Bruckner Stenter Chain Type 3
Bruckner stenter chain in our third pattern, for machines with the oil-free guide. Black finish, metal construction, 0.65 kg reference weight. Bruckner rails differ across machine generations, so we hold four patterns and match against a sample link before production.
Key Benefits
- Third Bruckner chain pattern held alongside the other three
- Built for the oil-free guide with high quality bearings
- Available with grease or without grease
- Matched against your sample link so the pitch is confirmed before production
Application Scenarios
- Bruckner rails on the third chain pattern
- Full rail rebuilds at a planned shutdown
- Machines recommissioned after long storage
Who It Is For
- Dyeing and finishing mills running Bruckner stenters
- Maintenance teams planning a chain overhaul during a shutdown
- Textile machinery service companies rebuilding rails on customer sites
Problems It Solves
- A stretched chain drops fabric tension, so the cloth leaves the machine narrow even with good pins.
- Bruckner chain ordered on the brand name alone arriving with the wrong pitch.
- Waiting on an OEM chain order keeps the whole finishing line out of production.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: Monforts stenter (Oil-free guide)
- Material: metal
- Type: with grease and without grease
- Colour: black
- Weight: 0.65kg
- Brand: YH
Specifications
| Application | Monforts stenter (Oil-free guide) |
|---|---|
| Material | metal |
| Type | with grease and without grease |
| Colour | black |
| Weight | 0.65kg |
| Brand | YH |
| Origin | Zhejiang, China |
| Delivery Time | Within 7 days |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Chain matched from your sample link
- With grease or without grease
- Cut to rail length with joining links
How It Compares
| Compared With | What Changes |
|---|---|
| Bruckner chain types 1, 2 and 4 | Four patterns differing in pitch and mounting. Send a sample link and we will confirm which one your rail runs. |
| Monforts chain | Different brand, different pitch. Not interchangeable. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Chain Customisation for New Fabric Types — Change the chain and the machine can work for other types of fabric, without buying another stenter.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
Oil-Free or Lubricated Stenter Guides
An oil-free guide keeps lubricant away from the fabric using graphite strips and PEEK sliders. A lubricated guide uses a grease film. The chain is different for each, and mixing them is a costly mistake.
Read Guide
Why Fabric Leaves the Stenter Narrower Than It Should
Width loss is almost always a grip problem, not a setting problem. Work through the rail in order: brush, pins or clips, holders, chain, guide.
Read Guide
Stenter Chain Maintenance and Lubrication
Clean the guide and chain at least once a year, use a high temperature grease, and measure pitch over ten links before you decide to replace anything.
Read GuideBruckner Stenter Chain Type 3 Questions
How do I tell the Bruckner chain patterns apart?
Measure the pitch over ten links and photograph the link plate and slider. We match it against our four patterns.
What does with grease and without grease mean?
Whether the chain is supplied pre-greased for a lubricated rail or dry for an oil-free guide. Tell us which your machine uses.
Do you supply Bruckner clips and pin plates too?
Yes, along with Bruckner brush wheels and lubrication parts. See the Bruckner category.
Can you cut the chain to my rail length?
Yes, with the joining links counted in.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.