New factory sealed hardware from Hong Kong · serial list before shipment
Cisco · Cisco Catalyst 9200

C9200L-24P-4G-A

  • Part number C9200L-24P-4G-A
  • Brand Cisco
  • New factory sealed

C9200L-24P-4G-A is the Catalyst 9200L 24 ports full PoE+ 4x1G uplink Switch, with Network Advantage software. Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of...

Ports
24 ports full PoE+
Throughput
56 Gbps
Uplinks
4x 1G fixed uplinks
Stacking
80 Gbps
MAC Table
16,000
Default primary AC power supply
PWR-C5-600WAC
  • New factory sealed in the original vendor carton
  • Serial list issued before shipment
  • 12 months replacement warranty as standard
  • Worldwide courier or freight from Hong Kong
Product Overview

C9200L-24P-4G-A Overview

C9200L-24P-4G-A is the Catalyst 9200L 24 ports full PoE+ 4x1G uplink Switch, with Network Advantage software. Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise - it is secure, always on, and IT simplified. The published specification for C9200L-24P-4G-A lists 24 ports full PoE+ and a published switching capacity of 56 Gbps. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.

Key Benefits

What Owning C9200L-24P-4G-A Changes

Port Layout Confirmed Before You Commit

24 ports full PoE+ on this part number, so the closet design is checked against the real layout rather than against a family datasheet that covers several models.

Rated Performance Written Into the Quotation

56 Gbps published for C9200L-24P-4G-A as its switching capacity, confirmed against the current datasheet revision when the line is quoted.

One Managed Unit Instead of Several

stacking bandwidth of 80 Gbps on this model lets a multi switch closet be configured monitored and upgraded as a single device, which cuts the work in every change window.

Uplink Capability Settled at Order Not at Install

4x 1G fixed uplinks on C9200L-24P-4G-A, so the uplink question is answered on the quotation rather than discovered when the unit is already racked.

Table Sizes Checked Against the Design

A Total number of MAC addresses of 16,000 on this model, the kind of ceiling that only becomes visible once a flat segment has grown.

Problems It Solves

Pain Points C9200L-24P-4G-A Removes

  • Uplink capability fixed at purchase and found insufficient once the access layer behind it was refreshed
  • End of sale announcements that leave a proven design with no supply route for C9200L-24P-4G-A
  • Branch closets running unmanaged or end of support switches with no asset record
  • A uniform branch standard that has to be bought in small repeat quantities
  • Uplink type fixed at purchase and discovered wrong at install
Who It Is For

Who Benefits Most From C9200L-24P-4G-A

Branch Network Teams

Rolling out one site design across many locations on a fixed bill of materials

Service Providers

Deploying managed hardware at customer premises with consistent revision and firmware

Education IT

Delivering inside vacation windows against a budget year that rarely aligns with the install date

Healthcare Estates

Working to very short change windows with serial level records required for compliance

Specifications

C9200L-24P-4G-A Manufacturer Specification

As published by Cisco for this part number. Full electrical, port and performance specifications are issued with the quotation against the current datasheet revision.

C9200L-24P-4G-A specification
Downlinks total 10/100/1000 or PoE+ copper ports24 ports full PoE+
Uplink configuration4x 1G fixed uplinks
Default primary AC power supplyPWR-C5-600WAC
FansFixed redundant
Chassis Dimensions1.73 x 17.5 x 11.3 in 4.4 x 44.5 x 28.8 cm
Weight4.35 Kg
Virtual Networks1
Stacking bandwidth80 Gbps
Total number of MAC addresses16,000
Total number of IPv4 routes (ARP plus learned routes)11,000 (8,000 direct routes and 3,000 indirect routes)
IPv4 routing entries3,000
IPv6 routing entries1,500
Multicast routing scale1,000
QoS scale entries1,000
ACL scale entries1,500
Packet buffer per SKU6 MB buffers for 24- or 48-port Gigabit Ethernet models
Flexible NetFlow (FNF) entries16,000 flows on 24- and 48-port Gigabit Ethernet models
DRAM2 GB
Flash4 GB
VLAN IDs1024
Total Switched Virtual Interfaces (SVIs)512
Jumbo frames9198 bytes
Wireless bandwidth per switchN/A
Switching capacity56 Gbps
Forwarding rate83.33 Mpps
Mean time between failures (hours)392,210
Supply Terms

How C9200L-24P-4G-A Is Supplied

C9200L-24P-4G-A supply terms
Part NumberC9200L-24P-4G-A
BrandCisco
CategoryCisco Catalyst 9200
Product ConditionNew factory sealed
Serial TraceabilityFull serial list supplied before shipment
Warranty12 months replacement plus optional vendor support contract
PackagingOriginal vendor carton with export grade outer
Lead TimeConfirmed in writing per line at quotation
DeliveryWorldwide courier or freight from Hong Kong
Comparison

C9200L-24P-4G-A Against Other Models in Cisco Catalyst 9200

Values are taken from each manufacturer specification. A blank means the manufacturer does not publish that attribute for that model.

Comparison of C9200L-24P-4G-A with related models
AttributeC9200L-24P-4G-AC9200L-24T-4G-AC9200L-24T-4G-EC9200-24P-A
Ports24 ports full PoE+24 ports data24 ports data24 ports full PoE+
Throughput56 Gbps56 Gbps56 Gbps128 Gbps
Uplinks4x 1G fixed uplinks4x 1G fixed uplinks4x 1G fixed uplinksModular uplink options
Stacking80 Gbps80 Gbps80 Gbps160 Gbps
MAC Table16,00016,00016,00032,000
Default primary AC power supplyPWR-C5-600WACPWR-C5-125WACPWR-C5-125WACPWR-C6-600WAC
Product pageView C9200L-24P-4G-AView C9200L-24T-4G-AView C9200L-24T-4G-EView C9200-24P-A
Use Guide

Deployment Guide for C9200L-24P-4G-A

  1. Confirm the Full Part Number

    Check C9200L-24P-4G-A character for character including any suffix. On this class of hardware a single trailing character commonly changes the software tier, the power option, or whether a bundle is included.

  2. Check Site Prerequisites

    Confirm rack space, power feed, cabling and any uplink or accessory dependency before the order rather than on the day of installation.

  3. Settle the Uplink and Optics

    Match the uplink module and transceiver to the platform, the measured span and the fibre already installed, and order them on the same line.

  4. Record It on Arrival

    Photograph the sealed carton, reconcile the serial against the list supplied before shipment, then open and confirm the unit matches the label.

  5. Bench Power Before Racking

    Power the unit, capture the software version and the port or drive inventory, and record it while the unit is still accessible.

  6. Register Support Entitlement

    Register the support contract under the end user name so the entitlement sits with the organisation that owns the outage.

Related Products

Other Models in Cisco Catalyst 9200

C9200L-24T-4G-A

C9200L-24T-4G-A is the Catalyst 9200L 24-port Data 4x1G uplink Switch, with Network Advantage software. Cisco Catalyst 9200 Series switches extend the

C9200L-24T-4G-E

C9200L-24T-4G-E is the Catalyst 9200L 24-port Data 4x1G uplink Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend th

C9200-24P-A

C9200-24P-A is the Catalyst 9200 24-port PoE+ Switch, with Network Advantage software. Cisco Catalyst 9200 Series switches extend the power of intent-

C9200-24P-E

C9200-24P-E is the Catalyst 9200 24-port PoE+ Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent

C9200-24T-E

C9200-24T-E is the Catalyst 9200 24-port Data Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent

C9200-48P-A

C9200-48P-A is the Catalyst 9200 48-port PoE+ Switch, with Network Advantage software. Cisco Catalyst 9200 Series switches extend the power of intent-

C9200-48P-E

C9200-48T-E is the Catalyst 9200 48-port Data Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent

C9200-48T-A

C9200-48T-A is the Catalyst 9200 48-port Data Switch, with Network Advantage software. Cisco Catalyst 9200 Series switches extend the power of intent-

Where It Goes

Industries That Deploy It

Education

Wireless density and access capacity delivered against academic calendars and fixed budget years.

Healthcare

Hardware supplied with the traceability and change discipline a clinical environment requires.

Solutions

Programmes It Is Supplied Under

Network Refresh Programme

Most refresh projects fail on supply rather than on design. A phased programme only works if every phase arrives complete on the date the change window was booked.

Reference

Project Cases and Guides

FAQ

C9200L-24P-4G-A Frequently Asked Questions

Is C9200L-24P-4G-A New or Refurbished

Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.

Can I Get the Serial Numbers for C9200L-24P-4G-A Before Payment Clears

Yes. Serials are issued before shipment so you can check them on the manufacturer portal while the goods are still with us.

What Is the Lead Time for C9200L-24P-4G-A

Availability is confirmed in writing per line at quotation rather than as a project average, because one late line is what moves an installation date.

What Warranty Does C9200L-24P-4G-A Carry

12 months replacement as standard. A vendor support contract is available separately and is registered under the end user name.

What Performance Is C9200L-24P-4G-A Rated For

The published switching capacity is 56 Gbps. Full port and performance specifications are issued with the quotation against the current datasheet revision.

Are Uplink Modules and Optics Included With C9200L-24P-4G-A

They are quoted as separate lines and reviewed against the chassis before the quotation is issued, so they reach site in the same consignment as the unit they belong to.

Can C9200L-24P-4G-A Be Stacked With Other Switches

The manufacturer lists stacking bandwidth of 80 Gbps for this model. Stacking cables are a separate line and are quoted with the switches so a multi switch closet arrives complete.

Does C9200L-24P-4G-A Supply Power Over Ethernet

The manufacturer does not publish an available PoE figure for this model, which normally indicates a data only variant. Where powered devices are in the design, confirm the port type letter in the part number before ordering.

What Table Sizes Does C9200L-24P-4G-A Carry

The published Total number of MAC addresses is 16,000. Table ceilings usually only become visible once a flat segment has grown, so they are worth checking against the design rather than against today's estate.

Request Pricing for C9200L-24P-4G-A

Send the quantity and destination country. Availability and lead time come back in writing, with the serial list before shipment.