Through Bore Slip Rings
Industry
Slip Rings for CT Scanners Surgical Lights and Medical Robots
CT gantries, surgical lighting heads and medical robots turn continuously around the patient, and the rotating joint has to carry power, high rate data and control signals without introducing noise into the image.
Industry Pain Points
What Goes Wrong on These Axes
Constraint 1
Imaging data rates leave no tolerance for contact noise or packet loss at the joint.
Constraint 2
Clinical equipment is expected to run for years with no field service on the rotating connector.
Constraint 3
Space inside a gantry or a lighting head is tight and every millimetre of axial length is contested.
How INGIANT answers it
INGIANT supplies slip rings for CT and surgical lighting and for medical robots used in surgical technology. Where the data rate is beyond copper, a fibre optic rotary joint carries the imaging link and the electrical rings stay for power and control.
Suitable Families
Product Families That Fit This Industry
201 models
Through Bore Slip Rings
A through bore slip ring carries power and signals around a hollow centre, so a drive shaft, a hydraulic line, an optical cable…
141 models
Capsulated Slip Rings
A capsulated slip ring is a sealed cylinder with a solid shaft: the rotor turns, the stator stays still, and both ends leave the…
62 models
Fiber Optic Rotary Joints
A fibre optic rotary joint passes light across a rotating interface, so bandwidth, isolation and immunity to electrical noise…
77 models
Ethernet Slip Rings
An Ethernet slip ring — also called a network slip ring or RJ45 slip ring — carries 10/100/1000 Base-T traffic through a…
Products
Recommended Models
A starting point — the full family pages carry every model.
Through Bore Slip Rings
DHK080-33 Ingiant standard through hole slip ring hole diameter 80mm with 33…
Capsulated Slip Rings
DHS050-20-002 Ingiant Flange install slip ring standard out diameter 50mm…
Capsulated Slip Rings
DHS045-95 DHS045-95 Ingiant OD 45mm rotor flange slip ring transmits 81…
Fiber Optic Rotary Joints
DHS055-11-2F Ingiant Photoelectric Slip Ring OD 55mm with 2 channels optical…
Fiber Optic Rotary Joints
DHS066-39-1F Ingiant Optoelectronic slip ring OD 66mm with 1 single mode…
Ethernet Slip Rings
DHK015-55-002 Ingiant through hole Gigabit Ethernet slip ring hole diameter…
Delivery Capability
What You Get With the Part
Lead time
7–15 days for standard products, 10–20 days for simple customisation and 15–40 days for complex customisation.
Quality system
ISO 9001, GJB9001C and GB/T 19001-2008 / ISO 9001:2008, with electrical and functional testing before despatch.
Warranty and support
12 months from date of sale, with regular technical information and training support and direct engineer contact by email or WhatsApp.
Knowledge
Articles on Medical Equipment
2025-11-06
Primary Applications of Slip Rings in Karting
Primary Applications of Slip Rings in Karting The fundamental role of a slip ring is to transmit signals, data, and power…
2025-09-11
What are the differences between explosion-proof conductive slip rings and ordinary conductive slip rings?
What are the differences between explosion-proof conductive slip rings and ordinary conductive slip rings? Explosion-proof slip…
2025-08-12
INGIANT RF Rotary Joint: High-Fidelity Signal Transmission in Demanding Rotating Systems
JiuJiang INGIANT Technology Co., Ltd. (est. 2014), based in Jiujiang National Economic & Technological Development Zone,…
FAQ
Medical Equipment Questions
How do you keep image data clean across the joint?
Precious metal contacts and fibre brush bundle contact structures hold the dynamic resistance variation below 10 mΩ, and where the data rate demands it the link moves to an optical rotary joint.
What life should I specify for a CT gantry?
Specify the revolutions per year you expect and INGIANT will match a Standard, Industrial or Premium grade to it.
Can you build to our installation envelope?
Yes — send the envelope, the circuit count and the signal types and the unit is designed around them.
Specify a Rotating Connection for Medical Equipment
Send the rotating speed, the installation envelope, the circuit count, the signal types, the temperature range and the IP requirement and INGIANT comes back with a design.