New factory sealed hardware from Hong Kong · serial list before shipment
Cisco · Cisco Catalyst 9200

C9200L-24T-4G-E

  • Part number C9200L-24T-4G-E
  • Brand Cisco
  • New factory sealed

C9200L-24T-4G-E is the Catalyst 9200L 24-port Data 4x1G uplink Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of depl...

Ports
24 ports data
Throughput
56 Gbps
Uplinks
4x 1G fixed uplinks
Stacking
80 Gbps
MAC Table
16,000
Default primary AC power supply
PWR-C5-125WAC
  • New factory sealed in the original vendor carton
  • Serial list issued before shipment
  • 12 months replacement warranty as standard
  • Worldwide courier or freight from Hong Kong
Product Overview

C9200L-24T-4G-E Overview

C9200L-24T-4G-E is the Catalyst 9200L 24-port Data 4x1G uplink Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise - it is secure, always on, and IT simplified. The published specification for C9200L-24T-4G-E lists 24 ports data and a published switching capacity of 56 Gbps. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.

Key Benefits

What Owning C9200L-24T-4G-E Changes

Rated Performance Written Into the Quotation

56 Gbps published for C9200L-24T-4G-E as its switching capacity, confirmed against the current datasheet revision when the line is quoted.

One Managed Unit Instead of Several

stacking bandwidth of 80 Gbps on this model lets a multi switch closet be configured monitored and upgraded as a single device, which cuts the work in every change window.

Uplink Capability Settled at Order Not at Install

4x 1G fixed uplinks on C9200L-24T-4G-E, so the uplink question is answered on the quotation rather than discovered when the unit is already racked.

Table Sizes Checked Against the Design

A Total number of MAC addresses of 16,000 on this model, the kind of ceiling that only becomes visible once a flat segment has grown.

Port Layout Confirmed Before You Commit

24 ports data on this part number, so the closet design is checked against the real layout rather than against a family datasheet that covers several models.

Problems It Solves

Pain Points C9200L-24T-4G-E Removes

  • Uplink type fixed at purchase and discovered wrong at install
  • PoE capacity sized for phones and now carrying cameras and access points
  • Performance taken from a family datasheet rather than from this part number, where the published switching capacity is 56 Gbps
  • Uplink capability fixed at purchase and found insufficient once the access layer behind it was refreshed
  • End of sale announcements that leave a proven design with no supply route for C9200L-24T-4G-E
Who It Is For

Who Benefits Most From C9200L-24T-4G-E

Managed Service Providers

Standardising hardware across many customer sites and needing the same SKU available again

Enterprise IT Teams

Replacing equipment that has reached end of support before an audit rather than after one

Data Centre Operators

Adding capacity in defined increments as cabinets and rows fill up

Branch Network Teams

Rolling out one site design across many locations on a fixed bill of materials

Specifications

C9200L-24T-4G-E Manufacturer Specification

As published by Cisco for this part number. Full electrical, port and performance specifications are issued with the quotation against the current datasheet revision.

C9200L-24T-4G-E specification
Downlinks total 10/100/1000 or PoE+ copper ports24 ports data
Uplink configuration4x 1G fixed uplinks
Default primary AC power supplyPWR-C5-125WAC
FansFixed redundant
Chassis Dimensions1.73 x 17.5 x 11.3 in 4.4 x 44.5 x 28.8 cm
Weight4.35 Kg
Virtual Networks1
Stacking bandwidth80 Gbps
Total number of MAC addresses16,000
Total number of IPv4 routes (ARP plus learned routes)11,000 (8,000 direct routes and 3,000 indirect routes)
IPv4 routing entries3,000
IPv6 routing entries1,500
Multicast routing scale1,000
QoS scale entries1,000
ACL scale entries1,500
Packet buffer per SKU6 MB buffers for 24- or 48-port Gigabit Ethernet models
Flexible NetFlow (FNF) entries16,000 flows on 24- and 48-port Gigabit Ethernet models
DRAM2 GB
Flash4 GB
VLAN IDs1024
Total Switched Virtual Interfaces (SVIs)512
Jumbo frames9198 bytes
Wireless bandwidth per switchN/A
Switching capacity56 Gbps
Forwarding rate83.33 Mpps
Mean time between failures (hours)531,030
Supply Terms

How C9200L-24T-4G-E Is Supplied

C9200L-24T-4G-E supply terms
Part NumberC9200L-24T-4G-E
BrandCisco
CategoryCisco Catalyst 9200
Product ConditionNew factory sealed
Serial TraceabilityFull serial list supplied before shipment
Warranty12 months replacement plus optional vendor support contract
PackagingOriginal vendor carton with export grade outer
Lead TimeConfirmed in writing per line at quotation
DeliveryWorldwide courier or freight from Hong Kong
Comparison

C9200L-24T-4G-E Against Other Models in Cisco Catalyst 9200

Values are taken from each manufacturer specification. A blank means the manufacturer does not publish that attribute for that model.

Comparison of C9200L-24T-4G-E with related models
AttributeC9200L-24T-4G-EC9200-48T-AC9200-48T-EC9200L-24P-4G-A
Ports24 ports data48 ports data48 ports data24 ports full PoE+
Throughput56 Gbps176 Gbps176 Gbps56 Gbps
Uplinks4x 1G fixed uplinksModular uplink optionsModular uplink options4x 1G fixed uplinks
Stacking80 Gbps160 Gbps160 Gbps80 Gbps
MAC Table16,00032,00032,00016,000
Default primary AC power supplyPWR-C5-125WACPWR-C6-125WACPWR-C6-125WACPWR-C5-600WAC
Product pageView C9200L-24T-4G-EView C9200-48T-AView C9200-48T-EView C9200L-24P-4G-A
Use Guide

Deployment Guide for C9200L-24T-4G-E

  1. Confirm the Full Part Number

    Check C9200L-24T-4G-E character for character including any suffix. On this class of hardware a single trailing character commonly changes the software tier, the power option, or whether a bundle is included.

  2. Check Site Prerequisites

    Confirm rack space, power feed, cabling and any uplink or accessory dependency before the order rather than on the day of installation.

  3. Settle the Uplink and Optics

    Match the uplink module and transceiver to the platform, the measured span and the fibre already installed, and order them on the same line.

  4. Record It on Arrival

    Photograph the sealed carton, reconcile the serial against the list supplied before shipment, then open and confirm the unit matches the label.

  5. Bench Power Before Racking

    Power the unit, capture the software version and the port or drive inventory, and record it while the unit is still accessible.

  6. Register Support Entitlement

    Register the support contract under the end user name so the entitlement sits with the organisation that owns the outage.

Related Products

Other Models in Cisco Catalyst 9200

C9200-48T-A

C9200-48T-A is the Catalyst 9200 48-port Data Switch, with Network Advantage software. Cisco Catalyst 9200 Series switches extend the power of intent-

C9200-48T-E

C9200-48T-E is the Catalyst 9200 48-port Data Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent

C9200L-24P-4G-A

C9200L-24P-4G-A is the Catalyst 9200L 24 ports full PoE+ 4x1G uplink Switch, with Network Advantage software. Cisco Catalyst 9200 Series switches exte

C9200L-24P-4G-E

C9200L-24P-4G-E is the Catalyst 9200L 24 ports full PoE+ 4x1G uplink Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches ext

C9200L-24T-4G-A

C9200L-24T-4G-A is the Catalyst 9200L 24-port Data 4x1G uplink Switch, with Network Advantage software. Cisco Catalyst 9200 Series switches extend the

C9200-24P-A

C9200-24P-A is the Catalyst 9200 24-port PoE+ Switch, with Network Advantage software. Cisco Catalyst 9200 Series switches extend the power of intent-

C9200-24P-E

C9200-24P-E is the Catalyst 9200 24-port PoE+ Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent

C9200-24T-E

C9200-24T-E is the Catalyst 9200 24-port Data Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent

Where It Goes

Industries That Deploy It

Data Center

Top of rack switching, compute and storage delivered in the phased increments a cabinet build actually consumes.

Enterprise Campus

Access, distribution and wireless supplied to one standard so every closet in every building behaves the same way.

Solutions

Programmes It Is Supplied Under

Support Contracts and SmartNet

A support contract registered under a reseller name is of limited use to the organisation that owns the outage. Entitlement is written under the end user name.

Reference

Project Cases and Guides

FAQ

C9200L-24T-4G-E Frequently Asked Questions

Is C9200L-24T-4G-E New or Refurbished

Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.

Can I Get the Serial Numbers for C9200L-24T-4G-E Before Payment Clears

Yes. Serials are issued before shipment so you can check them on the manufacturer portal while the goods are still with us.

What Is the Lead Time for C9200L-24T-4G-E

Availability is confirmed in writing per line at quotation rather than as a project average, because one late line is what moves an installation date.

What Warranty Does C9200L-24T-4G-E Carry

12 months replacement as standard. A vendor support contract is available separately and is registered under the end user name.

What Performance Is C9200L-24T-4G-E Rated For

The published switching capacity is 56 Gbps. Full port and performance specifications are issued with the quotation against the current datasheet revision.

Are Uplink Modules and Optics Included With C9200L-24T-4G-E

They are quoted as separate lines and reviewed against the chassis before the quotation is issued, so they reach site in the same consignment as the unit they belong to.

Can C9200L-24T-4G-E Be Stacked With Other Switches

The manufacturer lists stacking bandwidth of 80 Gbps for this model. Stacking cables are a separate line and are quoted with the switches so a multi switch closet arrives complete.

Does C9200L-24T-4G-E Supply Power Over Ethernet

The manufacturer does not publish an available PoE figure for this model, which normally indicates a data only variant. Where powered devices are in the design, confirm the port type letter in the part number before ordering.

What Table Sizes Does C9200L-24T-4G-E Carry

The published Total number of MAC addresses is 16,000. Table ceilings usually only become visible once a flat segment has grown, so they are worth checking against the design rather than against today's estate.

Request Pricing for C9200L-24T-4G-E

Send the quantity and destination country. Availability and lead time come back in writing, with the serial list before shipment.