Pharmaceutical Manufacturing
Every component in a pharmaceutical line has to be defensible on paper as well as in the plant. What matters is the declared standard, the declared finish, the material certificate and the ability to repeat all three on the next order.
What Costs This Sector Money
- Components supplied without traceable material documentation
- Crevices at joints that make cleaning validation harder than it needs to be
- Dynamic seals in the product path on high purity water duty
- Finish quoted as polished with no figure attached
What Buyers Ask Us For
- EN 10204 3.1 material certificates on request
- Aseptic joint geometry such as DIN 11864 where a crevice-free seal is required
- Diaphragm valves that keep the mechanism out of the product path
- Ra 0.6 um and Ra 0.4 um finishes where the standard finish is not enough
Categories That Fit This Sector
Sanitary Diaphragm Valves
The valve to use when the actuation mechanism must be completely isolated from the product, for high purity water, media and sterile transfer.
15 products →
Sanitary Unions
Threaded union sets that let a line be broken and remade by hand, in DIN 11851, DIN 11864, SMS, RJT and IDF patterns.
7 products →
Sanitary Ball Valves
Full bore shut-off where the line must drain clean and the pressure drop has to stay near zero, including 3-way and 4-way diverting bodies.
20 products →
Sanitary Strainers and Filter Housings
Bag, cartridge and lenticular housings plus inline strainers, from a single bag unit to a mobile filtration skid with its own pump.
10 products →
Sanitary Tees
Branch fittings in clamped, welded and union versions, including short outlet, Y-type, U-type and instrument tees.
12 products →Typical Installations
Purified water ring main with diaphragm valve take-off points
Sterile media addition into a fermenter
Filtration train ahead of a filling suite
Aseptic joints on a transfer line built to DIN 11864
What We Commit To
- Material certificates to EN 10204 3.1 on request
- Declared surface finish stated on the order and held in production
- Standard dimensional drawings for reference before purchase
- Non-standard sizes and special connections made to your drawing
How an Enquiry Runs
Send the line size, media, working pressure, temperature and the standard you work to. We confirm dimensions, material and finish in writing, then quote with a lead time. Standard items are typically 7-15 days.
Frequently Specified Items
Stainless Steel Sanitary Pneumatic Bending Tank Bottom Valve
Manual Clamped Diaphragm Valve for Pharmaceutical and Food Industries
Hygienic Stainless Steel Union Male Part for Sanitary Pipelines
DIN11864 Union Male for Stainless Steel Food Processing Equipment
Stainless Steel Forged Hygienic Manual 4way Ball Valve
3-Piece Sanitary Ball Valve with Pneumatic Actuation
Bag Filter Housing Skid with Centrifugal Pump - Mobile Filtration Solution
Stainless Steel Duplex Multi-Bag Filter Housing - Uninterrupted Flow
How We Work On These Projects
CIP Ready Hygienic Pipework
Cleaning failures are almost never caused by the cleaning chemical. They are designed into the line at the joints, branches and low points. This is ho...
Multi Standard Supply
A machine built in one country is often installed in another. We manufacture to AS1528, BS4825, DIN 11864, 3-A, SMS and RJT, so one supplier can cover...
Related Guides
304 or 316L Stainless Steel for Hygienic Process Equipment
Both are supplied as standard on everything in this catalogue. The choice is about chlorides and welding, not about one grade bein...
CIP Design Checklist for Hygienic Pipework
Most cleaning failures are layout problems, not chemistry problems. Work through this before the line is welded, because afterward...
How to Choose Between Butterfly Ball Diaphragm and Check Valves
Four valve families, four different jobs. Picking on price rather than duty is how you end up with a valve that cleans badly or we...
Pharmaceutical Manufacturing FAQ
Questions from buyers in this sector.
Do you supply components for pharmaceutical plants directly
Yes. We are a direct manufacturer, so the valves, fittings, housings and tank accessories on this page are made in our own plant rather than bought in and relabelled.
Can you match the standard already installed in our plant
In most cases yes. We manufacture to AS1528, BS4825, DIN 11864, 3-A, SMS and RJT and also supply DIN 11851 and IDF union patterns. Send photographs with a rule in frame and the key dimensions and we will identify the pattern before quoting.
Specifying a Line for Pharmaceutical Manufacturing
Send the drawing or the line list. We will come back with component selections and flag anything in the layout that will cause a cleaning problem.