Home
Products
Diamond Cutting Blades
Continuous Rim Blade for Ceramics

Diamond Cutting Blades

Continuous Rim Blade for Ceramics

Name: Continuous Rim Blade for Ceramics
Brand: Bello Diamond Tools
SKU: TA105CR

Chip-free cutting on porcelain and glazed tiles

A closed rim is the only way to cut polished porcelain without picking the glaze off the edge. Item IDs TA105CR-TA350CR are hot-press sintered for tile plants cutting to format.

Request A Quote Talk To An Engineer

Ceramic Tile
TA105CR to TA400CR
12 sizes listed

Continuous Rim Blade for Ceramics — Chip-free cutting on porcelain and glazed tiles

Product Overview

What Continuous Rim Blade for Ceramics Is For

The plant specification sheet describes this tool as for smooth, fast and chip-free cutting ceramic tiles, porcelain tiles, glazed floor. That is exactly where it belongs, and where it stops.

The specification table lists 12 sizes, Item IDs TA105CR to TA400CR.

Inside Diamond Cutting Blades there are 2 items to choose between. This one is the chip-free cutting on porcelain and glazed tiles option — the comparison further down this page sets it against the others.

Technical Features

How It Is Built

Manufacturing route

Hot-press sintered. This is what holds the diamond in place under working load.

Bond selected per enquiry

We do not ship a single general-purpose bond. Please tell us your tiles and working condition, we will choose the best bonding for you.

Item ID series

Ordering runs on the TA105CR to TA400CR series, so repeat orders return the same specification.

Sizes beyond the standard list

Other sizes are available upon customer's request.

Export handling

Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.

Specifications

Sizes and Item IDs

Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.

Continuous Rim Blade for Ceramics — Specification table
Item ID	Diameter	Bore size	Segment	Grit size
mm	inch	mm	thickness (mm)	height (mm)
TA105CR	105	4	20	1.8	7	64#, 76#, 91#, 107#, 126#, 151#, 181#, 213#, 252#, 301#, 427#
TA115CR	115	4.5	20	1.8	7
TA125CR	125	5	20	1.8	7
TA150CR	150	6	22.23	2.0	7
TA180CR	180	7	22.23	2.0/2.2	7
TA200CR	200	8	22.23	2.0/2.2	7
TA230CR	230	9	22.23	2.2/2.4	7
TA250CR	250	10	60	2.0/2.2/2.4	10
TA300CR	300	12	60	2.0/2.2/2.4	10
TA350CR	350	14	60/50	2.0/2.2/2.4/2.6	10
TA400CR	400	16	75	2.2/2.4/2.6	10

Product family: Ceramic Tile
Category: Diamond Cutting Blades
Manufacturing route: Hot-press sintered.
Bond: Please tell us your tiles and working condition, we will choose the best bonding for you.
Country of manufacture: China (Shangqiu, Henan)
Private label: Laser marking on the steel core available for OEM orders

Who It Is For

Ceramic tile plants cutting to format
Tile processors making step and skirting pieces
Tile retailers cutting to order

Every one of these buyers gets the same first question from us: what material, what machine, what size.

The Problem It Solves

Chipped tile edges get rejected at the packing line, not at the saw.

Continuous Rim Blade for Ceramics is the answer to that in the diamond cutting blades part of the range: chip-free cutting on porcelain and glazed tiles.

For smooth, fast and chip-free cutting ceramic tiles, porcelain tiles, glazed floor.

Key Benefits

Why This Version and Not Another

Continuous rim for chip-free edges, segmented for speed on thick tiles

Applies across the diamond cutting blades series, including this item.

Hot-press sintered and silver-welded versions

Part of how this category is built.

Dia 105-450 mm across the two series

Part of how this category is built.

Use Guide

Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.

Compared With the Rest of the Category

Diamond Cutting Blades holds 2 items in the programme. The difference between them is geometry and construction, not marketing.

Segmented Diamond Blade for Ceramics — laser-cut slots for faster tile cutting
Continuous Rim Diamond Cylinderical Wheels — continuous rim rough grinding after calibration
Segmented Diamond Cylinderical Wheels — segmented cylindrical wheel for faster removal
Magnesium Oxide Bond Silicon Carbide Abrasive — magnesium oxide bond for graded tile grinding
Resin Bond Silicon Carbide Abrasive — resin bond abrasive for matt tile finishes
Metal Bond Diamond Chamfering Wheels — metal bond chamfering for hard tile edges

See the whole diamond cutting blades category

Questions Buyers Ask

Continuous Rim Blade for Ceramics — Questions We Get Asked

What sizes does Continuous Rim Blade for Ceramics come in

The standard programme lists 12 sizes on this page, Item IDs TA105CR to TA400CR. Other sizes are available upon customer's request.

Which bond will you supply for my material

The bond is set per enquiry rather than per catalogue number. Please tell us your tiles and working condition, we will choose the best bonding for you.

What do you need to quote Continuous Rim Blade for Ceramics

The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.

What is the lead time and minimum order for Continuous Rim Blade for Ceramics

Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)