Golden Brushed Steel Lettering
Hair salons, jewellers and boutique signage where the letters sit directly on a brushed metal backing plate.
View specification
Solid Cutting Letters · Flat Cut Metal Letters
Flat cut solid polished stainless letters, one piece of genuine 304 or 316 material with the cut side polished to match the face. Different thicknesses and sizes are available, including very slim and very small characters.
Flat cut solid polished stainless letters, one piece of genuine 304 or 316 material with the cut side polished to match the face. Different thicknesses and sizes are available, including very slim and very small characters.
Best for. Door plates, lift lobby wording and small-scale wayfinding that has to look solid at close range.
Watch out. Solid material makes the price rise quickly with thickness; check the thickness against the viewing distance.
Door plates, lift lobby wording and small-scale wayfinding that has to look solid at close range. It sits in our salons clinics and boutiques work more often than anywhere else.
A fabricated letter under about 100mm high starts to look clumsy: the return is disproportionate and the soldered seam sits right where the eye is. Flat cut solid stainless removes the return entirely, which is why it is the right construction for small and slim work.
Small independent venues order small quantities of small letters, read from close up, on walls that were not built for signage. That is a different problem from a mall fascia. See the single letter and low volume orders route for how this is specified on a live job.
These points are reproduced from our own production specification for Solid Stainless Steel Letters 02. Nothing has been added to them.
| Construction | Solid cut from one piece, no return or cavity |
|---|---|
| Material | Genuine 304 or 316 grade stainless steel |
| Surface finish | Polished |
| Illumination | Not illuminated |
| Fixing method | Back screw bolt, 3M double-sided adhesive tape |
| Supplied with the order | 1:1 scale mounting template |
| Colour matching | Any colour from a Pantone or RAL code confirmed before production |
| Environment | Outdoor and indoor use |
| Production time | 5 to 7 days |
| Shipping | DHL or UPS express door to door, approximately 4 to 5 days |
| Payment terms | T/T, Western Union, PayPal |
| Minimum order quantity | None; any order quantity accepted |
TBC means the figure is not stated on our original specification and has not been estimated.
Genuine 304 or 316 grade stainless steel Finish: polished.
Solid cut from one piece, no return or cavity. Artwork in AI, EPS or CDR fixes the geometry before anything is cut.
Joints are dressed before finishing, and illuminated builds are wired and lit before the back is closed. Formal QC documentation is TBC.
Factory level certification is TBC and is not claimed on this site.
Two builds cut from solid 304 or 316 stainless, one polished and one in a golden brushed finish, with the cut edge finished as carefully as the face.
The alternative constructions in this catalogue are set out in fabricated or flat cut which construction to use, and the illumination choices in frontlit backlit or edge lit.
Solid material makes the price rise quickly with thickness; check the thickness against the viewing distance.
The wording is read from close range on a brushed metal backing plate, where a fabricated letter's return and soldered seam would have dominated the small letterforms.
Process GuideThe construction decision is usually made by the letter height, and getting it wrong is visible from two metres away.
DownloadsMaterials, finishes, fixings and lead times in one PDF, plus the full catalogue as a CSV.
Genuine 304 or 316 grade stainless steel. The construction is solid cut from one piece, no return or cavity. Surface finish: polished.
Production runs 5 to 7 days. Add roughly 4 to 5 days for DHL or UPS express door to door, and allow time for artwork approval before production starts.
Fixing is by back screw bolt, 3m double-sided adhesive tape. The order includes 1:1 scale mounting template. Set the letters out from the template rather than by eye.
Solid material makes the price rise quickly with thickness; check the thickness against the viewing distance.
Yes. There is no minimum order quantity on this catalogue and any order quantity is accepted. Shipping cost per letter falls sharply once several travel in the same carton, so order a full word together where you can.
Send the artwork and the finished letter height and the quotation comes back with the production window and the shipping estimate attached.