Home
Products
Diamond Cylinderical Wheels
Continuous Rim Diamond Cylinderical Wheels

Diamond Cylinderical Wheels

Continuous Rim Diamond Cylinderical Wheels

Name: Continuous Rim Diamond Cylinderical Wheels
Brand: Bello Diamond Tools
SKU: TA150CCW1

Continuous rim rough grinding after calibration

Sitting right after the calibrating roller, this wheel decides how much work the polishing heads still face. Item IDs TA150CCW1-TA200CCW2 are hot-press sintered.

Request A Quote Talk To An Engineer

Ceramic Tile
TA150CCW1 to TA200CCW3
7 sizes listed

Continuous Rim Diamond Cylinderical Wheels — Continuous rim rough grinding after calibration

Product Overview

What Continuous Rim Diamond Cylinderical Wheels Is For

The plant specification sheet describes this tool as used to make rough grinding after diamond calibrating roller on ceramic tiles surface. That is exactly where it belongs, and where it stops.

The specification table lists 7 sizes, Item IDs TA150CCW1 to TA200CCW3.

Inside Diamond Cylinderical Wheels there are 2 items to choose between. This one is the continuous rim rough grinding after calibration option — the comparison further down this page sets it against the others.

Technical Features

How It Is Built

Manufacturing route

Hot press sintered. This is what holds the diamond in place under working load.

Bond selected per enquiry

We do not ship a single general-purpose bond. Please tell us your tiles and working condition, we will choose the best bonding for you.

Item ID series

Ordering runs on the TA150CCW1 to TA200CCW3 series, so repeat orders return the same specification.

Sizes beyond the standard list

Other sizes are available upon customer's request.

Export handling

Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.

Specifications

Sizes and Item IDs

Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.

Continuous Rim Diamond Cylinderical Wheels — Specification table
Item ID	Diameter	Segment	Grit size
mm	length (mm)	height (mm)
TA150CCW1	150	90	10	60#, 80#, 100#, 120#, 140#
TA150CCW2	150	40	10
TA180CCW1	180	60	10
TA200CCW1	200	58	10
TA200CCW2	200	40	10
TA200CCW3	200	24	10

Product family: Ceramic Tile
Category: Diamond Cylinderical Wheels
Manufacturing route: Hot press sintered.
Bond: Please tell us your tiles and working condition, we will choose the best bonding for you.
Country of manufacture: China (Shangqiu, Henan)
Private label: Laser marking on the steel core available for OEM orders

Who It Is For

Porcelain tile polishing lines
Tile plants running calibrating and polishing in sequence

Every one of these buyers gets the same first question from us: what material, what machine, what size.

The Problem It Solves

The step after calibration decides how much work the polishing heads still have to do.

Continuous Rim Diamond Cylinderical Wheels is the answer to that in the diamond cylinderical wheels part of the range: continuous rim rough grinding after calibration.

Used to make rough grinding after diamond calibrating roller on ceramic tiles surface.

Key Benefits

Why This Version and Not Another

Continuous rim and segmented versions for different stock removal

Applies across the diamond cylinderical wheels series, including this item.

Hot-press sintered or silver-welded construction

Part of how this category is built.

Dia 130-208 mm to fit standard line heads

Part of how this category is built.

Use Guide

Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.

Compared With the Rest of the Category

Diamond Cylinderical Wheels holds 2 items in the programme. The difference between them is geometry and construction, not marketing.

Segmented Diamond Cylinderical Wheels — segmented cylindrical wheel for faster removal
Continuous Rim Blade for Ceramics — chip-free cutting on porcelain and glazed tiles
Segmented Diamond Blade for Ceramics — laser-cut slots for faster tile cutting
Magnesium Oxide Bond Silicon Carbide Abrasive — magnesium oxide bond for graded tile grinding
Resin Bond Silicon Carbide Abrasive — resin bond abrasive for matt tile finishes
Metal Bond Diamond Chamfering Wheels — metal bond chamfering for hard tile edges

See the whole diamond cylinderical wheels category

Questions Buyers Ask

Continuous Rim Diamond Cylinderical Wheels — Questions We Get Asked

What sizes does Continuous Rim Diamond Cylinderical Wheels come in

The standard programme lists 7 sizes on this page, Item IDs TA150CCW1 to TA200CCW3. Other sizes are available upon customer's request.

Which bond will you supply for my material

The bond is set per enquiry rather than per catalogue number. Please tell us your tiles and working condition, we will choose the best bonding for you.

What do you need to quote Continuous Rim Diamond Cylinderical Wheels

The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.

What is the lead time and minimum order for Continuous Rim Diamond Cylinderical Wheels

Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)