- Home
- Products
- Tuck Point & Crack Chaser
- Laser Welded Crack Chaser
Laser Welded Crack Chaser
Crack chaser for opening cracks before filling
A crack chaser follows an existing crack and opens it to a fillable profile rather than cutting a fresh straight joint. Item IDs CA105CC-CA230CC are laser-welded for the side load that involves.
What Laser Welded Crack Chaser Is For
The plant specification sheet describes this tool as for fast cutting concrete, asphalt, hard brick, masonry with laser welded segments. That is exactly where it belongs, and where it stops.
The specification table lists 7 sizes, Item IDs CA105CC to CA230CC.
Inside Tuck Point & Crack Chaser there are 4 items to choose between. This one is the crack chaser for opening cracks before filling option — the comparison further down this page sets it against the others.
How It Is Built
Bond selected per enquiry
We do not ship a single general-purpose bond. Laser welded.
Item ID series
Ordering runs on the CA105CC to CA230CC series, so repeat orders return the same specification.
Sizes beyond the standard list
Other sizes are available upon customer's request.
Export handling
Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.
Sizes and Item IDs
Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.
| Item ID | Diameter | Bore size | Segment | ||
|---|---|---|---|---|---|
| mm | inch | mm | thickness (mm) | height (mm) | |
| CA105CC | 105 | 4" | 22.23 | 6.4/9.5 | 10 |
| CA125CC | 125 | 5" | 22.23 | 6.4/9.5 | 10 |
| CA150CC | 150 | 6" | 22.23 | 6.4/9.5 | 10 |
| CA180CC | 180 | 7" | 22.23 | 6.4/9.5 | 10 |
| CA200CC | 200 | 8" | 22.23 | 6.4/9.5 | 10 |
| CA230CC | 230 | 9" | 22.23 | 6.4/9.5 | 10 |
- Product family
- Construction and Demolition
- Category
- Tuck Point & Crack Chaser
- Bond
- Laser welded.
- Country of manufacture
- China (Shangqiu, Henan)
- Private label
- Laser marking on the steel core available for OEM orders
Who It Is For
- Concrete repair contractors
- Road and pavement maintenance crews
- Restoration masons
Every one of these buyers gets the same first question from us: what material, what machine, what size.
The Problem It Solves
Chasing a crack with a standard blade wanders off the line and loads the segment sideways.
Laser Welded Crack Chaser is the answer to that in the tuck point & crack chaser part of the range: crack chaser for opening cracks before filling.
For fast cutting concrete, asphalt, hard brick, masonry with laser welded segments.
Why This Version and Not Another
Four geometries: laser-welded tuck point, crack chaser, U-slot and V-shape wave
Applies across the tuck point & crack chaser series, including this item.
Laser-welded segments for side-loaded cutting
Part of how this category is built.
Dia 105-230 mm on standard grinder bores
Part of how this category is built.
Use Guide
Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.
Compared With the Rest of the Category
Tuck Point & Crack Chaser holds 4 items in the programme. The difference between them is geometry and construction, not marketing.
- Laser Welded Tuck Point — laser-welded tuck point for clean joint width
- U-Slot Laser Welded Tuck Point — u-slot tuck point for dusty joint cutting
- V-Shape Wave Crack Chaser — v-shape wave profile for soft abrasive material
- Arrow Segment Diamond Grinding Cup Wheel — arrow segments for fast concrete removal
- Continuous Rim Diamond Grinding Wheel with Slot — slotted rim balancing finish and cooling
- Continuous Rim Diamond Grinding Wheel — continuous rim for smoothing concrete surfaces
Laser Welded Crack Chaser — Questions We Get Asked
What sizes does Laser Welded Crack Chaser come in
The standard programme lists 7 sizes on this page, Item IDs CA105CC to CA230CC. Other sizes are available upon customer's request.
Which bond will you supply for my material
The bond is set per enquiry rather than per catalogue number. Laser welded.
What do you need to quote Laser Welded Crack Chaser
The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.
What is the lead time and minimum order for Laser Welded Crack Chaser
Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)
Others in the Same Part of the Range
Laser Welded Tuck Point
Laser-welded tuck point for clean joint width
View specifications →
U-Slot Laser Welded Tuck Point
U-slot tuck point for dusty joint cutting
View specifications →
V-Shape Wave Crack Chaser
V-shape wave profile for soft abrasive material
View specifications →
Arrow Segment Diamond Grinding Cup Wheel
Arrow segments for fast concrete removal
View specifications →
Continuous Rim Diamond Grinding Wheel with Slot
Slotted rim balancing finish and cooling
View specifications →
Continuous Rim Diamond Grinding Wheel
Continuous rim for smoothing concrete surfaces
View specifications →
Double Row Diamond Grinding Cup Wheel
Double row wheel for long removal runs
View specifications →
L Segment Diamond Grinding Cup Wheel
L segments for edge work on concrete floors
View specifications →Related Technical Guides
Get a quote for Laser Welded Crack Chaser
Send the material, machine and size. You will get a specification and a price, not a catalogue page.