One-Stop ServiceProduct Design
Functionality, aesthetics and manufacturability treated as one problem
Wisdom Industrial · since 2012
Overview
Design work that holds three things together at once: whether the product works, whether it looks like something people want, and whether it can actually be made. Designs that only satisfy the first two arrive at the tool room as a negotiation, and the tool room usually wins.
Problems
What This Fixes
- Designs that are elegant on screen and impossible to mould
- Aesthetic decisions that quietly add a secondary operation to every unit
- Draft, wall thickness and parting lines fixed by the toolmaker rather than the designer
- A design partner with no access to the factory that will build it
Benefits
What You Get
- Innovative and practical solutions aligned to your specific requirements
- Functionality, aesthetics and manufacturability addressed in the same review
- Designers working inside a group that runs tooling, moulding and machining
- Design decisions carried straight into DFM and Moldflow rather than re-explained
Who For
Suited To
- Companies with a product requirement but no industrial design resource
- Teams whose current design cannot be manufactured at the target cost
- Buyers who want design and manufacture answerable to the same contract
Scenarios
Typical Jobs
- A housing redesigned to remove a secondary finishing operation
- A product refresh that has to reuse existing internal components
- A design adapted for a different manufacturing process
Technical
How It Runs
- Experienced design team producing practical, manufacturable solutions
- Design reviewed against the processes available inside the group
- Direct handover into DFM reporting and mould flow analysis
- Post-treatment options considered at design stage, not bolted on later
At A Glance
Specification
Everything below is published because it is what an engineer checks before sending a drawing. Anything not listed is confirmed in the quotation rather than guessed at here.
| Capability | Product Design |
|---|---|
| Group company | Wisdom Industrial, established 2012 |
| Category | One-Stop Product Development |
| Location | Shenzhen, Guangdong, China |
| Certification | ISO 9001:2015 |
| Post-treatment | Plating, Anodizing, Painting, UV printing, Screen printing |
| Response time | Engineer replies within 24 hours |
Order Process
How This Job Would Run
The same eight stages apply whether the order is a single tool or a production programme.
Request A Quote
Send the part drawing or 3D file by email. An engineer comes back within 24 hours with a consultation, not an auto-reply.
DFM Report
Before any steel is cut we return a design-for-manufacture report that flags flaws and errors in the design, so they are fixed on paper.
Mould Design & Moldflow
A predictive model analyses how the molten material behaves inside the cavity. Flow analysis settles gating and cooling before tooling.
Mould Tooling Production
Tooling is cut from the steel grade chosen for the application, not from whatever is on the rack.
T1 Sample Inspection
First-trial samples go out for your inspection and review. Errors are identified on T1, before mass production is committed.
Low Volume Production
A low-volume run follows the trial phase, so precision is proven on real machines under expert surveillance before the ramp.
Strict Inspection
Parts are inspected against international tolerance standards and against the specification you supplied.
Delivery
Parts are packaged to survive the journey and released through our logistics partners on a scheduled delivery.
Questions
About Product Design
Do you design from a specification or from a concept?
Either. The design team creates solutions that align with your specific requirements, whichever end you are starting from.
Will the design be checked for manufacturability?
Manufacturability is one of the three things the design is judged on, and it is checked again in the DFM report before tooling.
Can you work with our existing industrial design?
Yes. Send it and we will report on what would need to change to manufacture it, and what that change would cost you visually.
Related
Often Quoted Together
One-Stop Service
Injection MouldingMould Design & Moldflow Analysis
The argument about gating happens on screen, not on the shop floor
Read more
One-Stop ServiceFurther Reading
Related Articles
KnowledgeFrom Concept To Market: How Product Development Is Supported
Bringing a medical device from concept to market is a complex, multi-stage process. Most programmes fail at the joins between stages rather than inside them.
Read moreGet This Quoted
Attach the drawing or the 3D file and tell us the annual quantity. An engineer replies within 24 hours with a consultation.
An engineer replies within 24 hours. Attach a drawing or a 3D file and tell us the annual quantity.