Bollards
Steel Safety Bollards
A steel safety bollard is a length of heavy wall pipe on a bolt-down base plate, set where a fork truck would otherwise reach something expensive.…
View specifications
Complete Range
Every S&L Product Line On One Page
21 product lines across 11 categories, with the published model codes and specification tables behind each one. No pagination and nothing held back.
- Bollards
- Machine Guards
- Dock Boards
- Wheel Chocks
- Trailer Jacks
- Steel Hoppers
- Drum Caddies and Carts
- Drum Clutchers
- Rotating Drum Carts
- Stackable Drum Racks
- Fork Mounted Drum Grabs
Dock Equipment
Everything that keeps a trailer still, a forklift level and a person out of the way at the dock face.
Bollards
Bolt-down steel pipe bollards that stop a fork truck before it reaches the thing you care about.
Machine Guards
Floor-mounted rail guards that keep traffic off machines, control panels and work cells.
Machine Guards
Machine Guard Rails
A machine guard rail protects a line rather than a point. Two bolt-down posts carry one or two horizontal rails along the aisle side of a machine, a…
View specifications
Machine Guards
Rack Guards
A rack guard is deliberately low. At 9 inches it takes the hit from a fork tine or a pallet corner without fouling the pallet that has to be entered…
View specificationsDock Boards
Aluminium and steel dock boards that bridge the gap between a dock and a trailer bed.
Dock Boards
Aluminium Dock Boards
An aluminium dock board bridges the gap and the height difference between a dock edge and a trailer bed. The S&L TAS series publishes 21 models…
View specifications
Dock Boards
Steel Dock Boards and Plates
Where a bay runs steel-wheeled trucks, castings or swarf-laden pallets, a steel deck outlasts an aluminium one. The S&L steel range uses diamond…
View specificationsWheel Chocks
Rubber, cast iron and steel chocks that hold a trailer still while it is being loaded.
Wheel Chocks
Wheel Chocks
A wheel chock is the cheapest thing on a loading dock and the one that most often is not there. S&L lists six models, SL-WC-01 to SL-WC-06, across…
View specificationsTrailer Jacks
Screw and ratchet stabilising jacks rated from 50,000 lb to 100,000 lb static load.
Trailer Jacks
SL-TJ-01 Screw Trailer Stabilising Jack
SL-TJ-01 is the lightest jack in the S&L range and the only one without wheels. At 35 lb it is carried out to a parked trailer by one person, set on…
View specifications
Trailer Jacks
SL-TJ-02 Wheeled Trailer Stabilising Jack
SL-TJ-02 doubles the static rating of the carried jack and adds a published lifting capacity. It rolls out to the trailer on 10 inch semi-pneumatic…
View specifications
Trailer Jacks
SL-TJ-03 Ratchet Screw Trailer Jack
SL-TJ-03 is the only jack in the range that spreads its load along a beam rather than through a single cap. A 6 inch beam sits across the front of…
View specifications
Trailer Jacks
SL-TJ-04 Two-Way Ratchet Trailer Jack
SL-TJ-04 pairs a two-way ratchet with a 2 inch diameter screw, the thickest column in the S&L range. The two-way action means the operator raises and…
View specifications
Trailer Jacks
SL-TJ-05 Heavy Duty Two-Way Ratchet Trailer Jack
SL-TJ-05 is the top of the S&L jack range: the highest lifting rating at 50,000 lb, the largest wheels at 16 inches and the tallest service range at…
View specificationsMaterial Handling
Steel drum and scrap handling gear that a forklift or one operator can move without a crane.
Steel Hoppers
Self-dumping forklift hoppers from a quarter cubic yard to five cubic yards.
Steel Hoppers
Low Profile Self-Dumping Hoppers
A low profile hopper is the one that fits under a machine bed, a press bolster or a conveyor discharge. The smallest in this range stands 18-1/4…
View specifications
Steel Hoppers
Stackable Self-Dumping Hoppers
The HOP series is the core of the S&L hopper range: eighteen published models across three duty classes. The duty class is set by the steel gauge, 12…
View specifications
Steel Hoppers
Heavy Duty Self-Dumping Hoppers
This is the specification sheet buyers ask for when the hopper has to match a particular fork truck. Every size lists the fork opening at 7-1/2 by…
View specificationsDrum Caddies and Carts
Straddle caddies that let one operator move a full 55 gallon drum across a plant floor.
Drum Caddies and Carts
Drum Caddies and Carts
A drum caddy straddles the base of a drum and takes its weight on four wheels, so one person moves a full 55 gallon drum instead of walking it on its…
View specificationsDrum Clutchers
Rim-gripping drum clutchers for hoist, crane and fork truck lifting of steel drums.
Drum Clutchers
Drum Clutchers
A drum clutcher grips a steel drum under its rolling hoop and tightens as the load comes on, so a hoist or crane can lift a sealed drum without a…
View specificationsRotating Drum Carts
Cradle carts that transport a drum and then rotate it to a controlled pouring angle.
Rotating Drum Carts
Deluxe Rotating Drum Carts
A rotating drum cart carries a drum horizontally in a cradle and lets the operator turn it to a pouring angle and hold it there. The RDC-1000 series…
View specifications
Rotating Drum Carts
Economy Rotating Drum Carts
The RDC-60 series is built around a different assumption from the deluxe range: that the cart often stays in one place. It starts at 27 lb with no…
View specificationsStackable Drum Racks
Horizontal drum racks rated to 1,600 lb and 2,400 lb that stack two and three high.
Stackable Drum Racks
Stackable Drum Racks
Storing drums horizontally on a rack does two things at once: it recovers floor space and it puts the bung at the bottom where a tap can be fitted.…
View specificationsFork Mounted Drum Grabs
Fork-mounted grabs and lifters that turn a standard fork truck into a drum handler.
Fork Mounted Drum Grabs
Fork Mounted Drum Grabs
A fork mounted drum grab slides onto the forks of a truck you already own and turns it into a drum handler. S&L lists two models: S-S-55 for a single…
View specifications
Fork Mounted Drum Grabs
Fork Mounted Drum Lifters
The FDG lifters are the light end of the S&L fork mounted range: 45 lb, rated 800 lb, and the only fork attachment in the range published for 30…
View specificationsQuestions
About This Product List
How many products are listed here?
21 product lines across 11 categories, all on this one page with no pagination.
Are all of these made by S&L?
Yes. Every line here comes from the S&L range published by the company itself.
How do I get a price?
Email the model codes, quantities and destination port to [email protected].
Is there a printable list?
Yes, the product catalogue PDF in the Download Centre lists every line and the extent of its published specification data.
Quote Across The Whole Range
One quotation can cover dock equipment and material handling together. Send the model codes with quantities and the destination port.