Processes & Materials3D Printing & Additive Manufacturing
A Carbon 3D production partner, for parts that never need a tool
Read moreCNC Machining
Metal and engineering plastics cut on the machines that build our own tools
Wisdom Industrial · since 2012
Overview
CNC machining across metals and engineering plastics, run on the same equipment that produces our mould tooling. That matters more than it sounds: a shop that machines its own tool steel to a mould tolerance does not lose its discipline when the job is a customer's bracket.
Problems
What This Fixes
- Machining vendors who quote metal and plastic as if they cut the same way
- Prototype parts machined to a looser standard than the drawing asked for
- Separate suppliers for machined components and moulded components
- Finishing subcontracted out after machining, adding a week and a handover
Benefits
What You Get
- Seven listed material families covering both metals and engineering plastics
- The same machines and the same measuring room used for our own tooling
- Machined parts, moulded parts and finishing available from one supplier
- Anodizing, plating and painting available directly after machining
Who For
Suited To
- Engineers needing machined metal parts alongside moulded plastic ones
- Teams prototyping in the production material before committing to a tool
- Buyers replacing a machining vendor who cannot hold plastics
Scenarios
Typical Jobs
- An aluminium housing machined before the moulded version is tooled
- Stainless fittings machined to sit alongside moulded components
- Optical-grade PMMA or POM parts where the finish is the specification
Technical
How It Runs
- Metals: aluminium alloy, stainless steel and copper
- Engineering plastics: PC, POM, PMMA and PVC
- Measuring room inspection shared with the tooling operation
- Post-treatment including anodizing, plating, painting and printing
At A Glance
Specification
Everything below is published because it is what an engineer checks before sending a drawing. Anything not listed is confirmed in the quotation rather than guessed at here.
| Capability | CNC Machining |
|---|---|
| Group company | Wisdom Industrial, established 2012 |
| Category | Precision Manufacturing Processes |
| Materials | Aluminium alloy, stainless steel, copper, PC, POM, PMMA and PVC |
| Location | Shenzhen, Guangdong, China |
| Certification | ISO 9001:2015 |
| Post-treatment | Plating, Anodizing, Painting, UV printing, Screen printing |
| Response time | Engineer replies within 24 hours |
Order Process
How This Job Would Run
The same eight stages apply whether the order is a single tool or a production programme.
Request A Quote
Send the part drawing or 3D file by email. An engineer comes back within 24 hours with a consultation, not an auto-reply.
DFM Report
Before any steel is cut we return a design-for-manufacture report that flags flaws and errors in the design, so they are fixed on paper.
Mould Design & Moldflow
A predictive model analyses how the molten material behaves inside the cavity. Flow analysis settles gating and cooling before tooling.
Mould Tooling Production
Tooling is cut from the steel grade chosen for the application, not from whatever is on the rack.
T1 Sample Inspection
First-trial samples go out for your inspection and review. Errors are identified on T1, before mass production is committed.
Low Volume Production
A low-volume run follows the trial phase, so precision is proven on real machines under expert surveillance before the ramp.
Strict Inspection
Parts are inspected against international tolerance standards and against the specification you supplied.
Delivery
Parts are packaged to survive the journey and released through our logistics partners on a scheduled delivery.
Questions
About CNC Machining
Which materials do you machine?
Aluminium alloy, stainless steel, copper, PC, POM, PMMA and PVC are the listed materials for our CNC machining.
Can you machine and then finish the part?
Yes. Anodizing, plating, painting, UV printing and screen printing are available in-house after machining.
Do you machine tooling as well as parts?
Yes, this capability exists because the group builds its own mould tooling. Customer parts run on the same equipment.
Related
Often Quoted Together
Processes & Materials
Injection Moulding
One-Stop ServiceGet This Quoted
Attach the drawing or the 3D file and tell us the annual quantity. An engineer replies within 24 hours with a consultation.
An engineer replies within 24 hours. Attach a drawing or a 3D file and tell us the annual quantity.