- Home
- Construction and Demolition
Blades Core Bits and Grinding Tools for Concrete Work
Concrete work punishes tools in specific ways: rebar shocks the segment joint, green concrete undercuts the core, asphalt is soft and abrasive, and masonry dust packs the slot. The 25 products in this part of the programme are separated along exactly those lines.
What Goes Wrong and What Fixes It
Segments shear when the blade meets rebar
Laser welded joints are standard in the cured and reinforced concrete series for that reason.
Blades die in fresh slab
Green concrete is abrasive and cuts the core as much as the segment. The green concrete series carries special protection segments.
The blade stops cutting in brick dust
A wide U-slot keeps clearing where a narrow slot packs solid.
Coatings fail after grinding
Usually the surface profile was wrong. Ten cup wheel geometries cover everything from coating removal to a smooth finish.
Where the Tools Are Used
Road and slab sawing
Green concrete, cured reinforced concrete and asphalt blades from 300 to 1200 mm.
Wall sawing and openings
Wall saw blades from 500 to 1600 mm and diamond wire for geometry a blade cannot reach.
Deep and confined cutting
Ring saw blades that cut deeper than a standard blade of the same diameter.
Joint and crack work
Tuck point blades, crack chasers, U-slot and V-shape wave versions.
Drilling
Wet core bits from 25 to 350 mm and a dedicated dry series where water is not allowed.
Floor preparation
Cup wheels, floor grinding heads and discs for surface preparation before coating.
Construction and Demolition — 10 Categories
Diamond Grinding Cup Wheels
Cup wheels for concrete grinding and surface preparation
Browse category →
Tuck Point & Crack Chaser
Tuck point and crack chaser blades for concrete and masonry joints
Browse category →
Diamond Core Bits
Wet and dry core bits for concrete and asphalt drilling
Browse category →
Diamond Grinding Heads
Grinding heads and discs for floor grinding machines
Browse category →
Diamond Blades for Concrete
Laser-welded blades for green and cured reinforced concrete
Browse category →
Diamond Blades for Masonry
Wide U-slot blades for masonry and hard brick
Browse category →
Diamond Wire Saw
Diamond wire for concrete and brick wall cutting
Browse category →
Diamond Blades for Asphalt
Key-slot blades for fast asphalt cutting
Browse category →
Ring Saw Diamond Blades
Ring saw blades for deep cuts with a small machine
Browse category →
Wall Saw Diamond Blades
Wall saw blades for concrete and brick wall openings
Browse category →Where Most Enquiries Start
Arrow Segment Diamond Grinding Cup Wheel
Arrow segments for fast concrete removal
View specifications →
Continuous Rim Diamond Grinding Wheel with Slot
Slotted rim balancing finish and cooling
View specifications →
Continuous Rim Diamond Grinding Wheel
Continuous rim for smoothing concrete surfaces
View specifications →
Double Row Diamond Grinding Cup Wheel
Double row wheel for long removal runs
View specifications →
L Segment Diamond Grinding Cup Wheel
L segments for edge work on concrete floors
View specifications →
Single Row Diamond Grinding Cup Wheel
Single row wheel for controlled concrete grinding
View specifications →
Straight Turbo Diamond Grinding Wheel
Straight turbo profile for even concrete grinding
View specifications →
T Segment Diamond Grinding Cup Wheel
T segments for grinding into concrete corners
View specifications →
Turbo Wave Diamond Grinding Cup Wheel
Wave turbo wheel for cooler concrete grinding
View specifications →
Wave Turbo Diamond Grinding Cup Wheel
Wave segments for long grinding passes
View specifications →
Laser Welded Crack Chaser
Crack chaser for opening cracks before filling
View specifications →
Laser Welded Tuck Point
Laser-welded tuck point for clean joint width
View specifications →How We Handle These Orders
Specification first
Material, machine, size and quantity decide the bond. Every quote starts there.
Sequence supply
Stations that depend on each other are quoted together, not item by item.
Re-tipping
Loose segments for 200-3500 mm blades, gang saws and multi saws.
Export packing
Shipped from Shangqiu, Henan on standard export terms.
Related Solutions
Construction and Demolition — Questions From Buyers
Which blade for a slab with heavy rebar
The cured and reinforced concrete series. Tell us the reinforcement density so we can set the matrix hardness.
Can one blade cover asphalt over concrete
For mixed layers we specify a combination bond. Send the layer thicknesses.
Do you supply dry cutting tools
Yes — both the vacuum brazed programme for mixed material and the dry core bit series for concrete and asphalt.
Tooling for construction and demolition
Send your station list or your current tool and the material you process.