Home
Products
Silicon Carbide Abrasive
Magnesium Oxide Bond Silicon Carbide Abrasive

Silicon Carbide Abrasive

Magnesium Oxide Bond Silicon Carbide Abrasive

Name: Magnesium Oxide Bond Silicon Carbide Abrasive
Brand: Bello Diamond Tools
SKU: TA140MOA

Magnesium oxide bond for graded tile grinding

The magnesium oxide bond covers the rough, medium and fine grinding ladder on tile surfaces where diamond would be too aggressive. Item IDs TA140MOA and TA170MOA are hot-pressed.

Request A Quote Talk To An Engineer

Ceramic Tile
TA140MOA to TA170MOA
2 sizes listed

Magnesium Oxide Bond Silicon Carbide Abrasive — Magnesium oxide bond for graded tile grinding

Product Overview

What Magnesium Oxide Bond Silicon Carbide Abrasive Is For

The plant specification sheet describes this tool as used to make rough, medium and fine grinding and polishing on ceramic tiles surface. That is exactly where it belongs, and where it stops.

The specification table lists 2 sizes, Item IDs TA140MOA to TA170MOA.

Inside Silicon Carbide Abrasive there are 2 items to choose between. This one is the magnesium oxide bond for graded tile grinding option — the comparison further down this page sets it against the others.

Technical Features

How It Is Built

Manufacturing route

Hot press. This is what holds the diamond in place under working load.

Bond selected per enquiry

We do not ship a single general-purpose bond. Magnesium oxide bond.

Item ID series

Ordering runs on the TA140MOA to TA170MOA series, so repeat orders return the same specification.

Sizes beyond the standard list

Other sizes are available upon customer's request.

Export handling

Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.

Specifications

Sizes and Item IDs

Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.

Magnesium Oxide Bond Silicon Carbide Abrasive — Specification table
Item ID	Type	Grit size
TA140MOA	T1 L140	24#, 36#, 46#, 80#, 100#, 120#, 170#, 240#, 320#, 400#, 500#, 600#, 800#, 1000#, 1200#, 1500#, 1800#, 2500#
TA170MOA	T2 L170

Product family: Ceramic Tile
Category: Silicon Carbide Abrasive
Manufacturing route: Hot press.
Bond: Magnesium oxide bond.
Country of manufacture: China (Shangqiu, Henan)
Private label: Laser marking on the steel core available for OEM orders

Who It Is For

Tile plants producing matt and honed finishes
Polishing lines with mixed abrasive sequences

Every one of these buyers gets the same first question from us: what material, what machine, what size.

The Problem It Solves

Not every tile finish should be reached with diamond; matt effects need an abrasive that gives way.

Magnesium Oxide Bond Silicon Carbide Abrasive is the answer to that in the silicon carbide abrasive part of the range: magnesium oxide bond for graded tile grinding.

Used to make rough, medium and fine grinding and polishing on ceramic tiles surface.

Key Benefits

Why This Version and Not Another

Magnesium oxide bond for the graded grinding ladder

Applies across the silicon carbide abrasive series, including this item.

Resin bond for matt-effect grinding

Part of how this category is built.

140 and 170 mm bases for standard line heads

Part of how this category is built.

Use Guide

Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.

Compared With the Rest of the Category

Silicon Carbide Abrasive holds 2 items in the programme. The difference between them is geometry and construction, not marketing.

Resin Bond Silicon Carbide Abrasive — resin bond abrasive for matt tile finishes
Continuous Rim Blade for Ceramics — chip-free cutting on porcelain and glazed tiles
Segmented Diamond Blade for Ceramics — laser-cut slots for faster tile cutting
Continuous Rim Diamond Cylinderical Wheels — continuous rim rough grinding after calibration
Segmented Diamond Cylinderical Wheels — segmented cylindrical wheel for faster removal
Metal Bond Diamond Chamfering Wheels — metal bond chamfering for hard tile edges

See the whole silicon carbide abrasive category

Questions Buyers Ask

Magnesium Oxide Bond Silicon Carbide Abrasive — Questions We Get Asked

What sizes does Magnesium Oxide Bond Silicon Carbide Abrasive come in

The standard programme lists 2 sizes on this page, Item IDs TA140MOA to TA170MOA. Other sizes are available upon customer's request.

Which bond will you supply for my material

The bond is set per enquiry rather than per catalogue number. Magnesium oxide bond.

What do you need to quote Magnesium Oxide Bond Silicon Carbide Abrasive

The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.

What is the lead time and minimum order for Magnesium Oxide Bond Silicon Carbide Abrasive

Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)