Artos Stenter Chain Copper Slider Second Pattern
The second Artos copper-slider chain pattern in our range. Same oil-free guide construction and the same connectors, U-shaped connectors, pins, PEEK bush, PEEK dust cover, screws and wear sleeves assembly, a different pitch and mounting. Artos rails changed over the machine's production life, so match the chain against a sample link rather than the machine name.
Key Benefits
- Covers Artos rails the first copper-slider pattern does not fit
- Copper slider against the guide, PEEK bush on the pin
- High quality bearings for long service life
- Confirmed against your sample link before production
Application Scenarios
- Older Artos rails on a different chain pitch
- Mills running two Artos generations
- Used Artos machines recommissioned without parts records
Who It Is For
- Dyeing and finishing mills running Artos stenters
- Maintenance teams planning a chain overhaul during a shutdown
- Textile machinery service companies rebuilding rails on customer sites
Problems It Solves
- A stretched chain drops fabric tension, so the cloth leaves the machine narrow even with good pins.
- Ordering chain on the machine brand alone and finding the pitch is wrong.
- Waiting on an OEM chain order keeps the whole finishing line out of production.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: Monforts stenter (Oil-free guide)
- Material: metal
- Type: with grease and without grease
- Colour: black
- Weight: 0.65kg
- Brand: YH
Specifications
| Application | Monforts stenter (Oil-free guide) |
|---|---|
| Material | metal |
| Type | with grease and without grease |
| Colour | black |
| Weight | 0.65kg |
| Brand | YH |
| Origin | Zhejiang, China |
| Delivery Time | Within 7 days |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Chain matched from a sample link
- Copper or PEEK slider
- Cut to your rail length
How It Compares
| Compared With | What Changes |
|---|---|
| Artos chain with copper slider, first pattern | Different pitch and mounting for a different Artos rail. Send us a sample link and we will confirm which you need. |
| Artos chain with PEEK slider | Same chain family, different wear surface against the rail. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Chain Customisation for New Fabric Types — Change the chain and the machine can work for other types of fabric, without buying another stenter.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
Oil-Free or Lubricated Stenter Guides
An oil-free guide keeps lubricant away from the fabric using graphite strips and PEEK sliders. A lubricated guide uses a grease film. The chain is different for each, and mixing them is a costly mistake.
Read Guide
Why Fabric Leaves the Stenter Narrower Than It Should
Width loss is almost always a grip problem, not a setting problem. Work through the rail in order: brush, pins or clips, holders, chain, guide.
Read Guide
Stenter Chain Maintenance and Lubrication
Clean the guide and chain at least once a year, use a high temperature grease, and measure pitch over ten links before you decide to replace anything.
Read GuideArtos Stenter Chain Copper Slider Second Pattern Questions
How do I identify my Artos chain?
Measure the pitch over ten links and photograph the slider and the plate mounting. Send us both.
Do you supply a joining link?
Yes, counted against the rail length on your order.
What grease should I use?
High-temperature grease, DuPont, Miller or Kluber grade, added at every annual service.
Can you make chain parts only?
Yes. Connectors, U-shaped connectors, pins, PEEK bush, dust cover, screws and wear sleeves are all available on their own.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.