3D Brushed Stainless Steel Sign Logo 04
Brand marks whose geometry is a shape rather than a letterform, mounted as a feature on a lobby wall.
View specification
Fabricated Metal Sign Letters · 3D Sign Letters
A polished and mirror finished stainless logo where the surface pattern is laser cut into the face. Because the cut lines are part of the artwork, a detailed technical drawing has to come with the enquiry.
A polished and mirror finished stainless logo where the surface pattern is laser cut into the face. Because the cut lines are part of the artwork, a detailed technical drawing has to come with the enquiry.
Best for. Logos that combine a solid metal body with cut-out detail, such as emblems and crests.
Watch out. Raster logos cannot be laser cut; supply vector artwork in AI, EPS or CDR format.
Logos that combine a solid metal body with cut-out detail, such as emblems and crests. It sits in our automotive showrooms work more often than anywhere else.
A logo that is a shape rather than a letterform cannot be made by folding sheet. It has to be formed, which takes longer, costs more and has a lower size limit. This category exists so that trade-off is visible before you order rather than after.
Vehicle brand signage is sculptural. The mark is usually a formed shape rather than a letterform, and that changes both the price and the lead time before anything else is decided. See the exact brand colour matching route for how this is specified on a live job.
These points are reproduced from our own production specification for 3D Fabricated Stainless Steel Logo 07. Nothing has been added to them.
| Construction | Formed 3D fabrication over a curved surface |
|---|---|
| Material | Genuine 304 or 316 grade stainless steel |
| Surface finish | Mirror polished |
| Illumination | Not illuminated |
| LED module | Built-in high quality waterproof LED |
| Fixing method | Back screw bolt, 3M double-sided adhesive tape, a PVC or foam backing |
| Supplied with the order | 1:1 scale mounting template, fixing screws |
| Production time | 5 to 7 days |
| Shipping | DHL or UPS express door to door, approximately 4 to 5 days |
| Payment terms | T/T, Western Union, PayPal |
| Minimum order quantity | None |
TBC means the figure is not stated on our original specification and has not been estimated.
Genuine 304 or 316 grade stainless steel Finish: mirror polished.
Formed 3D fabrication over a curved surface. Artwork in AI, EPS or CDR fixes the geometry before anything is cut.
Joints are dressed before finishing, and illuminated builds are wired and lit before the back is closed. Formal QC documentation is TBC.
Factory level certification is TBC and is not claimed on this site.
Seven builds where the metal is formed over a curve rather than folded flat, including laser cut faces, prismatic numerals and a backlit curved car signage panel.
The alternative constructions in this catalogue are set out in fabricated or flat cut which construction to use, and the illumination choices in frontlit backlit or edge lit.
Raster logos cannot be laser cut; supply vector artwork in AI, EPS or CDR format.
Brand marks whose geometry is a shape rather than a letterform, mounted as a feature on a lobby wall.
View specificationLogos that combine a solid metal body with cut-out detail, such as emblems and crests.
View specification
Building and street numbers, floor markers and anniversary figures.
View specificationThe mark is a sculpted shape with a continuous curved surface. Folded sheet construction cannot produce it, and flat cutting would lose the three-dimensional reading entirely.
Buying GuideFour things turn an enquiry into a price. Missing any one of them turns it into a conversation.
DownloadsMaterials, finishes, fixings and lead times in one PDF, plus the full catalogue as a CSV.
Genuine 304 or 316 grade stainless steel. The construction is formed 3D fabrication over a curved surface. Surface finish: mirror polished.
Production runs 5 to 7 days. Add roughly 4 to 5 days for DHL or UPS express door to door, and allow time for artwork approval before production starts.
Fixing is by back screw bolt, 3m double-sided adhesive tape, a pvc or foam backing. The order includes 1:1 scale mounting template, fixing screws. Set the letters out from the template rather than by eye.
Raster logos cannot be laser cut; supply vector artwork in AI, EPS or CDR format.
Yes. There is no minimum order quantity on this catalogue and any order quantity is accepted. Shipping cost per letter falls sharply once several travel in the same carton, so order a full word together where you can.
Send the artwork and the finished letter height and the quotation comes back with the production window and the shipping estimate attached.