- Home
- Products
- Diamond Chamfering Wheels
- Resin Bond Diamond Chamfering Wheels
Resin Bond Diamond Chamfering Wheels
Resin bond chamfering on an aluminium base
Resin bond on an aluminium base finishes the chamfer smoothly after the metal bond wheel has taken the stock off. Item IDs TA125Y6-TA130Y6 fit the same stations.
What Resin Bond Diamond Chamfering Wheels Is For
The plant specification sheet describes this tool as used to make chamfering on polished porcelain tiles, wearable ceramic tiles with aluminum base. That is exactly where it belongs, and where it stops.
The specification table lists 9 sizes, Item IDs TA100RCA to TA150RCA.
Inside Diamond Chamfering Wheels there are 2 items to choose between. This one is the resin bond chamfering on an aluminium base option — the comparison further down this page sets it against the others.
How It Is Built
Manufacturing route
Hot press sintered, resin bond. This is what holds the diamond in place under working load.
Bond selected per enquiry
We do not ship a single general-purpose bond. Please tell us your tiles and working condition, we will choose the best bonding for you.
Item ID series
Ordering runs on the TA100RCA to TA150RCA series, so repeat orders return the same specification.
Sizes beyond the standard list
Other sizes are available upon customer's request.
Export handling
Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.
Sizes and Item IDs
Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.
| Item ID | Diameter | Segment | Grit size | Type | |
|---|---|---|---|---|---|
| mm | thickness (mm) | height (mm) | |||
| TA130Y3 | 130 | 40 | 10/12 | 230#, 400#, 600#, 800# | Y3 |
| TA125Y6 | 125 | 25 | 15/20 | Y6 | |
| TA130Y6 | 130 | 40 | 15/20 | Y6 |
| Item ID | Diameter | Segment | Grit size | Base material | |
|---|---|---|---|---|---|
| mm | thickness (mm) | height (mm) | |||
| TA100RCA | 100 | 40 | 15/20 | 230#, 270#, 320#, 400#, 600#, 800# | Aluminum |
| TA125RCA | 125 | 25 | 15/20 | ||
| TA130RCA | 130 | 40 | 10/20 | ||
| TA150RCA | 150 | 40 | 10/20 |
- Product family
- Ceramic Tile
- Category
- Diamond Chamfering Wheels
- Manufacturing route
- Hot press sintered, resin bond.
- Bond
- Please tell us your tiles and working condition, we will choose the best bonding for you.
- Country of manufacture
- China (Shangqiu, Henan)
- Private label
- Laser marking on the steel core available for OEM orders
Who It Is For
- Porcelain tile production lines
- Tile processors finishing edges
Every one of these buyers gets the same first question from us: what material, what machine, what size.
The Problem It Solves
An unchamfered tile edge chips in the box and in the customer's hallway.
Resin Bond Diamond Chamfering Wheels is the answer to that in the diamond chamfering wheels part of the range: resin bond chamfering on an aluminium base.
Used to make chamfering on polished porcelain tiles, wearable ceramic tiles with aluminum base.
Why This Version and Not Another
Metal bond for stock removal and resin bond for the finish chamfer
Applies across the diamond chamfering wheels series, including this item.
Aluminium-base version for the resin series
Part of how this category is built.
TA120-TA130 sizes fit standard chamfering heads
Part of how this category is built.
Use Guide
Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.
Compared With the Rest of the Category
Diamond Chamfering Wheels holds 2 items in the programme. The difference between them is geometry and construction, not marketing.
- Metal Bond Diamond Chamfering Wheels — metal bond chamfering for hard tile edges
- Continuous Rim Blade for Ceramics — chip-free cutting on porcelain and glazed tiles
- Segmented Diamond Blade for Ceramics — laser-cut slots for faster tile cutting
- Continuous Rim Diamond Cylinderical Wheels — continuous rim rough grinding after calibration
- Segmented Diamond Cylinderical Wheels — segmented cylindrical wheel for faster removal
- Magnesium Oxide Bond Silicon Carbide Abrasive — magnesium oxide bond for graded tile grinding
Resin Bond Diamond Chamfering Wheels — Questions We Get Asked
What sizes does Resin Bond Diamond Chamfering Wheels come in
The standard programme lists 9 sizes on this page, Item IDs TA100RCA to TA150RCA. Other sizes are available upon customer's request.
Which bond will you supply for my material
The bond is set per enquiry rather than per catalogue number. Please tell us your tiles and working condition, we will choose the best bonding for you.
What do you need to quote Resin Bond Diamond Chamfering Wheels
The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.
What is the lead time and minimum order for Resin Bond Diamond Chamfering Wheels
Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)
Others in the Same Part of the Range
Metal Bond Diamond Chamfering Wheels
Metal bond chamfering for hard tile edges
View specifications →
Continuous Rim Blade for Ceramics
Chip-free cutting on porcelain and glazed tiles
View specifications →
Segmented Diamond Blade for Ceramics
Laser-cut slots for faster tile cutting
View specifications →
Continuous Rim Diamond Cylinderical Wheels
Continuous rim rough grinding after calibration
View specifications →
Segmented Diamond Cylinderical Wheels
Segmented cylindrical wheel for faster removal
View specifications →
Magnesium Oxide Bond Silicon Carbide Abrasive
Magnesium oxide bond for graded tile grinding
View specifications →
Resin Bond Silicon Carbide Abrasive
Resin bond abrasive for matt tile finishes
View specifications →
Diamond Fickert for Ceramic Tile
Diamond fickert replacing silicon carbide on tile lines
View specifications →Related Technical Guides
Get a quote for Resin Bond Diamond Chamfering Wheels
Send the material, machine and size. You will get a specification and a price, not a catalogue page.