle if mist pattern becomes uneven or flow drops
- Replace the nozzle if the push lock mechanism fails to hold securely
Questions Buyers Ask
Push Lock Low Pressure Misting Nozzle Questions
What is the operating pressure range for this nozzle?
The push lock low pressure misting nozzle is designed for low pressure operation. The exact pressure range is confirmed on enquiry based on the application and desired mist pattern.
Can I get a sample before placing a production order?
Yes. Trial samples can be sent free of charge and samples can be ready within 10 days.
Do you accept OEM orders and custom designs?
Yes. Standard and non-standard nozzles can be made to your drawing under an OEM order, including custom marking.
What materials are available for this nozzle?
The nozzle body is available in brass, 303 stainless steel, 304 stainless steel, and 316 stainless steel, selected based on the application duty.
What is the lead time for a sample?
Samples can be ready within 10 days after the order is placed.
What happens if a nozzle fails in service?
A 3 month quality guarantee is given on the product. Send us the nozzle photo and the service conditions by email and we will assess the failure.
What are your payment terms?
The product listings state T/T 100% in advance. Send the model, quantity and destination port by email and we will confirm the terms for your order.
Related Products
Others in the LP Misting Nozzle
Go Deeper
Industries Guides and Ways to Order
Ask About Push Lock Low Pressure Misting Nozzle
Send the liquid, the pressure at the nozzle and the thread on your header. Trial samples can be sent free of charge and samples can be ready within 10 days.