Sanitary Valves and Fittings Built to One Declared Standard
Butterfly, ball, diaphragm and check valves machined, polished and inspected in our own plant in Wenzhou, to AS1528, BS4825, DIN 11864, 3-A, SMS and RJT.
Filtration and Tank Accessories That Do Not Stop the Line
Duplex and multi-bag housings, cartridge and lenticular units, manways, sight glasses and CIP spray devices, sized against your flow rather than a catalogue page.
AISI 304 and 316L With the Finish Written on the Order
Ra 0.8 um as standard, Ra 0.6 and 0.4 um on request, with EN 10204 3.1 material certificates so the specification is provable two years from now.
Hygienic Components for Lines That Have to Prove They Are Clean
Stainless steel sanitary valves, pipe fittings, filter housings and tank accessories machined, polished and assembled in our own plant in Wenzhou, China.
Sanitary Valves
Butterfly Valves · Ball Valves · Diaphragm Valves · Check Valves
Sanitary Fittings
Tees · Elbows · Reducers · Unions · Crosses · Tri-Clamps · Pipe Holders
135 Catalogue Items Across 15 Categories
Every item below is manufactured in our own plant. Click through for specifications, materials and the standards it is made to.
Hygienic Powder Tight Butterfly Valve - Wafer Tri-Clamp Connection
Stainless Steel Forged Hygienic Manual 4way Ball Valve
Stainless Steel Sanitary Pneumatic Bending Tank Bottom Valve
Sanitary Stainless Steel Double-Union NRV Check Valve for Food Processing Equipment
Sanitary Stainless Steel Butt Weld Reducing Tee
BPE Sanitary 180 Degree Clamp U Type Elbow
Stainless Steel Sanitary Clamped Eccentric Reducer
Hygienic Stainless Steel Union Male Part for Sanitary Pipelines
Food Grade Sanitary Clamped Cross for Sanitary Piping Systems
Heavy Duty Sanitary High Pressure Clamp with Bolt Closure
Stainless Steel Pipe Holder with Bolt Nut for Sanitary Applications
Bag Filter Housing Skid with Centrifugal Pump - Mobile Filtration Solution
Hygienic Stainless Steel Round Pressure Manway - Safe & Secure
Sanitary Stainless Steel Sight Glass with Wire Light
Sanitary Stainless Steel Rotary T-Shaped Rotating Spray Cleaning Ball
Sanitary Stainless Steel Clamped Powder Butterfly Valve
3-Piece Sanitary Ball Valve with Pneumatic Actuation
Manual Clamped Diaphragm Valve for Pharmaceutical and Food Industries
Industries We Supply
Process equipment builders, plant engineers and distributors in food and beverage, dairy, pharmaceutical, biotechnology and cosmetic manufacturing.
Food and Beverage Processing
Mixed product runs, tight changeovers and audits that ask you to prove the line was clean. Food and beverage plants need components tha...
Read more →Dairy Processing
Dairy is unforgiving. Protein deposits bake onto any surface rougher than specification and a cold spot in a CIP circuit becomes a pers...
Read more →Pharmaceutical Manufacturing
Every component in a pharmaceutical line has to be defensible on paper as well as in the plant. What matters is the declared standard, ...
Read more →Biotechnology and Fermentation
Fermentation runs are long and expensive and a single contamination event writes off the batch. The components around a fermenter have ...
Read more →Cosmetics and Personal Care
Cosmetic production means viscous product, frequent colour and fragrance changeovers and a plant that has to be visibly clean between b...
Read more →Hygienic Lines Fail at the Joints
Hygienic lines fail at the joints. Rough weld seams, mismatched standards and gaskets that will not survive CIP are what force unplanned shutdowns and failed swab tests. We supply components cut to one declared standard, with a declared surface finish and material certificate behind every piece.
- Dead legs at sample and instrument points that never reach cleaning temperature
- Surface finish quoted as polished with no Ra figure behind it
- Mixed union and ferrule standards so spares never fit the joint that failed
- Seals chosen by default rather than against the actual CIP chemistry
One Manufacturer Six Standards
One direct manufacturer covering AS1528, BS4825, DIN 11864, 3-A, SMS and RJT, so a single order can fit an Australian filler, a European CIP skid and a US dairy line without mixing suppliers.
Made In House
Machining, polishing, assembly and quality inspection all happen in our own plant, which is what makes a non-standard size a normal order rather than an exception.
Finish On the Order
Ra 0.8 um as standard, Ra 0.6 um and Ra 0.4 um on request. The figure goes on the line item so it is repeatable on the second and third order.
Evidence On Request
AISI 304 and 316L as standard, with material certificates to EN 10204 3.1 available so the specification is provable at an audit.
How We Work With Engineers
Three ways buyers use us, depending on whether the problem is a line design, an export standard or a part that does not exist yet.
CIP Ready Hygienic Pipework
Cleaning failures are almost never caused by the cleaning chemical. They are designed into the line at the joints, branches and low points. This is how we specify components so a line cleans on the first pass.
Multi Standard Supply
A machine built in one country is often installed in another. We manufacture to AS1528, BS4825, DIN 11864, 3-A, SMS and RJT, so one supplier can cover an export order without you sourcing each market separately.
OEM and Custom Manufacturing
Machining, polishing, assembly and inspection all happen in our own plant, which is what makes non-standard sizes, special connections and customised finishes practical rather than a special favour.
Guides for Specifying Hygienic Components
Written for the person who has to choose the part, not for search engines.
Sanitary Fitting Standards Compared AS1528 BS4825 DIN SMS and RJT
Six standards, one job. Here is what actually differs between them and how to tell which one your plant already uses bef...
304 or 316L Stainless Steel for Hygienic Process Equipment
Both are supplied as standard on everything in this catalogue. The choice is about chlorides and welding, not about one ...
Surface Finish Ra and Why Polished Is Not a Specification
Ra 0.8 um is the standard finish on everything here, with Ra 0.6 um and Ra 0.4 um available. This is what the figure mea...
Questions Buyers Ask First
The things worth settling before a first order.
Are you a manufacturer or a trading company
We are a direct manufacturer of sanitary valves and stainless steel pipe fittings, based in Wenzhou, China. All products are produced in house, including machining, polishing, assembly and quality inspection.
What sanitary standards do you manufacture to
AS1528, BS4825, DIN 11864, 3-A, SMS and RJT, suitable for food, dairy, beverage and pharmaceutical applications.
Do you provide dimensional drawings
Yes. Standard dimensional drawings are available for reference. For precise dimensions or project-specific requirements, contact our sales team for confirmation.
Can you customise products or provide OEM
Yes. We support OEM and custom manufacturing, including non-standard sizes, special connections and customised finishes.
What materials are available
Our standard materials are AISI 304 and AISI 316L stainless steel. Material certificates to EN 10204 3.1 can be provided on request.
What surface finish can you supply
Ra 0.8 um as standard, with Ra 0.6 um and Ra 0.4 um available as options for higher hygiene requirements.
Send Us the Line Size and the Standard
Tell us the tube size, the media, the working pressure and the standard you work to. We come back with the specification in writing before anything is quoted.