Injection MouldingLSR / SSR Silicone Moulding
Liquid and solid silicone, rubber and NBR, sourced and moulded
Wisdom Industrial · since 2012
Overview
Silicone and rubber tooling and moulding across liquid silicone, solid silicone, rubber and NBR. Wisdom Industrial also manages the material sources for these grades, which is the part customers usually underestimate: silicone supply is where a programme stalls far more often than the tooling is.
Problems
What This Fixes
- Silicone parts sourced from a vendor who cannot also supply the rigid components
- Material supply for LSR and rubber managed by the customer across several vendors
- Seals and grips treated as an afterthought at the end of a plastic programme
- Soft components that need to be combined with a rigid substrate
Benefits
What You Get
- Four listed material families: liquid silicone, solid silicone, rubber and NBR
- We manage LSR and rubber sourcing as part of the one-stop service
- 2K injection tooling available where soft and rigid must be combined in one shot
- Tooling and moulding handled by the same group as your plastic parts
Who For
Suited To
- Product teams with seals, gaskets, grips or membranes in the design
- Buyers who currently split rigid and soft parts across two suppliers
- Medical and consumer products with skin-contact components
Scenarios
Typical Jobs
- An over-moulded silicone grip on a rigid handle
- A gasket moulded to sit in a housing made on the same site
- An NBR seal produced alongside the machined part it seals
Technical
How It Runs
- LSR and SSR mould tooling design and production
- Material source management for silicone and rubber grades
- 2K injection tooling for combining silicone with a rigid substrate
- Compression moulding available within the group's process list
At A Glance
Specification
Everything below is published because it is what an engineer checks before sending a drawing. Anything not listed is confirmed in the quotation rather than guessed at here.
| Capability | LSR / SSR Silicone Moulding |
|---|---|
| Group company | Wisdom Industrial, established 2012 |
| Category | Precision Manufacturing Processes |
| Materials | Liquid silicone, solid silicone, rubber and NBR |
| Location | Shenzhen, Guangdong, China |
| Certification | ISO 9001:2015 |
| Post-treatment | Plating, Anodizing, Painting, UV printing, Screen printing |
| Response time | Engineer replies within 24 hours |
Order Process
How This Job Would Run
The same eight stages apply whether the order is a single tool or a production programme.
Request A Quote
Send the part drawing or 3D file by email. An engineer comes back within 24 hours with a consultation, not an auto-reply.
DFM Report
Before any steel is cut we return a design-for-manufacture report that flags flaws and errors in the design, so they are fixed on paper.
Mould Design & Moldflow
A predictive model analyses how the molten material behaves inside the cavity. Flow analysis settles gating and cooling before tooling.
Mould Tooling Production
Tooling is cut from the steel grade chosen for the application, not from whatever is on the rack.
T1 Sample Inspection
First-trial samples go out for your inspection and review. Errors are identified on T1, before mass production is committed.
Low Volume Production
A low-volume run follows the trial phase, so precision is proven on real machines under expert surveillance before the ramp.
Strict Inspection
Parts are inspected against international tolerance standards and against the specification you supplied.
Delivery
Parts are packaged to survive the journey and released through our logistics partners on a scheduled delivery.
Questions
About LSR / SSR Silicone Moulding
Which silicone and rubber grades do you work with?
Liquid silicone, solid silicone, rubber and NBR are the listed materials for our LSR/SSR tooling.
Can silicone be combined with a rigid part in one operation?
That is what our 2K injection tooling is for: two materials combined in a single process, without a separate bonding step.
Do you source the material or do we?
We help customers manage the sources needed for different materials, including LSR and rubber. Tell us what is already contracted on your side.
Related
Often Quoted Together
Injection Moulding
Injection MouldingCustom Plastic Injection Moulding
Scientific moulding, from the first shot to the repeat order
Read more
One-Stop ServiceGet This Quoted
Attach the drawing or the 3D file and tell us the annual quantity. An engineer replies within 24 hours with a consultation.
An engineer replies within 24 hours. Attach a drawing or a 3D file and tell us the annual quantity.