Stainless Steel Letters
Satin Stainless Steel Letters 11
Mixed-light interiors such as airport corridors and shopping mall concourses.
View specification
A reception wordmark is looked at from two metres by people with nothing else to do. Every seam, every kerning error and every uneven reflection is visible.
Four constraints decide the build before the design does. Each one has a factory answer.
A polished lobby wordmark reflects whatever is opposite it, including the reception desk and the door. Brushed and satin stainless diffuse the reflection and keep the letterform readable from an angle.
Individual letters fixed by eye end up uneven. Every fabricated order ships with a 1:1 scale mounting template so the installer sets out from paper, and back stud or screw bolt fixing keeps the letters where the template put them.
Where drilling is ruled out, 3M double-sided tape or a PVC or foam backing is available on several builds. Tape needs a clean, flat, non-porous surface and has a size limit, so the wall and the letter height both have to be stated.
Letters standing off the wall on studs show their return. Two-finish builds, brushed on the face and polished on the back and returns, exist for exactly that situation and have to be specified on the drawing.
Mixed-light interiors such as airport corridors and shopping mall concourses.
View specification
Interior reception walls lit by ceiling downlights, where mirror steel would glare.
View specification
Hotel and office lobbies where the letters are read against an evenly lit feature wall.
View specification
Low maintenance exterior identification on stone or glass facades.
View specification
Retail fascias and office entrances where the client wants metal that reads as solid but stays matte under spotlights.
View specification
Medical, legal and consultancy practices that use a serif wordmark and need it to survive outdoors.
View specificationThe largest group in the catalogue: 25 builds of fabricated 304 and 316 stainless, separated by how the surface is finished rather than by how the letter is made.
19 productsNineteen builds where the face stays solid metal and the LED throws light onto the wall behind, producing the halo or corona outline.
2 productsTwo builds cut from solid 304 or 316 stainless, one polished and one in a golden brushed finish, with the cut edge finished as carefully as the face.
Production runs 5 to 7 days on most fabricated and channel letters and 7 to 10 days on lightboxes, flag signs and thick solid acrylic. DHL or UPS express adds roughly 4 to 5 days door to door, and the carton contains the fixing accessories, the 1:1 scale mounting template and, on illuminated orders, the transformer.
A halo is produced by the wall, not by the letter. Four decisions control the result and only one of them is about the letter itself.
SolutionThere is no minimum order quantity anywhere in this catalogue. That is a real commercial position, not a slogan, and it changes how small jobs get handled.
Build StudyThe brand colour had to appear at night without the letter face glowing, so the sign reads as solid brushed metal in daylight and as a coloured outline after dark.
Build StudyThe mark is a sculpted shape with a continuous curved surface. Folded sheet construction cannot produce it, and flat cutting would lose the three-dimensional reading entirely.
Material GuideThe grade question has a short answer that depends almost entirely on how close the sign is to salt water.
Installation GuideFour fixing methods, one template, and the handful of site conditions that decide which one you can actually use.
Brushed or satin in almost every case. Polished mirror works when the wall is dark and the lighting is indirect; under ceiling downlights it glares.
Yes, and it has to be written on the drawing. Left unspecified, the whole letter comes in one finish.
It is 1:1 scale, produced from the same artwork as the letters. It is paper, so laminate it if the site is damp before it goes on the wall.
On bare stainless, yes. On powder coated or painted work a later batch can shift in colour, so tell us at the first order if the set may grow.
Tell us the site, the fascia depth limit and the handover date along with the artwork, and the quotation comes back with a build that fits all three.