Furniture Manufacturing
Panels specified for automated cutting, banding and finishing lines.
What Goes Wrong in This Sector
- Component rejects traced back to thickness variation rather than to the machine
- Melamine faces chipping at the saw and slowing the whole line
- Decor colours that do not match when a customer reorders a matching unit
- Edge fixings stripping out of a core that was lighter than the datasheet said
What Buyers Actually Ask For
- Consistent thickness across pallets for nesting and dowel drilling
- Faced panels that arrive finished, removing an in-house lamination step
- A glue class that matches the destination market's emission rules
- Repeatable decor batches across a long-running product line
Categories That Fit This Work
Melamine Particle Board
Particle board pre-faced with melamine decor paper, the standard panel of volume furniture production.
Explore Range
Melamine Faced MDF
MDF pressed with melamine impregnated paper for a finished, wipe-clean surface straight off the pallet.
Explore Range
MDF Board
Standard medium density fibreboard for painted furniture, routed doors and interior joinery.
Explore Range
Particle Board
Resin-bonded wood particle panels for high-volume furniture and carcass work.
Explore Range
Commercial Plywood
General-purpose plywood for furniture carcasses, packaging and interior joinery where cost per sheet decides the order.
Explore Range
Laminated MDF
MDF supplied with a bonded decorative laminate face, ready to cut and assemble.
Explore Range
Blockboard
Solid timber core board faced with veneer, for long spans that must not sag.
Explore Range
Fancy Plywood
Decorative face plywood in natural and reconstituted veneers for visible furniture and interior surfaces.
Explore RangeWhere the Material Ends Up
- Wardrobe and kitchen carcasses cut on a beam saw and banded in line
- Painted and routed door fronts machined from plain MDF
- Flat-pack furniture components drilled for dowel and cam fittings
- Office desking and storage produced against a contract colour
How Orders in This Sector Are Handled
Free samples so your finishing line can test adhesion and colour first
Panels produced and packed in accordance with your stated requirements
Typical lead time of 15 days after deposit or L/C at sight
Pallet or loose packing to suit your unloading equipment
Recommended Products
MFC Melamine Face Chipboard
MFC Melamine Face Chipboard is supplied at Tolerance +/-0.2mm (thickness<6mm), +/-0.3~0.5mm... thick, with...
View Specification
Both Sides Melamine Chipboard
Both Sides Melamine Chipboard is supplied at Tolerance +/-0.2mm (thickness<6mm), +/-0.3~0.5mm... thick, with...
View SpecificationNatural Waterproofing Mirror Melamine Faced MDF
Natural Waterproofing Mirror Melamine Faced MDF is supplied in 1220*2440mm, at 1-25mm thick, with E0/E1/E2/Melamine...
View Specification
Mirror Melamine Faced MDF
Mirror Melamine Faced MDF is supplied in 1220*2440mm, at 1-25mm thick, with E0/E1/E2/Melamine glue/Phenolic wbp glue...
View SpecificationE2 Glue MDF Board
E2 Glue MDF Board is supplied at Tolerance +/-0.2mm (thickness<6mm), +/-0.3~0.5mm... thick, with MDF Board Size(mm)...
View Specification
Red MDF Board
Red MDF Board is supplied at Tolerance +/-0.2mm (thickness<6mm), +/-0.3~0.5mm... thick, with WR,WBP,E0,E1,E2 glue...
View SpecificationOSB1 OSB2 OSB3 Board
OSB1 OSB2 OSB3 Board is supplied at Tolerance +/-0.2mm (thickness<6mm), +/-0.3~0.5mm... thick, with WR,WBP,E0,E1,E2...
View Specification
Multi Colors OSB Panel
Multi Colors OSB Panel is supplied at Tolerance +/-0.2mm (thickness<6mm), +/-0.3~0.5mm... thick, with WR,WBP,E0,E1,E2...
View SpecificationFurniture Manufacturing Questions
Can you hold one decor colour across repeat orders?
What is the minimum order for one panel specification?
Do you supply raw panels as well as faced ones?
Talk To Us About Furniture Manufacturing
Tell us the product, the size and the volume. We will come back with a specification and a price, and samples are free.