Home
Products
Peripheral Squaring Wheels
Metal Bond Peripheral Squaring Wheels

Peripheral Squaring Wheels

Metal Bond Peripheral Squaring Wheels

Name: Metal Bond Peripheral Squaring Wheels
Brand: Bello Diamond Tools
SKU: TA180PS1

Rough squaring on glazed and porcelain tile edges

Rough squaring sets up the size that the fine wheels then hold, and it is where most of the material comes off. Item IDs TA180PS1-TA200PS3 are silver-welded for continuous duty.

Request A Quote Talk To An Engineer

Ceramic Tile
TA180PS1 to TA200PS3
7 sizes listed

Metal Bond Peripheral Squaring Wheels — Rough squaring on glazed and porcelain tile edges

Product Overview

What Metal Bond Peripheral Squaring Wheels Is For

The plant specification sheet describes this tool as used to make squaring on glaze floor tiles edges, and is also used to make rough squaring on polished porcelain tiles. That is exactly where it belongs, and where it stops.

The specification table lists 7 sizes, Item IDs TA180PS1 to TA200PS3.

Metal Bond Peripheral Squaring Wheels is the whole of the Peripheral Squaring Wheels category, so specification work happens inside the item rather than by picking between siblings.

Technical Features

How It Is Built

Manufacturing route

Silver welded. This is what holds the diamond in place under working load.

Bond selected per enquiry

We do not ship a single general-purpose bond. Please tell us your tiles and working condition, we will choose the best bonding for you.

Item ID series

Ordering runs on the TA180PS1 to TA200PS3 series, so repeat orders return the same specification.

Sizes beyond the standard list

Other sizes are available upon customer's request.

Export handling

Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.

Specifications

Sizes and Item IDs

Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.

Metal Bond Peripheral Squaring Wheels — Specification table
Item ID	Diameter	Segment	Grit size
mm	width (mm)	height (mm)
TA180PS1	180	9	12	46#, 60#, 70#, 80#, 100#, 120#, 140#
TA180PS2	180	10	10
TA180PS3	180	10	14
TA200PS1	200	9	12
TA200PS2	200	10	10
TA200PS3	200	10	14

Product family: Ceramic Tile
Category: Peripheral Squaring Wheels
Manufacturing route: Silver welded.
Bond: Please tell us your tiles and working condition, we will choose the best bonding for you.
Country of manufacture: China (Shangqiu, Henan)
Private label: Laser marking on the steel core available for OEM orders

Who It Is For

Glazed floor tile lines
Polished porcelain plants doing rough squaring

Every one of these buyers gets the same first question from us: what material, what machine, what size.

The Problem It Solves

Tile size tolerance is set at the squaring station, and a worn wheel loses it.

Metal Bond Peripheral Squaring Wheels is the answer to that in the peripheral squaring wheels part of the range: rough squaring on glazed and porcelain tile edges.

Used to make squaring on glaze floor tiles edges, and is also used to make rough squaring on polished porcelain tiles.

Key Benefits

Why This Version and Not Another

Silver-welded segments for continuous squaring duty

Applies across the peripheral squaring wheels series, including this item.

Dia 180-200 mm in graded specifications

Part of how this category is built.

Used for rough squaring ahead of the resin bond fine wheels

Part of how this category is built.

Use Guide

Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.

Compared With the Rest of the Category

Peripheral Squaring Wheels holds 1 item in the programme. The difference between them is geometry and construction, not marketing.

Continuous Rim Blade for Ceramics — chip-free cutting on porcelain and glazed tiles
Segmented Diamond Blade for Ceramics — laser-cut slots for faster tile cutting
Continuous Rim Diamond Cylinderical Wheels — continuous rim rough grinding after calibration
Segmented Diamond Cylinderical Wheels — segmented cylindrical wheel for faster removal
Magnesium Oxide Bond Silicon Carbide Abrasive — magnesium oxide bond for graded tile grinding
Resin Bond Silicon Carbide Abrasive — resin bond abrasive for matt tile finishes

See the whole peripheral squaring wheels category

Questions Buyers Ask

Metal Bond Peripheral Squaring Wheels — Questions We Get Asked

What sizes does Metal Bond Peripheral Squaring Wheels come in

The standard programme lists 7 sizes on this page, Item IDs TA180PS1 to TA200PS3. Other sizes are available upon customer's request.

Which bond will you supply for my material

The bond is set per enquiry rather than per catalogue number. Please tell us your tiles and working condition, we will choose the best bonding for you.

What do you need to quote Metal Bond Peripheral Squaring Wheels

The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.

What is the lead time and minimum order for Metal Bond Peripheral Squaring Wheels

Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)