Food and Beverage Processing
Mixed product runs, tight changeovers and audits that ask you to prove the line was clean. Food and beverage plants need components that survive daily CIP and still pass a swab test after a year in service.
What Costs This Sector Money
- Short changeovers leave little time for a full cleaning cycle
- Sugar and pulp bearing product finds every pocket and dead leg in the line
- Retailer and third party audits ask for material and standards evidence on the components, not just the finished plant
What Buyers Ask Us For
- Components made to one declared standard across the whole line
- Surface finish specified and stated rather than assumed
- Seals matched to the actual CIP chemistry and temperature
- Short lead times so a breakdown does not become a week of downtime
Categories That Fit This Sector
Sanitary Butterfly Valves
Compact on-off isolation for hygienic pipework, from a hand lever on a 1 inch transfer line to a pneumatic actuator on a tank outlet.
21 products →
Sanitary Ball Valves
Full bore shut-off where the line must drain clean and the pressure drop has to stay near zero, including 3-way and 4-way diverting bodies.
20 products →
Sanitary Tees
Branch fittings in clamped, welded and union versions, including short outlet, Y-type, U-type and instrument tees.
12 products →
Sanitary Elbows and Bends
45, 90 and 180 degree bends in clamped, welded and threaded versions, including long radius bends for pumped product.
9 products →
Sanitary Strainers and Filter Housings
Bag, cartridge and lenticular housings plus inline strainers, from a single bag unit to a mobile filtration skid with its own pump.
10 products →
Sanitary Spray and Cleaning Balls
Fixed and rotating CIP devices that put cleaning solution on every internal surface of a tank.
4 products →Typical Installations
Filling line product header with branch isolation to each head
Syrup room transfer with inline strainers before the filler
Batch tank with rotating CIP head and a manway for inspection
Hot fill line where seat and gasket material has to survive the temperature
What We Commit To
- Standard catalogue items typically 7-15 days
- Custom and bulk orders quoted with a confirmed date before production
- Material certificates to EN 10204 3.1 on request
- Mixed standards on one order, labelled separately
How an Enquiry Runs
Send the line size, media, working pressure, temperature and the standard you work to. We confirm dimensions, material and finish in writing, then quote with a lead time. Standard items are typically 7-15 days.
Frequently Specified Items
Hygienic Powder Tight Butterfly Valve - Wafer Tri-Clamp Connection
Sanitary Stainless Steel Clamped Powder Butterfly Valve
Stainless Steel Forged Hygienic Manual 4way Ball Valve
3-Piece Sanitary Ball Valve with Pneumatic Actuation
Sanitary Stainless Steel Butt Weld Reducing Tee
Stainless Steel Sanitary Tri-Clamp End U Type Tee
BPE Sanitary 180 Degree Clamp U Type Elbow
Sanitary Stainless Steel 180° U-Type Welded Elbow Bend for Food Processing Systems
How We Work On These Projects
CIP Ready Hygienic Pipework
Cleaning failures are almost never caused by the cleaning chemical. They are designed into the line at the joints, branches and low points. This is ho...
Multi Standard Supply
A machine built in one country is often installed in another. We manufacture to AS1528, BS4825, DIN 11864, 3-A, SMS and RJT, so one supplier can cover...
Related Guides
304 or 316L Stainless Steel for Hygienic Process Equipment
Both are supplied as standard on everything in this catalogue. The choice is about chlorides and welding, not about one grade bein...
CIP Design Checklist for Hygienic Pipework
Most cleaning failures are layout problems, not chemistry problems. Work through this before the line is welded, because afterward...
How to Choose Between Butterfly Ball Diaphragm and Check Valves
Four valve families, four different jobs. Picking on price rather than duty is how you end up with a valve that cleans badly or we...
Food and Beverage Processing FAQ
Questions from buyers in this sector.
Do you supply components for food plants directly
Yes. We are a direct manufacturer, so the valves, fittings, housings and tank accessories on this page are made in our own plant rather than bought in and relabelled.
Can you match the standard already installed in our plant
In most cases yes. We manufacture to AS1528, BS4825, DIN 11864, 3-A, SMS and RJT and also supply DIN 11851 and IDF union patterns. Send photographs with a rule in frame and the key dimensions and we will identify the pattern before quoting.
Specifying a Line for Food and Beverage Processing
Send the drawing or the line list. We will come back with component selections and flag anything in the layout that will cause a cleaning problem.