- Home
- Products
- Diamond Grinding Cup Wheels
- Single Row Diamond Grinding Cup Wheel
Single Row Diamond Grinding Cup Wheel
Single row wheel for controlled concrete grinding
One segment row puts less wheel in contact, so the operator keeps control near walls and edges. Available sintered or high-frequency welded, Item IDs CA105SRW-CA180SRW.
What Single Row Diamond Grinding Cup Wheel Is For
The plant specification sheet describes this tool as for smooth and fast grinding concrete. That is exactly where it belongs, and where it stops.
The specification table lists 7 sizes, Item IDs CA105SRW to CA230SRW.
Inside Diamond Grinding Cup Wheels there are 10 items to choose between. This one is the single row wheel for controlled concrete grinding option — the comparison further down this page sets it against the others.
How It Is Built
Manufacturing route
Sintered type and high frequency welded type are available. This is what holds the diamond in place under working load.
Item ID series
Ordering runs on the CA105SRW to CA230SRW series, so repeat orders return the same specification.
Sizes beyond the standard list
Other sizes and specifications are available upon request.
Export handling
Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.
Sizes and Item IDs
Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.
| Item ID | Diameter | Bore size | Segment | ||
|---|---|---|---|---|---|
| mm | inch | mm | size (mm) | number | |
| CA105SRW | 105 | 4" | 20 | 30*5*8 | 8 |
| CA115SRW | 115 | 4.5" | 22.23 | 30*5*8 | 9 |
| CA125SRW | 125 | 5" | 22.23 | 31*5*8 | 9 |
| CA150SRW | 150 | 6" | 22.23 | 35*5*8 | 10 |
| CA180SRW | 180 | 7" | 22.23 | 35*5*8 | 12 |
| CA230SRW | 230 | 9" | 22.23 | 35*5*8 | 16 |
- Product family
- Construction and Demolition
- Category
- Diamond Grinding Cup Wheels
- Manufacturing route
- Sintered type and high frequency welded type are available.
- Country of manufacture
- China (Shangqiu, Henan)
- Private label
- Laser marking on the steel core available for OEM orders
Who It Is For
- Concrete floor grinding contractors
- Surface preparation crews before coating
- Renovation and repair contractors
Every one of these buyers gets the same first question from us: what material, what machine, what size.
The Problem It Solves
Coating failures usually trace back to a surface that was never properly prepared.
Single Row Diamond Grinding Cup Wheel is the answer to that in the diamond grinding cup wheels part of the range: single row wheel for controlled concrete grinding.
For smooth and fast grinding concrete.
Why This Version and Not Another
Ten segment geometries from fast removal to smooth finish
Applies across the diamond grinding cup wheels series, including this item.
Silver-welded and sintered versions of the same sizes
Part of how this category is built.
Dia 105-230 mm on 20 and 22.23 mm bores
Part of how this category is built.
Use Guide
Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.
Compared With the Rest of the Category
Diamond Grinding Cup Wheels holds 10 items in the programme. The difference between them is geometry and construction, not marketing.
- Arrow Segment Diamond Grinding Cup Wheel — arrow segments for fast concrete removal
- Continuous Rim Diamond Grinding Wheel with Slot — slotted rim balancing finish and cooling
- Continuous Rim Diamond Grinding Wheel — continuous rim for smoothing concrete surfaces
- Double Row Diamond Grinding Cup Wheel — double row wheel for long removal runs
- L Segment Diamond Grinding Cup Wheel — l segments for edge work on concrete floors
- Straight Turbo Diamond Grinding Wheel — straight turbo profile for even concrete grinding
Single Row Diamond Grinding Cup Wheel — Questions We Get Asked
What sizes does Single Row Diamond Grinding Cup Wheel come in
The standard programme lists 7 sizes on this page, Item IDs CA105SRW to CA230SRW. Other sizes and specifications are available upon request.
What do you need to quote Single Row Diamond Grinding Cup Wheel
The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.
What is the lead time and minimum order for Single Row Diamond Grinding Cup Wheel
Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)
Others in the Same Part of the Range
Arrow Segment Diamond Grinding Cup Wheel
Arrow segments for fast concrete removal
View specifications →
Continuous Rim Diamond Grinding Wheel with Slot
Slotted rim balancing finish and cooling
View specifications →
Continuous Rim Diamond Grinding Wheel
Continuous rim for smoothing concrete surfaces
View specifications →
Double Row Diamond Grinding Cup Wheel
Double row wheel for long removal runs
View specifications →
L Segment Diamond Grinding Cup Wheel
L segments for edge work on concrete floors
View specifications →
Straight Turbo Diamond Grinding Wheel
Straight turbo profile for even concrete grinding
View specifications →
T Segment Diamond Grinding Cup Wheel
T segments for grinding into concrete corners
View specifications →
Turbo Wave Diamond Grinding Cup Wheel
Wave turbo wheel for cooler concrete grinding
View specifications →Related Technical Guides
Get a quote for Single Row Diamond Grinding Cup Wheel
Send the material, machine and size. You will get a specification and a price, not a catalogue page.